Fluorene‐based alternating polymers containing electron‐withdrawing bithiazole units: Preparation and device applications

We report here the synthesis via Suzuki polymerization of two novel alternating polymers containing 9,9‐dioctylfluorene and electron‐withdrawing 4,4′‐dihexyl‐2,2′‐bithiazole moieties, poly[(4,4′‐dihexyl‐2,2′‐bithiazole‐5,5′‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)] (PHBTzF) and poly[(5,5′‐bis(2″‐thienyl)‐4,4′‐dihexyl‐2,2′‐bithiazole‐5″,5″‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)] (PTHBTzTF), and their application to electronic devices. The ultraviolet–visible absorption maxima of films of PHBTzF and PTHBTzTF were 413 and 471 nm, respectively, and the photoluminescence maxima were 513 and 590 nm, respectively. Cyclic voltammetry experiment showed an improvement in the n‐doping stability of the polymers and a reduction of their lowest unoccupied molecular orbital energy levels as a result of bithiazole in the polymers' main chain. The highest occupied molecular orbital energy levels of the polymers were ?5.85 eV for PHBTzF and ?5.53 eV for PTHBTzTF. Conventional polymeric light‐emitting‐diode devices were fabricated in the ITO/PEDOT:PSS/polymer/Ca/Al configuration [where ITO is indium tin oxide and PEDOT:PSS is poly(3,4‐ethylenedioxythiophene) doped with poly(styrenesulfonic acid)] with the two polymers as emitting layers. The PHBTzF device exhibited a maximum luminance of 210 cd/m² and a turn‐on voltage of 9.4 V, whereas the PTHBTzTF device exhibited a maximum luminance of 1840 cd/m² and a turn‐on voltage of 5.4 V. In addition, a preliminary organic solar‐cell device with the ITO/PEDOT:PSS/(PTHBTzTF + C₆₀)/Ca/Al configuration (where C₆₀ is fullerene) was also fabricated. Under 100 mW/cm² of air mass 1.5 white‐light illumination, the device produced an open‐circuit voltage of 0.76 V and a short‐circuit current of 1.70 mA/cm². The fill factor of the device was 0.40, and the power conversion efficiency was 0.52%. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1845–1857, 2005     

Sonocrystallization of polycarbonate melts

In this paper, we showed the simplified continuous process to crystallize the polycarbonate (PC) melts using sonocrystallization which is based on ultrasonic cavitation and ‘hot spot’ theory. High power ultrasonic wave was introduced to crystallize the PC prepolymers which is generally used for solid‐state polymerization (SSP) to obtain the ultra‐high molecular weight PCs. The structure and properties of PC treated with ultrasonic wave such as torque changes and crystallinities were studied. The experimental results showed that ultrasonic wave could improve the crystallinities of PCs and sonication time was proportional to their crystallinity. This is attributed to the decrease of the specific volume and the resulting shrinkage is compensated by a flux of a polymer melt toward the crystallization front. Torque data were collected directly from the Haake internal mixer and crystallinities were evaluated from differential scanning calorimeter (DSC). This process is an environmentally benign process so that no additional solvents or treatments are needed and will be very useful in the conventional solid‐state process which is used industrially. Copyright © 2007 John Wiley & Sons, Ltd.     

弱耦合条件下g玻色子效应的重整化

基于Druce等人的方法,提出了一种新的g玻色子效应重整化微扰论方法.对使用此两种方法的前提条件一弱耦合条件,作了考察,并给出了满足前提条件下,两种方法的g玻色子效应的重整化计算结果.对比分析表明,提出的方法克服了Druce等人方法的局限性,对g玻色子效应的考虑更充分.     

Fully crosslinked poly(styrene‐co‐divinylbenzene) microspheres by precipitation polymerization and their superior thermal properties

Fully crosslinked, stable poly(styrene‐co‐divinylbenzene) microspheres, which are composed of various concentrations of divilylbenzene from 5 to 75 mol % based on styrene monomer, were prepared without a significant particle coagulation by the precipitation polymerization. The number‐average particle diameter ranged from 3.5 to 2.8 μm and decreased with an increasing concentration of divinylbenzene in monomer. In addition, the coefficient of variation of the microspheres was slightly reduced with the increasing concentration of divinylbenzene. The circularity and the measured specific surface area indicated that lesser particles are coagulated because of the improved stability of individual particles at a high divinylbenzene concentration and that the resulting particles have a smooth surface without micropores. The glass‐transition temperature was not observed for all microspheres formed from the range of divinylbenzene concentrations. In addition, the onset of the thermal‐degradation temperature was increased from 339.8 to 376.9 °C upon higher contents of divinylbenzene. On the basis of the DSC and thermogravimetric data, the polymer microspheres prepared by the precipitation polymerization possessed a fully crosslinked structure and highly enhanced thermal stability. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 835–845, 2004     

Crystal structure of (1,10-phenanthroline-N,N')(1,4,7,10-tetraazacyclododecane-N,N',N",N"')nickel(II) diperchlorate.

