A Simple Procedure for the Preparation of Chiral ‘Tris(hydroxymethyl)methane’ Derivatives

The aldol adducts 1a – 13a of R,R-2(tertbutyl)-6-methyl-1,3-dioxan-4-one (from 3-hydroxybutanoic acid) to aldehydes, single diastereoisomers obtained as described previously, are acetylated or benzoylated to the corresponding esters 1b – 5b and 6c – 13c , respectively, which in turn are reduced with LiAlH₄ to the title compounds 14 – 24 . The enantiomerically pure triols thus available may be useful as chiral building blocks, as auxiliaries for enantioselective reactions, and as center pieces for chiral dendrimers.     

Structural and Chemical Analysis of Materials with High Spatial Resolution

 An understanding of the correlation between microstructures and properties of materials require the characterization of the material on many different length scales. Often the properties depend primarily on the atomistics of defects, such as dislocations and interfaces. The different techniques of transmission electron microscopy allow the characterization of the structure and of the chemical composition of materials with high spatial resolution to the atomic level: high resolution transmission electron microscopy allows the determination of the position of the columns of atoms (ions) with high accuracy. The accuracy which can be achieved in these measurements depends not only on the instrumentation but also on the quality of the transmitted specimen and on the scattering power of the atoms (ions) present in the analyzed column. The chemical composition can be revealed from investigations by analytical microscopy which includes energy dispersive X-ray spectroscopy, mainly quantitatively applied for heavy elements, and electron energy-loss spectroscopy. Furthermore, the energy-loss near-edge structure of EELS data results in information on the local band structure of unoccupied states of the excited atoms and, therefore, on bonding. A quantitative evaluation of convergent beam electron diffraction results in information on the electron charge density distribution of the bulk (defect-free) material. The different techniques are described and applied to different problems in materials science. It will be shown that nearly atomic resolution can be achieved in high resolution electron microscopy and in analytical electron microscopy. Recent developments in electron microscopy instrumentation will result in atomic resolution in the foreseeable future.     

Development of a microfluidic confocal fluorescence detection system for the hyphenation of nano-LC to on-line biochemical assays

One way to profile complex mixtures for receptor affinity is to couple liquid chromatography (LC) on-line to biochemical detection (BCD). A drawback of this hyphenated screening approach is the relatively high consumption of sample, receptor protein and (fluorescently labeled) tracer ligand. Here, we worked toward minimization of sample and reagent consumption, by coupling nano-LC on-line to a light-emitting diode (LED) based capillary confocal fluorescence detection system capable of on-line BCD with low-flow rates. In this fluorescence detection system, a capillary with an extended light path (bubble cell) was used as a detection cell in order to enhance sensitivity. The technology was applied to a fluorescent enhancement bioassay for the acetylcholine binding protein, a structural analog of the extracellular ligand-binding domain of neuronal nicotinic acetylcholine receptors. In the miniaturized setup, the sensitive and low void volume LED-induced confocal fluorescence detection system operated in flow injection analysis mode allowing the measurement of IC₅₀ values, which were comparable with those measured by a conventional plate reader bioassay. The current setup uses 50 nL as injection volume with a carrier flow rate of 400 nL/min. Finally, coupling of the detection system to gradient reversed-phase nano-LC allowed analysis of mixtures in order to identify the bioactive compounds present by injecting 10 nL of each mixture.     

