Ozone production in oxygen by means of F2-laser irradiation at λ=157.6 nm

Ozone is generated in pure oxygen (p5 kPa), synthetic air (p7 kPa) and oxygen-argon mixtures (p3 kPa) by irradiation of these gases with the VUV light of a repetitively pulsed (f _L15 Hz) F₂-laser at =157.6 nm with maximum about 4 mJ/pulse. An absorption photometer measurement operating at 253.7 nm (Hg line) determines the ozone concentration as a function of oxygen and/or additive gas pressure, the repetition frequency of the laser and the wall temperature of the reaction chamber. The temporal development of the ozone concentration as a function of these parameters is calculated by means of rate equations for the species O(³ P), O₂(X ³ _g ^– ), O₃(¹ A ₁), O(¹ D), O₂(a ¹_g), O₂(b ¹ _g ⁺ ) and vibrationally excited O ₃ ^* (¹ A ₁) and the photon distribution. The maximum concentration of O₃ in the sealed-off chamber reaches 1.6% in pure O₂, 4.1% in air and 1.2% in a 1:5 O₂-Ar mixture at 3 kPa. The annihilation of O₃ by the wall and temperature dependent volume processes (300 KT395 K) is studied and the experimental and theoretical results are compared.     

Transport as a consequence of state-dependent diffusion

Overdamped particles subject to a drift in a force field with sinusoidal space dependence and also a sinusoidally modulated space-dependent diffusion, with the same period as the drift, experience a net driving force. The resulting current depends on the amplitude of the modulation of the diffusion and is a periodic function of the phase difference between the sinusoidal drift and the sinusoidal modulation of the diffusion. For small modulation amplitudes a particle subject to state-dependent noise behaves the same way as a particle subject to thermal noise but with a drift which, in addition to the sinusoidal term, contains a net force term [M. Büttiker,Z. Phys. B 68:161 (1987)]. A specific example of this behavior [N. G. van Kampen,IBM J. Res. Dev. 32:107 (1988); R. Landauer,J. Stat. Phys. 53:233 (1988).] is the motion of overdamped particles in a ring subject to a nonuniform temperature field. When the drift and the temperature, which are periodic with a period equal to the ring circumference, are not in phase a noise-induced circulating current results.This paper will appear in a forthcoming issue of theJournal of Statistical Physics.     

Compact,wide aperture X-ray preionized XeCl laser with high specific optical power

An X-ray preionized, discharge-pumped XeCl laser with a variable beam cross-section of up to 6×6 cm² is described. It uses flat electrodes and the beam width is determined by X-ray collimation. Its operation characteristics concerning reduced electric field strength (E/p) and X-ray dose are discussed in detail. The inductance of the discharge loop is minimized using a water capacitor arrangement. A very high specific optical power (90 MW/l) is achieved in an active volume of 1.2 l. The pulse energy exceeds 5 J in a 45 ns pulse (FWHM). Komatsu Ltd., Manda 1200, Hiratsuka-shi, Kanagawa 254, Japan Institute of Optics and Fine Mechanics, Department of Plasma Physics, Academia Sinica, Shanghai, P.R. China     

Particle ratios from a chiral SU(3) model

The measured particle ratios in central heavy-ion collisions are investigated within a chemical and thermal equilibrium chiral SU(3) σ?ω approach. Contrary to the commonly adopted non-interacting gas calculations, the chiral SU(3) model predicts modified effective hadron masses and effective chemical potentials in the medium and a transition to a chirally restored phase at high temperatures or chemical potentials. the influence of three different types of phase transitions is investigated. We show that the deduced freeze-out values considerably depend on the underlying model while the quality of the fit is approximately the same.     

