New example of a non-heme mononuclear iron(IV) oxo complex. Spectroscopic data and oxidation activity

The green complex S=1 [(TPEN)FeO]2+ [TPEN=N,N,N',N'-tetrakis(2-pyridylmethyl)ethane-1,2-diamine] has been obtained by treating the [(TPEN)Fe]2+ precursor with meta-chloroperoxybenzoic acid (m-CPBA). This high-valent complex belongs to the emerging family of synthetic models of Fe(IV)=O intermediates invoked during the catalytic cycle of biological systems. This complex exhibits spectroscopic characteristics that are similar to those of other models reported recently with a similar amine/pyridine environment. Thanks to its relative stability, vibrational data in solution have been obtained by Fourier transform infrared. A comparison of the Fe=O and Fe=(18)O wavenumbers reveals that the Fe-oxo vibration is not a pure one. The ability of the green complex to oxidize small organic molecules has been studied. Mixtures of oxygenated products derived from two- or four-electron oxidations are obtained. The reactivity of this [FeO]2+ complex is then not straightforward, and different mechanisms may be involved.     

A 1,8-naphthalenediol-based unsymmetrical dinucleating ligand

A facile synthesis of 2-formyl-1,8-naphthalenediol is reported. Its potential as a general precursor for the preparation of unsymmetrical multidentate chelating ligand systems based on 1,8-naphthalenediol is demonstrated by the synthesis of the dinucleating ligand L(4-)(H(4)L=N,N'-bis(2-(1,8-naphthalenediol)methylidene)propylenediamine). Reaction of H(4) L with copper acetate results in the formation of the unsymmetrical dinuclear Cu(II) complex [LCu(2)](3), which has been structurally characterized by single-crystal X-ray diffraction. One Cu(II) ion is coordinated by a N(2)O(2) compartment of L(4-) and the other Cu(II) ion is coordinated by an O(4) compartment of L(4-) while they are bridged by two aryloxide functions of L(4-). A dimerization of two molecules of 3 to a tetranuclear entity 3(2) occurs through formation of weak apical Cu--O interactions. Analysis of the temperature dependent magnetic susceptibility measurements (2--290 K) established a strong intradimer exchange coupling J(12)=-371 cm(-1). This strong superexchange interaction fits nicely in a magneto-structural correlation which has been established for dinuclear bis(phenoxide)-bridged Cu(II) complexes demonstrating the electronic equivalence of the aryloxides of a phenol and 1,8-naphthalenediol.     

Application of Microwave Energy to Cleavage of Sulfur Bonds in the S8Ring in the Simplest Amide Solvents

Microwave energy has been employed for cleavage of sulfur bonds in the S₈ring. Cleavage of S–S bonds was carried out in extraction of elemental sulfur in simple amide solvents. Due to the use of microwave energy and the polarity of amides, up to, 100 times lower concentration of a nucleophilic reducer, such as azide or nitrite, may be used to cleave the sulfur bonds. The time needed for cleavage of sulfur bonds at sulfur concentration higher than 0.1 mg S/100 mg solvent was reduced from hours to minutes. This cleavage was quantitative when carried out in a Teflon container in a microwave oven with continuous or pulsed heating. UV spectra show from which value of absorption there will be a sulfur sol at different sulfur concentrations. This allows us to adjust the microwave exposure power and time to avoid sulfur sol formation and not destroy the sample.     

Determination of nitrite as pentafluorobenzyl derivative by RP-HPLC and UV detection with and without ion-pair extraction

Summary A reversed-phase high-performance liquid chromatographic (RP-HPLC) method with UV detection (270 nm) for the determination of nitrite as its pentafluorobenzyl derivative with and without ion-pair extraction is described. Ion-pair extraction of nitrite from aqueous solutions was performed by using a 1 mol/l solution of the liquid ion exchanger methyltrioctylammonium chloride in toluene. The residue of the ion-pair extraction or an aliquot of an aqueous nitrite solution or of a biological fluid (100 l) were treated with 400 l of acetone and 10 l of pentafluorobenzyl bromide. Nitrite was converted into its pentafluorobenzyl derivative by heating at 50°C for 90 min. After evaporation of acetone the aqueous phases were diluted with 100 to 400 l of methanol, and up to 100 l were injected into the RP-HPLC system. The method allows accurate analysis of nitrite in the presence of nitrate directly in aqueous solutions and biological fluids in concentrations down to 2.0 mg/l. The method is also applicable to the determination of nitrate following its reduction to nitrite by cadmium.     

