Massenspektrometrische Untersuchung von Amiden: III—Intramolekulare Nucleophile Substitution bei der Methyl-Abspaltung aus Crotonsaurepiperidid und Vinylogen Derivaten

The methyl cleavage from piperidides of type CH₃(CH?CH)_nCONC₅H₁₀ with n = 1 to 3 does not proceed via ring contraction as shown earlier with n = 0. The fragmentation can be formulated with the concept of neighbouring group participation of the amide function which leads to a cyclic transition state. Investigations with a ²H-labelled compound in the case of n = 1 as well as energy measurements (AP, IP, E_k) agree with this assumption.     

Novel enantioselective strong cation exchangers based on sulfodipeptide selectors: evaluation for enantiomer separation of chiral bases by nonaqueous capillary electrochromatography

Strong cation exchange (SCX)-type chiral stationary phases (CSPs) based on beta-amino sulfonic acid-terminated dipeptide derivatives as chiral selectors, immobilized on thiol-modified silica particles (3.5 microm), were synthesized and applied to enantiomer separations of chiral bases by nonaqueous capillary electrochromatography (CEC). The effect of structural variations of the sulfodipeptide selectors on the separation factors alpha was investigated. These studies included variation of the acid-terminal amino sulfonic acid residue, variation of the configurations, i.e., comparison of the diastereomeric (S,S)- and (R,S)-configurations of the sulfodipeptides, and finally comparison of sulfodipeptide selectors with corresponding beta-amino sulfonic acid analogs. In general, the capillary columns (100 microm ID) packed with the new SCX-type CSPs showed enantioselectivity for an elaborated set of chiral basic drugs in CEC acting by an enantioselective cation-exchange retention mechanism. N-[N-(4-Allyloxy-3,5-dichlorobenzoyl)-leucyl]-2-amino-3,3-dimethylbutane sulfonic acid, in particular with (R,S)-configuration, turned out to be a more effective SCX-type selector than a more rigid analog based on N-[N-(4-Allyloxy-3,5-dichlorobenzoyl)-leucyl]-2-pyrrolidinemethane sulfonic acid. Both of the former diastereomers were capable to baseline-resolve the enantiomers of ca. 40% of the tested basic chiral solutes including sympathomimetics and beta-blockers, while for the latter SCX-type CSPs only 10-20% of the selected solutes afforded resolutions > 1.5.     

Determination of radiative lifetimes in neutral nitrogen using short laser pulses from a distributed feedback dye laser

Radiative lifetimes were determined for two short-lived states in neutral nitrogen. Following photo-dissociation and two-photon excitation employing the same UV source, excitation to higher states was performed with a distributed feedback dye laser (DFDL). The lifetimes were found to be τ(2p ²4d ⁴ D _7/2)=17(3) ns and τ(2p ²5s ⁴ P _5/2)=22(3) ns.     

Studies on the Stereochemistry of 2-(Nitromethylidene)-Heterocycles

The ¹H-NMR spectra of 2-(nitromethylidene)pyrrolidine ( 7 ), 1-methyl-2-(nitromethylidene)imidazolidind ( 10 ) and 3-(nitromethylidene)tetrahydrothiazine ( 11 ) in CDCl₃ and (CD₃)₂SO indicate that these compounds have the intramolecularly H-bonded structures (Z)- 7 , (E)- 10 and (Z)- 11 while the N-methyl derivative 8 of 7 is (E)-configurated in both solvents. 1-Benzylamino-1-(methyltio)-2-nitroehtylene ( 13 ), an acylic model, has the H-bonded configuration (E)- 13 in CDCl₃ and in (CD₃)₂SO. 2-(Nitromethylidene)thiazolidine ( 3 ) has the (E)-configuration in CDCl₃ but exists in (CD₃)₂SO as a mixture of (Z)- and (E)-isomers with the former predominating. Both species are detected to varying proportions in a mixture of the two solvents. ¹⁵N-NMR spectroscopy of 3 ruled out unambiguously the nitronic acid structure 6 and the nitromethyleimine structure 5 . The N-methyl derivative 4 of 3 is (Z)-configurated in (CD₃)₂SO. Comparison of the olefinic proton shifts of (Z)- 3 and (Z)- 4 with those of analogues and also of 1,1-bis(methylti)-2-nitroethylene ( 12 ) shows decreased conjugation of the lone pair of electrons of the ring N-atom in (Z)- 3 and (Z)- 4 . This is also supported by ¹³C-NMR studies. Plausible explanations for the phenomenon are offered by postulating that the ring N-atoms are pyramidal in (Z)- 3 and (Z)- 4 and planar in other cases or, alternatively, that the conjugated nitroenamine system gets twisted due to steric interaction between the NO₂-group and the ring S-atom. Single-crystal X-ray studies of 3 and 8 show that the former exists in the (Z)-configuration and the latter in (E)-configuration; the ring N-atom in the former has slightly more pyramidal character than in the latter.     

