Application of sampled-d.c. anodic stripping voltammetry to metal/fulvic acid equilibria

The use of anodic stripping voltammetry (ASV) to determine the labile metal fraction in metal/ fulvic acid equilibrium systems is discussed. A method is described for distinguishing between the contributions of processes in the reduction and oxidation steps to the observed anodic (stripping) current. This method, which facilitates separate examination of the two processes, is based on timed addition of fulvic acids during the deposition step, on pH control, and on measurement of sampled-d.c. ASV peak areas (Faradaic charge) for metal/fulvic acid solutions. Results are presented for copper(Il) and lead(Il) complexes with six colloid-free soil-derived fulvic acids. In contrast to differential-pulse ASV, the stripping current measured by sampled-d.c. ASV showed no measurable contribution from ligand adsorption on the mercury drop. For heterogeneous ligand systems, such as fulvic acid, use of stripping peak heights over-estimates the fraction of non-labile metal complex because peak broadening results from the range of complexes formed in the anodic step.     

Contribution à la phytochimie du genre Gentiana. XXVI.. Identification d'une nouvelle di-O-glucosyl cinnamoyl-C-glucosylflavone extraite des feuilles de Gentiana X marcailhouana RY.

Phytochemistry of Genus Gentiana. XXVI. Identification of a New Di-O-glucosyl Cinnamoyl-C-glucosylflavone in the Leaves of Gentiana X marcailhouana RY . A new di-O-glucosyl cinnamoyl-C-glucosylflavone has been identified as 4′-O-β-D -glucosyl-2″-O-[2-O-β-D -glucosyl-2,4,5-trihydroxy-(E)-cinnamoyl]isoorientin ( 1 ).     

Derivatives and reactions of glutacondialdehyde V : The crystal and molecular structure of 5-hydroxy-trans-2, trans-4-pentadienal acetate. The charge distribution in the glutacondialdehyde anion

The structure of 5-hydroxy-trans-2, trans-4-pentadienal acetate has been determined, using three-dimensional diffractometercollected X-ray data. The compound has the all-trans configuration with the atoms C-1 to C-5 in a plane. The charge distribution in the acetate and in the glutacondialdehyde anion have been calculated using the CNDO/2 approximation. In both compounds higher negative charges were found on carbon atoms C-2 and C-4 than on C-1, C-3 and C-5.     

Development of a quality control method for the characterization of oligonucleotides by capillary zone electrophoresis-electrospray ionization-quadrupole time of flight-mass spectrometry

A capillary zone electrophoresis-negative electrospray ionization-quadrupole time of flight-mass spectrometric method was developed for the characterization of oligonucleotides after synthesis, using model compounds. The major difficulty is the adduction of metal cations to the polyanionic backbone of the oligonucleotide sample, resulting in complex spectra and decreased sensitivity. Several approaches were investigated to circumvent this problem. Separation was performed in an ammonium carbonate buffer. During separation, the interfering metal ions were exchanged for ammonium ions, which are less tightly bound to the oligonucleotide when ionized. The influence of the addition of piperidine and imidazole or trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid (CDTA) to the running buffer for further reduction of cation adduction was investigated. Addition of CDTA to the buffer system resulted in a deconvoluted spectrum with very little adducts. On-line sample stacking proved vital to preconcentrate the samples. The pH and the concentration of the ammonium carbonate buffer as well as the electrophoresis voltage were optimized to achieve the best signal response for the oligonucleotides and a maximum reduction of the cation adducts as well as a short analysis time. Finally, the sheath liquid composition was examined for further improvement of the signal. The developed method was used to analyze different oligonucleotides (5000-9200 Da) in light of its use as a final quality control method for oligonucleotides in terms of purity and sequence homogeneity of the synthesized products. In all cases, very little adducts were observed in the deconvoluted spectra, and the relative errors of the measured molecular masses ranged from 3 to 35 ppm.     

