Thermal analysis on phase behavior of poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactic acid) interacting with aliphatic polyesters

Abstract  

Thermal behavior, miscibility, and crystalline morphology in blends of low-molecular-weight poly(l-lactic acid) (LM_w-PLLA) or high-molecular-weight PLLA (HM_w-PLLA) with various polyesters such as poly(butylene adipate) (PBA), poly(ethylene adipate) (PEA), poly(trimethylene adipate) (PTA), or poly(ethylene succinate) (PESu), respectively, were explored using differential scanning calorimeter (DSC), and polarized-light optical microscopy (POM). Phase behavior in blends of PLLA with other polyesters has been intriguing and not straight forward. Using a low- and high molecular weight PLLA, this study aimed at mainly using thermal analyses for probing the phase behavior, phase diagrams, and temperature dependence of blends systems composed of PLLA of two different molecular weights (low and high) with a series of aliphatic polyesters of different structures varying in the (CH₂/CO) ratio in main chains. The blends of LM_w-PLLA/PEA and LM_w-PLLA/PTA show miscibility in melt and amorphous glassy states. Meanwhile, the LM_w-PLLA/PESu blend is immiscible with an asymmetry-shaped upper critical solution temperature (UCST) at 220–240 °C depending on the blend composition. In contrast to miscibility in LM_w-PLLA/PTA and LM_w-PLLA/PEA blends, HM_w-PLLA with polyesters are mostly immiscible; and HM_w-PLLA/PTA blend is the only one showing an asymmetry-shaped UCST phase diagram with clarity points at 195–235 °C (depending on composition). Reversibility of UCST behavior, with no chemical transreactions, in these blends was proven by solvent recasting, gel permeation chromatography, and Fourier transform infrared spectroscopy (FT-IR). Crystalline morphology behavior of the LM_w-PLLA/PEA and LM_w-PLLA/PTA blends furnishes addition evidence for miscibility in the amorphous phase between LM_w-PLLA and PTA or PEA.     

Three-dimensionally crossing manifold micro-mixer for fast mixing in a short channel length

In this study, we report a neo-conceptive three-dimensionally (3D) crossing manifold micromixer (CMM) embedded in microchannel. Fabricated by sequential processes of photolithography and two photon absorption stereolithography, this leads to a microfluidic system with a built-in micromixer in a site controlled manner. The effectiveness of CMM is investigated numerically and experimentally. Through the numerical simulation, it is estimated that a high mixing ratio of 90% can be obtained even in a channel length shorter than five times the channel width. This compares well with the conventional passive type of micromixers that have a gradual increase in mixing efficiency with the length of the channel. Furthermore, the mixing performance of the realized CMM built-in microchannel is observed by confocal microscopy.     

Mesoporous layer-by-layer ordered nanohybrids of layered double hydroxide and layered metal oxide: highly active visible light photocatalysts with improved chemical stability

Mesoporous layer-by-layer ordered nanohybrids highly active for visible light-induced O(2) generation are synthesized by self-assembly between oppositely charged 2D nanosheets of Zn-Cr-layered double hydroxide (Zn-Cr-LDH) and layered titanium oxide. The layer-by-layer ordering of two kinds of 2D nanosheets is evidenced by powder X-ray diffraction and cross-sectional high resolution-transmission electron microscopy. Upon the interstratification process, the original in-plane atomic arrangements and electronic structures of the component nanosheets remain intact. The obtained heterolayered nanohybrids show a strong absorption of visible light and a remarkably depressed photoluminescence signal, indicating an effective electronic coupling between the two component nanosheets. The self-assembly between 2D inorganic nanosheets leads to the formation of highly porous stacking structure, whose porosity is controllable by changing the ratio of layered titanate/Zn-Cr-LDH. The resultant heterolayered nanohybrids are fairly active for visible light-induced O(2) generation with a rate of ～1.18 mmol h(-1) g(-1), which is higher than the O(2) production rate (～0.67 mmol h(-1) g(-1)) by the pristine Zn-Cr-LDH material, that is, one of the most effective visible light photocatalysts for O(2) production, under the same experimental condition. This result highlights an excellent functionality of the Zn-Cr-LDH-layered titanate nanohybrids as efficient visible light active photocatalysts. Of prime interest is that the chemical stability of the Zn-Cr-LDH is significantly improved upon the hybridization, a result of the protection of the LDH lattice by highly stable titanate layer. The present findings clearly demonstrate that the layer-by-layer-ordered assembly between inorganic 2D nanosheets is quite effective not only in improving the photocatalytic activity of the component semiconductors but also in synthesizing novel porous LDH-based hybrid materials with improved chemical stability.     

Total synthesis of bryostatin 7 via C-C bond-forming hydrogenation

The marine macrolide bryostatin 7 is prepared in 20 steps (longest linear sequence) and 36 total steps with five C-C bonds formed using hydrogenative methods. This approach represents the most concise synthesis of any bryostatin reported, to date.     

Studies on mass production of transformed Panax ginseng hairy roots in bioreactor

The growth properties of Panax ginseng hairy roots transformed by Agrobacterium rhizogenes were compared between flask and aerated column or stirred bioreactor. In flask cultures, sucrose, initially 30 g/L, was nearly exhausted after 45 d of culture. The pH of the medium dropped from 5.5 to 4.96 after 10 d, but afterward it gradually increased to 6.4. After 45 d, hairy roots grew about 16-folds. The growth rate of hairy roots in air-bubble column or stirred bioreactor cultures was 1.13 (1.11) to 1.23 (1.20) g fresh wt (dry wt)/(g of cells·d), respectively. For both bioreactors, growth was about three times as high as in the flask cultivation.     