Development of a simplified method for the simultaneous determination of retinol, α-tocopherol,and β-carotene in serum by liquid chromatography–tandem mass spectrometry with atmospheric pressure chemical ionization

A new and simple method for the determination of fat-soluble vitamins (retinol, alpha-tocopherol, and beta-carotene) in human serum was developed and validated by using liquid chromatography-tandem mass spectrometry with atmospheric pressure chemical ionization (LC-APCI-MS-MS). Different solvent mixtures were tested to obtain deproteinization and extraction of the analytes from the matrix. As a result, a volume of 240 microL of a 1:1 (v/v) ethanol/ethyl acetate mixture added to 60 microL of serum was found to be suitable for both protein precipitation and antioxidants solubilization, giving the best recovery for all three analytes. Deproteinized samples (20 microL) were injected after dilution, without the need for concentration or evaporation to dryness and reconstruction of the sample. Vitamins were separated on a C-8 column using a 95:5 (v/v) methanol/dichloromethane mixture and ionized in the positive-ion mode; detection was performed in the selected-reaction monitoring mode. Linearity of the LC-APCI-MS-MS method was established over 5 orders of magnitude for retinol and alpha-tocopherol, whereas in the case of beta-carotene it was limited to 4 orders. Lower limits of quantitation were 1.7, 2.3, and 4.1 nM for retinol, alpha-tocopherol, and beta-carotene, respectively. Serum concentrations of retinol, alpha-tocopherol, and alpha+beta-carotene determined in a group of healthy volunteers were 2.48, 38.07, and 0.50 microM, respectively, in samples collected in winter ( n=122) and 2.69, 45.88, and 0.90 microM during summer ( n=66).     

Average local electrostatic potential and the core-valency separation in atoms

The average local electrostatic potential function, V(r)/ ρ(r), is calculated for 87 atoms, Li-Ac, in the ground state using the nonrelativistic average-over-configuration numerical Hartree-Fock density. It is found empirically that in a given atom the shell boundaries are expressed as the successively increasing maxima in V(r)/ ρ(r) and the outermost maximum presents good approximate estimates of the core-valence separation in atoms. The likeness in behavior of V(r)/ ρ(r) at each shell boundary with the maximum hardness principle is discussed. The single-exponent-fit parameters for the electron density in the valency region are provided for all atoms. © 1995 John Wiley & Sons, Inc.     

Influence of nanoparticle surface functionalization on the thermal stability of colloidal polystyrene films

The installation of large scale colloidal nanoparticle thin films is of great interest in sensor technology or data storage. Often, such devices are operated at elevated temperatures. In the present study, we investigate the effect of heat treatment on the structure of colloidal thin films of polystyrene (PS) nanoparticles in situ by using the combination of grazing incidence small-angle X-ray scattering (GISAXS) and optical ellipsometry. In addition, the samples are investigated with optical microscopy, atomic force microscopy (AFM), and field emission scanning electron microscopy (FESEM). To install large scale coatings on silicon wafers, spin-coating of colloidal pure PS nanoparticles and carboxylated PS nanoparticles is used. Our results indicate that thermal annealing in the vicinity of the glass transition temperature T(g) of pure PS leads to a rapid loss in the ordering of the nanoparticles in spin-coated films. For carboxylated particles, this loss of order is shifted to a higher temperature, which can be useful for applications at elevated temperatures. Our model assumes a softening of the boundaries between the individual colloidal spheres, leading to strong changes in the nanostructure morphology. While the nanostructure changes drastically, the macroscopic morphology remains unaffected by annealing near T(g).     

A printed nanolitre-scale bacterial sensor array

The last decade has witnessed a significant increase in interest in whole-cell biosensors for diverse applications, as well as a rapid and continuous expansion of array technologies. The combination of these two disciplines has yielded the notion of whole-cell array biosensors. We present a potential manifestation of this idea by describing the printing of a whole-cell bacterial bioreporters array. Exploiting natural bacterial tendency to adhere to positively charged abiotic surfaces, we describe immobilization and patterning of bacterial "spots" in the nanolitre volume range by a non-contact robotic printer. We show that the printed Escherichia coli-based sensor bacteria are immobilized on the surface, and retain their viability and biosensing activity for at least 2 months when kept at 4 °C. Immobilization efficiency was improved by manipulating the bacterial genetics (overproducing curli protein), the growth and the printing media (osmotic stress and osmoprotectants) and by a chemical modification of the inanimate surface (self-assembled layers of 3-aminopropyl-triethoxysilane). We suggest that the methodology presented herein may be applicable to the manufacturing of whole-cell sensor arrays for diverse high throughput applications.     