Time-resolved fluorescence analysis of the mobile flavin cofactor in p -hydroxybenzoate hydroxylase

Conformational heterogeneity of the FAD cofactor in p-hydroxybenzoate hydroxylase (PHBH) was investigated with time-resolved polarized flavin fluorescence. For binary enzyme/substrate (analogue) complexes of wild-type PHBH and Tyr222 mutants, crystallographic studies have revealed two distinct flavin conformations; the ‘in’ conformation with the isoalloxazine ring located in the active site, and the ‘out’ conformation with the isoalloxazine ring disposed towards the protein surface. Fluorescence-lifetime analysis of these complexes revealed similar lifetime distributions for the ‘in’ and ‘out’ conformations. The reason for this is twofold. First, the active site of PHBH contains various potential fluorescence-quenching sites close to the flavin. Fluorescence analysis of uncomplexed PHBH Y222V and Y222A showed that Tyr222 is responsible for picosecond fluorescence quenching free enzyme. In addition, other potential quenching sites, including a tryptophan and two tyrosines involved in substrate binding, are located nearby. Since the shortest distance between these quenching sites and the isoalloxazine ring differs only little on average, these aromatic residues are likely to contribute to fluorescence quenching. Second, the effect of flavin conformation on the fluorescence lifetime distribution is blurred by binding of the aromatic substrates: saturation with aromatic substrates induces highly efficient fluorescence quenching. The flavin conformation is therefore only reflected in the small relative contributions of the longer lifetimes.     

Synthesis of meso-tetra-(3,5-dibromo-4-hydroxylphenyl)-porphyrin and its application to second-derivative spectrophotometric determination of lead in clinical samples

A new very sensitive and selective chromogenic reagent, meso-tetra-(3,5-dibromo-4-hydroxylphenyl)porphyrin [T(DBHP)P], was synthesized and studied for the determination of trace lead in detail. In 0.10 mol l-1 NaOH medium, lead reacts with T(DBHP)P to form a 1:2 yellow complex, which gives a maximum absorption at 479 nm; 0-0.48 microgram ml-1 Pb(II) obeyed Beer's law. The molar absorptivity of the complex and Sandell's sensitivity are 2.5 x 10(5) 1 mol-1 cm-1 and 0.000812 microgram cm-2, respectively. Second-derivative spectrophotometry is better than conventional spectrophotometry in sensitivity and selectivity, and its limit of quantification, limit of detection and relative standard deviation are 0.70 ng ml-1, 0.21 ng ml-1 and 1.0%, respectively. Ca (3250-fold), Mg (2000-fold), Sr (1000-fold), Ba (750-fold), Al (1000-fold), Bi (500-fold), Fe (2000-fold), Co (750-fold), Ni (1000-fold), Cu (750-fold), Zn (1250-fold), Cd (2500-fold) and Ag (550-fold) do not interfere with the determination of lead. The chromogenic system is remarkably superior to other reagents, especially porphyrin compounds. The influence caused by oxygen in air or in solution can be easily eliminated by adding Na2SO3. The reaction is very stable, the stability constant of the complex being 1.2 x 10(45). The chromogenic reaction is completed within 1 min at room temperature when 8-hydroxylquinoline is used as catalyst. The proposed method has been applied to the direct determination of trace lead in clinical samples. The accuracy and precision are both very satisfactory.     

Linear-quadratic stochastic pursuit-evasion games

A linear-quadratic differential game in which the system state is affected by disturbance and both players have access to different measurements is solved. The problem is first converted to an optimization problem in infinite-dimensional state space and then solved using standard techniques. For convenience, L ₂-white noise instead of Wiener process setup is used.     

Potential-energy surface, dynamics of van der Waals motions, and vibronic transitions in p-difluorobenzene-argon complex

The dynamics of van der Waals vibrational motions and vibronic spectrum of the complex of argon with p-difluorobenzene (ArDFB) are investigated using the ab initio method. The electronic ground-state potential-energy surface of the complex is calculated at the second-order M?ller-Plesset level of theory using a well-balanced basis set aug-cc-pVDZ and its reduced version without tight polarization functions. The dissociation energy of 351 cm(-1) and the binding energy of 402 cm(-1) determined at the Ar distance of 3.521 Angstroms from the DFB ring well agree with the experimental data available. The character of calculated vibrational levels is analyzed and the effect of a strong coupling between the stretching and bending motions is investigated. A new class of hybrid states created by this coupling is found. To investigate the vibronic S(1)-S(0) spectrum, the surfaces of the electronic transition dipole moment are calculated using the ab initio method. From these surfaces, the vibronic transition intensities are determined and employed to assign the Franck-Condon- and Herzberg-Teller-induced transitions.     

On the non-existence of a class of symmetric group divisible partial designs

Many non-existence theorems are known for symmetric group divisible partial designs. In the case that these partial designs are auto-dual with ₁=0, an ideal incidence structure can be defined whose elements are the equivalence-classes of non-collinear points and parallel blocks. Except for some trivial cases this incidence structure turns out to be a symmetric design, and by studying its existence we can prove much more powerful non-existence theorems.