高效液相色谱检测Zn（Ⅱ）、Cd（Ⅱ）、Co（Ⅱ）、Pb（Ⅱ）、Ni（Ⅱ）、Cu（Ⅱ）、Hg（Ⅱ）

用双-(2-羟乙基)二硫代甲酸铵(HEDC)在反相液相色谱中作检测某些金属离子的衍生化试剂，HEDC的金属螯合物微溶于水，可直接水样注射于C18柱中进行检测，范围为0．006～10mg／L相对偏差1％～2％，检测波长254nm，金属汞的整合物在HPLC分析前进行浓缩富集检测限可低至0．06～25μg／L，相对偏差小于2％。     

New efficient organocatalytic oxidation of benzylic compounds by molecular oxygen under mild conditions

Efficient aerobic oxidation of benzylic compounds has been achieved under no irradiation using a new organocatalytic system in the presence of acridine yellow and N-hydroxyphthalimide with assistance of a catalytic amount of molecular bromine. Various substrates, especially alkylaromatics, were effectively oxygenated to the corresponding carbonyl compounds with molecular oxygen as oxidant under mild conditions. For instance, indan was oxidized with 92% conversion and 79% selectivity for 1-indanone under 0.3 MPa of O₂ at 75 °C.     

Electrical potential oscillation in an anionic surfactant system with barbitone in octanol as an oil phase

Studies were made on oscillations across a liquid membrane consisting of an oil layer, octanol containing barbitone, between two aqueous layers: one containing 8 mM SDS with alcohol and the other containing 0.1 M NaCl. The effects of various concentrations of chemical components in this system on the patterns of electrical oscillation were examined. The oscillations may be explained by the mechanism of repetitive formation and destruction of monolayer structures of the dodecyl sulfate anion at the interface between the organic and the aqueous phases, with the effect of proton penetration. This study of potential oscillation across a membrane containing a drug provides the possibility of further investigations in pharmacological activity.     

相转移催化合成增塑剂BBP和水杨醛的研究

相转移催化合成增塑剂ＢＢＰ和水杨醛的研究郭锡坤，高文华，曾东宇（汕头大学化学系，汕头５１５０６３）关键词相转移催化，季铵盐，聚乙二醇，邻苯二甲酸丁苄酯，水杨醛，增塑剂邻苯二甲酸丁苄酯（增塑剂ＢＢＰ）是一种优良的增塑剂．邻羟基苯甲醛（水杨醛）不仅是重要...     

à 3E态CH3N自由基的稳定性

观察到了CH_3N自由基Ã ~3E←X~3A_2体系317-272 nm的荧光激发谱, 特别讨论了振动激发的Ã 态的稳定性. 报导了v_3~′=6态的色散荧光和荧光时间谱, 该态在240 Pa下的寿命大约是80 ns. 实验表明Ã ~3E 态CH_3N自由基是稳定的, 势能面至少距振动基态4800 cm~(-1)内是束缚的, 异构化或预离解作用并不重要.     

Formation and photoluminescence of silver nanoparticles stabilized by a two-armed polymer with a crown ether core

Silver nanoparticles were synthesized by the use of a two-armed polymer with a crown ether core [poly(styrene)]-dibenzo-18-crown-6-[poly(styrene)] based on the flexibility of the polymer chains and the complex effect of crown ether with Ag(+) and Ag. The size of silver nanoparticles could be tailored by controlling the initial concentrations of the polymer and Ag(+), and the molecular weight of the polymer. The emission of silver nanoparticles was blue-shifted, and the intensity of the photoluminescence of silver nanoparticles stabilized by the polymer was significantly increased due to the complex effect between the crown ether embedded in the polymer and the silver nanoparticles.     

Determination of trace amounts of iron by catalytic-adsorptive stripping voltammetry

A highly sensitive and selective voltammetric procedure is described for the determination of trace amounts of iron. The procedure is based on the adsorptive collection of an iron-thiocyanate-nitric oxide complex on a hanging mercury drop electrode. The adsorbed complex catalyzes the reduction of nitrite in solution, which gives a detection limit of 40 ppt iron (30 s accumulation). The stripping current increases linearly with iron concentration up to 80 ppb. The relative standard deviations are 4.2% and 1.6% at 0.5 ppb and 40 ppb respectively. Most of the common ions, except cobalt, do not interfere with the determination of iron. The procedure is applied to determine iron in biological samples, natural waters and analytical-grade chemicals.     

A Novel Plasticizer for the Preparation of Thermoplastic Starch

TPS was a biodegradable material based on starch. Starch was an inexpensive and natural renewable polysaccharide, which was widely investigated as the substitute of petroleum-derived plastics. Native starch commonly existed in granule structure with about…     

Voltammetric determination of trace amounts of gold(III) with a carbon paste electrode modified with chelating resin

A carbon paste electrode modified with chelating resin (ammino-isopropylmercaptan-type cross-linked chelating resins) for the voltammetric determination of gold(III) was characterized by cyclic voltammetry. The gold(III) ion is accumulated on the surface of the modified electrode only by the chelating effect of the modifier in the carbon paste, without application of a potential. After exchange of the medium the accumulated amount of gold(III) is determined by voltammetry in a blank electrolyte solution. The response depends on both the concentration of gold and the accumulation time. For a 5-min preconcentration time, a linear calibration graph was obtained in the range 3 × 10^?8-1 × 10^?6 M and the detection limit was about 1 × 10^?8 M. A combination of chemical and electrochemical renewal allows the use of a single modified electrode in multiple analytical determinations over several days. For ten preconcentration—determination—renewal cycles [2 × 10^?7 M Au(III)], the response could be reproduced with 4.7% relative standard deviation. Many parameters such as the composition of the paste and pH influence the response of the measurement. Many other metal ions have no or little effect on the determination of gold. The procedure was applied to the determination of gold in minerals, copper and anode mud, with good results.