Characterisation and quantification of liposome-type nanoparticles in a beverage matrix using hydrodynamic chromatography and MALDI–TOF mass spectrometry

This paper describes the characterisation of liposome-type nanoparticles (NPs) dispersed in a beverage matrix. Characterisation is based on a two-step procedure: first, liposomes are separated on the basis of size in the nanometre range by use of hydrodynamic chromatography (HDC); second, chemical characterisation is performed by use of MALDI–TOF mass spectrometry (MS). Characterisation of three types of Coatsome liposome, a commercially available type of empty liposome, was investigated. All three liposome types, Coatsome A?=?anionic, N?=?neutral, and C?=?cationic, gave single peaks in HDC, reflecting diameters of 153, 187, and 205 nm, respectively. Subsequent MALDI–TOF MS in positive mode furnished major signals at m/z?=?734.5 ([M?+?H]⁺ adduct) and m/z?=?756.6 ([M?+?Na]⁺ adduct) of l-(α)-dipalmitoylphosphatidylcholine (DPPC) monomer and dimeric adducts at m/z?=?1468.1 and m/z?=?1490.1, respectively. MALDI–TOF MS in negative mode gave a signal at m/z?=?721.3 ([M???H]^? adduct) of l-(α)-dipalmitoylphosphatidylglycerol (DPPG), except for Coatsome C which lacks this phospholipid. After HDC separation of Coatsome A NPs the major DPPC and DPPG signals can be detected in the expected fractions by use of MALDI–TOF MS in positive and negative modes, respectively. Validation of the analytical strategy revealed linearity (R ²?>?0.99), repeatability (relative standard deviation <10 %), and reproducibility (relative standard deviation between days <10 %) were good, recovery was 61?±?5 %, and the limit of quantification was 1 mg?mL^?1 in this matrix. With 4 mg Coatsome A mL^?1 20 out of 20 samples furnished the 734.5 and 756.6 signals typical of DPPC in MALDI–TOF MS characterisation.     

Cytotoxicity and Antiproliferative Effect of Hypericin and Derivatives after Photosensitization

The toxicity on three human tumor cell lines (A431, HeLa and MCF7) of five phenanthroperylenequinones (hypericin and derivatives) and two perylenequinones (cercosporin and calphostin C) was investigated after photosensitization (4 J/cm²). Furthermore, the antiproliferative effect on HeLa cells was studied for the phenanthroperylenequinones. Hypericin, 2,5-dibromohypericin, 2,5,9,12-tetrabromohypericin and perylenequinones displayed a potent cytotoxic and antiproliferative effect in the nanomolar range. Hypericin dicarboxylic acid exhibited no photoactivity. In general, the antiproliferative activity correlated well with the photocytotoxicity. However, the nonphotocytotoxic compound hexamethylhypericin showed potent antiproliferative activity in the nanomolar range, probably exerting its action by protein kinase C inhibition. Without light irradiation, no cytotoxic and antiproliferative effect was observed for any photocytotoxic phenanthroperylenequinone compound. Furthermore, confocal laser microscopy revealed that the subcellular localization in A431 cells was similar for the photoactive compounds; the photosensitizers were mainly concentrated in the perinuclear region, probably corresponding with the Golgi apparatus and the endoplasmic reticulum. In addition, the accumulation of the photosensitizers in HeLa cells was investigated. All compounds except hypericin dicarboxylic acid were found to concentrate to a large extent in the cells. The compound 2,5,9,12-tetrabromohypericin seemed intrinsically more effective than hypericin since the intracellular concentration of the bromoderivative was a magnitude of order lower than that of hypericin although both compounds showed similar photobiological activity.