Correction of spin diffusion during iterative automated NOE assignment

Indirect magnetization transfer increases the observed nuclear Overhauser enhancement (NOE) between two protons in many cases, leading to an underestimation of target distances. Wider distance bounds are necessary to account for this error. However, this leads to a loss of information and may reduce the quality of the structures generated from the inter-proton distances. Although several methods for spin diffusion correction have been published, they are often not employed to derive distance restraints. This prompted us to write a user-friendly and CPU-efficient method to correct for spin diffusion that is fully integrated in our program ambiguous restraints for iterative assignment (ARIA). ARIA thus allows automated iterative NOE assignment and structure calculation with spin diffusion corrected distances. The method relies on numerical integration of the coupled differential equations which govern relaxation by matrix squaring and sparse matrix techniques. We derive a correction factor for the distance restraints from calculated NOE volumes and inter-proton distances. To evaluate the impact of our spin diffusion correction, we tested the new calibration process extensively with data from the Pleckstrin homology (PH) domain of Mus musculus beta-spectrin. By comparing structures refined with and without spin diffusion correction, we show that spin diffusion corrected distance restraints give rise to structures of higher quality (notably fewer NOE violations and a more regular Ramachandran map). Furthermore, spin diffusion correction permits the use of tighter error bounds which improves the distinction between signal and noise in an automated NOE assignment scheme.     

Mechanisms determining the salience of coloration in echoed sound: influence of interaural time and level differences

This study investigates whether the salience of the pitch associated with a single reflection of a broadband sound, such as noise, is determined by the monaural information mediated by the stimuli at the two ears, or by the relative locations of the primary sound and the reflection. Pitch strength was measured as a function of the reflection delay and the lateral displacement between the primary sound and the reflection. Thereby, lateral displacement was produced by means of interaural time differences (ITDs) in experiment 1 and interaural level differences (ILDs) in experiment 3. The results from both experiments are in accordance with the assumption that the strength of the pitch associated with a reflection is based on a central average of the internal representations of the stimuli at the two ears. This notion was corroborated by experiment 2, which showed that the results from experiment 1 could be mimicked by simply adding the stimuli from the two ears and presenting the merged stimulus identically to both ears.     

Chirped-pulse oscillators: a route to high-power femtosecond pulses without external amplification

We demonstrate a Kerr-lens mode-locked Ti:sapphire oscillator that generates 130-nJ, 26-fs and 220-nJ, 30-fs pulses at a repetition rate of 11 MHz. The generation of stable broadband, high-energy pulses from an extended-cavity oscillator is achieved by the use of chirped multilayer mirrors to produce a small net positive dispersion over a broad spectral range. The resultant chirped picosecond pulses are compressed by a dispersive delay line that is external to the laser cavity. The demonstrated peak powers, in excess of 5 MW, are to our knowledge the highest ever achieved from a cw-pumped laser and are expected to be scalable to tens of megawatts by an increase in the pump power and (or) a decrease in the repetition rate. The demonstrated source permits micromachining of any materials under relaxed focusing conditions.     

Applications of fractional transforms to object reconstruction from in-line holograms

We propose a method for the digital reconstruction of an object whose diffraction pattern has been recorded on a hologram. The fractional Fourier transform is used for the object reconstruction. To determine the position of the object, the fractional order is scanned. The fractional cosine and fractional Hartley transforms are also employed for object reconstruction. These two transforms are real valued and allow the reconstruction to be done with lower computing complexity. Simulations and experimental results are presented.     

Brillouin light scattering from spin waves in magnetic layers and multilayers

We give an overview on our experimental and theoretical investigations of Brillouin light scattering in magnetic thin films, layered magnetic structures and superlattices. For epitaxial Fe(1 10) layers on W(1 10) the in-plane and out-of-plane magnetic surface anisotropy constants are determined, and the influence of Pd overlayers on the surface anisotropies is studied. For Fe/Pd superlattices a magnetic polarization of the Pd at the interfaces is established and the interface anisotropy constant is determined. For second order Fe/Pd superlattices, formed by alternating two Fe/Pd bilayers with different repeat periods, the Brillouin spectrum is obtained and compared to calculations. In the case of magnetic/nonmagnetic multilayered structures we investigate theoretically the crossing regime between dipolar and exchange-dominated modes. For small spacer-layer thicknesses, interlayer exchange coupling shifts the spin-wave frequencies of all but the highest-frequency dipolar mode into the exchange-mode regime. In case of all-magnetic multilayered structures, such as Fe/Ni multilayers, a new type of propagating collective excitations arising from coupled exchange modes is predicted.