Beitrag zur direkten Sauerstoffbestimmung in organischen Verbindungen

Zusammenfassung Es wird über zehnjährige Erfahrungen mit der maßanalytischen Mikrobestimmung des Sauerstoffes nachUnterzaucher berichtet. Silikon-schlauchverbindungen dürfen nicht verwendet werden, da sie gasdurchlässig sind. Die Gesamtanalysenzeit kann durch Verwendung eines Klappbrenners auf 15 Minuten verkürzt werden. Die Möglichkeit, das vonEmich im Prinzip vorgeschlagene CO₂-Multiplikationsverfahren anzuwenden, wurde überprüft. Zur Endbestimmung wird für Routine-analysen dem jodometrischen Verfahren wegen seiner Schnelligkeit und Empfindlichkeit der Vorzug gegeben.

---

Summary A report is given of 10 years of experiences with the volumetric micro determination of oxygen by theUnterzaucher procedure. Silicone tube connections must not be used since they are permeable to gases. The total analysis time can be shortened to 15 minutes by using a shutter burner. A study was made of the possibility of using the multiplication procedure that in principle was recommended byEmich. For routine analyses, it was found preferable to employ the iodometric method for the final measurement because of its rapidity and sensitivity.

---

Résumé On donne un compte rendu sur des expériences effectuées depuis une dizaine d'années sur le microdosage volumétrique de l'oxygène d'aprèsUnterzaucher. Il ne faut pas employer pour ces expériences de tubes siliconés car ils sont perméables aux gaz. La durée totale d'une analyse peut être ramenée à 15 minutes en employant un brûleur à charnière. On a examiné la possibilité d'appliquer le procédé de multiplication de CO₂ préconisé dans le principe parEmich. Pour la détermination du point équivalent dans les analyses en série, on donne la préférence au procédé iodométrique en raison de sa rapidité et de sa sensibilité.

     

Synthese von selektiv N- funktionalisierten Polyamin-Derivaten

Synthesis of Selectively N-Functionalized Polyamine Derivatives A threefold differently protected derivative 8 of the triamine spermidine ( 2 ) has been prepared in three steps starting from propane-1,3-diamine ( 1 ). The protected spermidine derivative 8 was converted to its spermine analogue 12 , a useful polyamine intermediate. In a convergent way, the fourfold differently protected derivative 18 of the tetraamine spermine ( 3 ) has been obtained by coupling the two different and separately prepared propane-1,3-diamine units 15 and 17 . Spermidine derivative 19 and spermine derivative 20 , both selectively protected at both primary amino groups, have been Prepared from the free polyamines 2 and 3 , respectively, in a direct approach.     

Directed assembly of Au nanoparticles onto planar surfaces via multiple hydrogen bonds

We have developed a new concept to effect nanoparticle binding on surfaces by use of directed, specific molecular interactions. Hamilton-type receptors displaying a binding strength of approximately 10(5) M(-)(1) were covalently fixed onto self-assembled monolayers via Sharpless-type "click" reactions, thus representing an efficient method to control the densities of ligands over a range from low to complete surface coverage. Au nanoparticles covered with the matching barbituric acid receptors bound with high selectivity onto this surface by a self-assembly process mediated by multiple hydrogen bonds. The binding process was investigated with atomic force microscopy. Moderate control of particle density was achieved by controlling the receptor density on the self-assembled monolayer surface. The method opens a general approach to nanoparticle and small object binding onto patterned surfaces.     