The crystal structure of the title compound, [Ni(C8H20N4)(C12H8N2)](ClO4)2, has been determined by X-ray diffraction. The Ni(II) ion is six coordinated with four nitrogen atoms of the tetradentate macrocyclic ligand and two nitrogen atoms of the bidentate ligand in a distorted octahedron geometry. The folded tetradentate macrocyclic ligand adopts a configuration having four five-membered chelate rings in distorted eclipsed conformations. The four hydrogen atoms of the amine groups of the macrocyclic ligand are on the same side towards the bidentate ligand.     

化学氧碘激光器光腔中碘分子浓度的测量

依据Ｂｅｅｒ定律，采用双光路法，利用Ａｒ￣＋激光器的４８８ｎｍ线作为探测激光，对化学氧碘激光器光腔中的碘分子浓度进行了瞬时测量，详细地研究了化学氧碘激光器重要部件之一，激活介质的给体－腆池的工作性能对其他工作参数的依赖关系，并估计了ｋｗ级化学氧碘激光器的最佳氧碘配比约为９０：１．     

在单一和连续等离子体放电条件下KSTAR PF线圈的运行特性分析

我们使用分析程序SAITOKSCPF研究了KSTAR PF 超导线圈的运行特性.为了控制KSTAR超导托卡马克的运行等离子的外形以便实现受控热核聚变反应,在超导PF线圈内通过高变化率的运行电流.由于电磁感应,在超导线圈、支持结构和低温容器内产生感应电流和损耗.超临界氦流过CICC导体内部保持超导体运行在4.2K的温度.分析表明最大的温度在PF1线圈内部.在这篇论文中,我们对于单一和连续条件下等离子体放电对超导体运行的影响进行了研究.     

Synthesis and characterization of novel aromatic poly(imide–benzoxazole) copolymers

New poly(imide–benzoxazole) copolymers were prepared directly from a dianhydride, a diacid chloride, and a bis(o‐diaminophenol) monomer in a two‐step method. In the first step, poly(amic acid–hydroxyamide) precursors were synthesized by low‐temperature solution polymerization in an organic solvent. Subsequently, the thermal cyclodehydration of the poly(amic acid–hydroxyamide) precursors at 350 °C produced the corresponding poly(imide–benzoxazole) copolymers. The inherent viscosities of the precursor polymers were around 0.19–0.33 dL/g. The cyclized poly(imide–benzoxazole) copolymers had glass‐transition temperatures in the range of 331–377 °C. The 5% weight loss temperatures ranged from 524 to 535 °C in nitrogen and from 500 to 514 °C in air. The poly(imide–benzoxazole) copolymers were amorphous, as evidenced by the wide‐angle X‐ray diffraction measurements. The structures of the precursor copolymers and the fully cyclized copolymers were characterized by Fourier transform infrared, ¹H NMR, and elemental analysis. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6020–6027, 2005     

Sphere-and-point incidence relations in high dimensions with applications to unit distances and furthest-neighbor pairs

Forn points in three-dimensional Euclidean space, the number of unit distances is shown to be no more thancn ^8/5. Also, we prove that the number of furthest-neighbor pairs forn points in 3-space is no more thancn ^8/5, provided no three points are collinear. Both these results follow from the following incidence relation of spheres and points in 3-space. Namely, the number of incidences betweenn points andt spheres is at mostcn ^4/5 t ^4/5 if no three points are collinear andn ^3/2>t>n ^1/4. The proof is based on a point-and-line incidence relation established by Szemerédi and Trotter. Analogous versions for higher dimensions are also given.     

Mobility of electrons and holes in an n-type organic semiconductor perylene diimide thin film

N,N′-diphenylbutyl-3,4,9,10-perylenebiscarboximide (PTCDI-C4Ph) were characterized by optical and electrochemical methods. A device with an ITO/PTCDI-C4Ph (≈2 μm)/Al structure was fabricated to measure mobility by time-of-flight techniques. This vacuum deposited organic layer was an amorphous state. Electrons were observed faster than holes. The electron and hole mobilities were 1.8 × 10⁻⁴ cm²/V s and 1.1 × 10⁻⁴ cm²/V s under the electric field of 500 (V/cm)^1/2, respectively. This result shows that this organic compound is a good candidate for an n-type conduction.