Formation of Zn(1-x)MnxS nanowires within mesoporous silica of different pore sizes

Arrays of highly ordered Zn(1-x)MnxS quantum wires with x ranging from 0.01 to 0.3 and with lateral dimensions of 3, 6, and 9 nm were synthesized within mesoporous SiO2 host structures of the MCM-41 and SBA-15 type. The hexagonal symmetry of these arrays (space group p6m) and the high degree of order was confirmed by X-ray diffraction and transmission electron microscopy (TEM) studies. Physisorption measurements show the progressive filling of the pores of the SiO2 host structures, while TEM and Raman studies reveal the wire-like character of the incorporated Zn(1-x)MnxS nanostructures. X-ray absorption near-edge structure, extended X-ray absorption fine structure, photoluminescence excitation (PLE), and electron paramagnetic resonance studies confirm the good crystalline quality of the incorporated Zn(1-x)MnxS guest species and, in particular, that the Mn2+ ions are randomly distributed and are situated on tetrahedrally coordinated cation sites of the Zn(1-x)MnxS wires for all x up to 0.3. The amount of Mn2+ ions loosely bound to the surface of the Zn(1-x)MnxS nanowires is less than 4% of the total Mn content even for the 3 nm nanostructures up to the highest Mn content of x = 0.3. The effects of the reduction of the lateral dimensions on electronic properties of the diluted magnetic semiconductor were studied by PLE spectroscopy. Due to the quantum confinement of the excitons in the wires an increase of the direct band gap with decreasing particle size is observed.     

Preparation of highly selective stationary phases for high-performance liquid chromatographic separation of enantiomers by direct copolymerization of monomers with single or twin chiral ligands

Uniformly sized macroporous polymer beads, which can be used as chiral stationary phase (CSP), have been prepared by the staged templated suspension polymerization process using chiral monomer as one of the copolymerization components. This approach enables the preparation of CSPs for which properties such as pore size, pore volume, surface area, chemistry, and chiral ligands can be tuned over a broad range. Several types of well-defined chiral monomers were prepared and allowed to assess synergistic effect of multiple selectors attached to a branched linker as well as the effect of the length and chemistry of the linker. Microscale batch screening was used for simple and rapid evaluation of selectivity. The most promising candidate CSPs were prepared on a larger scale and packed into HPLC columns. Their performance was demonstrated on the separation of racemic N-(3,5-dinitrobenzoyl)-alpha-amino acid alkylamides. The highest separation factors alpha of up to 27 were observed for CSPs prepared from monomers containing the branched spacer. These highly selective CSPs also enabled the separation of larger amounts of the target racemates upon column overload conditions.     

Encapsulation of functional moieties within branched star polymers: effect of chain length and solvent on site isolation

Porphyrin and pyrene photoactive cores have been encapsulated within an isolating polymeric shell using an efficient and general strategy based on the use of dendritic initiators for the ring-opening polymerization of epsilon-caprolactone to yield functional core star polymers. The isolation of the core functionalities has been studied using fluorescence quenching and fluorescence resonance energy transfer (FRET) techniques as well as solvatochromic probes. With increasing chain length as well as solvent polarity, enhanced site isolation of the core has been observed. These findings have been correlated to actual molecular dimensions independently measured by pulsed field gradient spin-echo (PGSE) NMR. The developed synthetic methodology offers a rapid route to efficient encapsulation of functional moieties and therefore has potential for the design of new materials.     

Synthesis of enantiomerically enriched allenes by (-)-sparteine-mediated lithiation of alkynyl carbamates

[reaction: see text]. The alpha-deprotonation of alkynyl carbamates 3 with the chiral base (-)-sparteine (4)/n-butyllithium, transmetalation with ClTi(O(i)()Pr)3, and subsequent substitution with an aldehyde results in the formation of enantioenriched 4-hydroxyallenyl carbamates 11. Stereoselection is determined by dynamic resolution of the lithium/(-)-sparteine complexes by selective crystallization.     

New insights into the reaction of zinc alkyls with dioxygen

Studies on the reaction of zinc alkyls with O2 are reported which demonstrate that the selective oxygenation of organozinc compound is viable. The reaction of [EtZn(azol)]n (azol = deprotonated 1-aziridineethanol) with an excess of dry O2 in toluene affords the zinc ethylperoxide [EtOOZn(azol)]2[EtZn(azol)]2, while the analogous reaction between Me2Zn and O2 results in the isolation of the Me6Zn7(OMe)8 cluster in high yield.