Thermal decomposition of cobalt nitrato compounds: Preparation of anhydrous cobalt(II)nitrate and its characterisation by Infrared and Raman spectra

The thermal decomposition of Co(NO₃)₂·6H₂O (1) as well as that one of NO[Co(NO₃)₃] (Co(NO₃)₂·N₂O₄) (2) was followed by thermogravimetric (TG) measurements, X-ray recording and Raman and IR spectra. The stepwise decomposition reactions of 1 and 2 leading to anhydrous cobalt(II)nitrate (3) were established. In N₂ atmosphere, cobalt oxides are finally formed whereas in H₂/N₂ (10% H₂) cobalt metal is produced. Rapid heating of cobalt(II)nitrate hexahydrate causes melting (formation of a hydrate melt) and therefore side reactions in the hydrate melt by incoupled reactions and evolution/evaporation of different species as, e.g., HNO₃, NO₂, etc. In case of larger amounts in dense packing in the sample container, the formation of oxo(hydoxo)nitrates is possible at higher temperature. For 2, its thermal decomposition to 3 was followed and its decomposition mechanism is proposed.     

Structural analysis of underivatized sialic acids by combined high-performance liquid chromatography-mass spectrometry

Mass spectra of chemically ionized, positive ions of underivatized N,O-acylated sialic acids, 2-deoxy-2,3-didehydro-N-acetylneuraminic acid and sialyl-alpha(2-3)-lactose were obtained by combined high-performance liquid chromatography--mass spectrometry, using a direct liquid inlet system. The mass spectra of the different compounds for which fragmentation schemes are proposed enable the differentiation between sialic acids, although the localization of O-substituents is not possible. However, since the various sialic acids separated well on high-performance liquid chromatography, combined high-performance liquid chromatography-mass spectrometry allowed their unequivocal characterization.     

N‐Silylaminotitanium Chlorides — Synthesis,Structures, Multinuclear Magnetic Resonance,and some Applications

N‐Silylaminotitanium trichlorides, Me₃S(R)N‐TiCl₃ ( 18 ) [R = ^tBu ( a ), SiMe₃ ( b ), 9‐borabicyclo[3.3.1]nonyl (9‐BBN)( c )], and (CH₂SiMe₂)₂N‐TiCl₃ ( 18d ) were obtained in high yield and high purity from the reaction of the respective bis(silylamino)plumbylene with an excess of titanium tetrachloride. The crystal structure of 18a was determined by X‐ray analysis. The reactions of the analogous stannylenes with an excess of TiCl₄ did not lead to 18 . N‐Lithio‐trimethylsilyl[9‐(9‐borabicyclo[3.3.1]nonyl)]amine ( 8 ) was prepared, structurally characterized and used for the synthesis of a new bis(amino)stannylene 10 and a plumbylene 11 . The compounds 18a—d served as ideal starting materials for the synthesis of bis(silylamino)titanium dichlorides, where the silylamino groups can be identical ( 19 ) or different ( 20 ). This was achieved either by the reaction of 18 again with bis(amino)plumbylenes or with lithium N‐silylamides. In contrast to the direct synthesis starting from titanium tetrachloride and two equivalents of the respective lithium amide, which in general affords 19 with identical amino groups only in low yield, the procedure starting from 18 is much more versatile and gave the pure compounds 19 or 20 in almost quantitative yield. Further treatment of the dichlorides 19 or 20 with lithium amides led to tris(amino)titanium chlorides 21 . The dichlorides 19 or 20 reacted with two equivalents of alkynyllithium reagents to give the first well characterized examples of di(alkyn‐1‐yl)bis(N‐silylamino)titanium compounds 22 — 27 . These compounds reacted with trialkylboranes (triethyl or tripropylborane) by 1, 1‐organoboration. In some cases, the extremely reactive reaction products could be identified as novel 1, 1‐bis(silylamino)titana‐2, 4‐cyclopentadienes 28 — 31 bearing a dialkylboryl group in 3‐position. In solution, the proposed structures of all products were deduced from a consistent set of data derived from multinuclear magnetic resonance spectroscopy (¹H, ¹¹B, ¹³C, ¹⁴N, ¹⁵N, ²⁹Si, ³⁵Cl NMR).