Basicities of thiazole heterocyclic compounds and the reaction of 3-methyl-2-methylimino-Δ4-thiazolines with ethyl bromoacetate and 2-bromoacetophenone

The pK_a′s of several thiazole heterocyclic compounds have been determined and represent products with significantly high values. Because of their high basicities, sometimes these compounds were able to act as not only nucleophiles but also strong organic bases. 4-Substituted-3-methyl-2-methylimino-Δ⁴-thiazolines 5a-d reacted with ethyl bromoacetate in refluxing benzene, giving the corresponding N-alkylated salts 8a-d , while the products obtained from the reaction with 2-bromoacetophenone in the presence of base were pyrrolothiazines 10b-d.     

Synthesis and characteristics of novel chelate fiber containing amine and amidine groups

A polyacrylonitrile (PAN) fiber was adopted for the backbone of a chelate polymer and poly(acrylo‐amidino ethylene amine) (PAEA) was prepared through a one‐step reaction between the PAN fiber and ethylenediamine (EDA). The maximum removal capacity and degree of substitution were 7.8 meq per gram of dried PAEA and 98%, respectively. The PAEA was tested as an adsorbent in single and two‐component metal aqueous solutions under changing pH. The Cu²⁺ ion accomplished maximum adsorption amount at pH 3 and the order of maximum adsorbed amounts on PAEA is Cu²⁺ > Ag⁺ > Zn²⁺ > Ni²⁺ > Pb²⁺ in molar basis. FT‐IR spectroscopy was employed to characterize the chemical bonding in metal aqueous solutions and surface morphology was examined using atomic force microscopy (AFM) and scanning electron microscopy (SEM). Copyright © 2004 John Wiley & Sons, Ltd.     

Influence of the cation size on the framework structures and space group centricities in AMo2O5(SeO3)2 (A = Sr, Pb, and Ba)

Two new quaternary mixed-metal selenites, SrMo(2)O(5)(SeO(3))(2) and PbMo(2)O(5)(SeO(3))(2), have been synthesized as crystals and pure polycrystalline phases by standard solid-state reactions using SrMoO(4), PbO, MoO(3), and SeO(2) as reagents. The crystal structures of the reported materials have been determined by single-crystal X-ray diffraction. SrMo(2)O(5)(SeO(3))(2) and PbMo(2)O(5)(SeO(3))(2) are isostructural and crystallized in the triclinic centrosymmetric space group P1? (No. 2). The reported materials exhibit chain structures consisting of MoO(6) octahedra and asymmetric SeO(3) polyhedra. Complete characterizations including IR spectroscopy and thermal analyses for the compounds are also presented, as are dipole moment calculations. In addition, the powder second-harmonic-generating (SHG) properties of noncentrosymmetric polar BaMo(2)O(5)(SeO(3))(2) have been measured using 1064 nm radiation. Through powder SHG measurement, we are able to determine that BaMo(2)O(5)(SeO(3))(2) has a SHG efficiency of approximately 80 times that of α-SiO(2). Additional SHG measurements reveal that the material is phase-matchable (type 1). A detailed cation size effect on the symmetry and framework structure is discussed.     

Single-photon vacuum-ultraviolet laser-pulsed-field ionization-photoelectron studies of trans- and cis-1-bromopropenes

The vacuum-ultraviolet (VUV) pulsed-field ionization-photoelectron (VUV-PFI-PE) spectra of trans-1-bromopropene (trans-CH(3)CH[Double Bond]CHBr) and cis-1-bromopropene (cis-CH(3)CH[Double Bond]CHBr) have been measured in the energy region of 74 720-76 840 cm(-1). The simulation of fine structures observed in the origin VUV-PFI-PE vibrational bands of these molecules has provided the ionization energies (IEs) of trans-1-bromopropene and cis-1-bromopropene to be 74 779.3+/-2.0 cm(-1) (9.2715+/-0.0002 eV) and 75 140.2+/-2.0 cm(-1) (9.3162+/-0.0002 eV), respectively. The vibrational bands resolved in these VUV-PFI-PE spectra at energies 0-1700 cm(-1) above the IEs of trans-1-bromopropene and cis-1-bromopropene have been assigned based on theoretical vibrational frequencies and calculated Franck-Condon factors for the ionization transitions.     

Gold Nanorod–Photosensitizer Complex Obtained by Layer‐by‐Layer Method for Photodynamic/Photothermal Therapy In Vitro

Gold nanorod (GNR)–photosensitizer (PS) complex was prepared using anionic PS (sodium salt of purpurin‐18) and cationic poly(allylamine hydrochloride) by layer‐by‐layer method, and was characterized by transmission electron microscopy, UV‐vis spectroscopy, and zeta potential. The GNR–PS complex is a promising agent for synergistic (photothermal and photodynamic) therapy (PTT/PDT), in which PTT generates heat as well as operates the PS release which maximize the following PDT activity. The combined dual therapy, PTT followed by PDT, exhibits a significantly higher photocytotoxicity result based on synergistic effect of hyperthermia from PTT as well as singlet oxygen photogeneration from PDT.