吉普-加油站问题

利用最优序列方法研究了吉普－加油站问题,确定了单向行驶吉普－加油站问题和往返行驶吉普－加油站问题的最优序列。     

FRACTAL PROPERTIES OF STATISTICALLY SELF-SIMILAR SETS I

In this paper,authors compute the Packing dimension of statistically selfsimilar sets and obtaine the dimension and dimension distribution of statistically selfsimilar measure.     

平均熵

设Ｔ为紧度量空间Ｘ上的连续自映射,ｍ为Ｘ上的Ｂｏｒｅｌ概率测度,通过把测度（拓扑）摘局部化,引入了Ｔ关于ｍ的平均测度（拓扑）熵的概念,它们分别为相应ｍ－测度（拓扑）混沌吸引子熵的加权平均,从而Ｔ关于ｍ的平均测度（拓扑）熵大于零当且仅当Ｔ有ｍ－测度（拓扑）混沌吸引子．证明了线段Ｉ上关于Ｌｅｂｅｓｇｕｅ测度平均拓扑熵大于Ｃ与等于零的连续自映射都在Ｃ０（Ｉ,Ｉ）中稠密．     

A Simplified Formulation to Estimate Influence of Gearbox Parameters on the Rattle Noise

Occurrence of gear rattle in transmission systems can result in severe vibration and noise, which in applications such as automobiles is an important source of user discomfort. As a result , the reduction of the rattling noise has attracted lot of concerns. The rattling noise level is affected by several gearbox parameters, an understanding of which is essential to prevent the expensive design modifications at later stages of product development. To develop such understanding at the gearbox design stage, this paper analytically evaluates the gear parameters’ effect on the root mean square of the wheel gear acceleration under idling condition, which is known to be linearly correlated to the rattling noise level. Therefore, this evaluation allows for an investigation of the gear parameters’ influence on the rattling noise as well. This method is then verified by comparing the analytical results with the simulation results from a dynamic model built in SIMPACK as well as previously published experimental results. Thus, the proposed analytical evaluation method can optimize the gearbox specifications at the design stage to reduce the gear rattle noise level.     

二极管激光侧面泵浦腔内倍频Nd：YAG板条激光器研究

用准连续６０Ｗ的二极管激光列阵侧面泵浦“之”字形Ｎｄ：ＹＡＧ板条激光器，当泵浦功率为４５Ｗ，脉宽为４００μｓ时，得到３．５ｍＪ的激光输出。用ＫＤ＊Ｐ电光开关调Ｑ，得到１８ｎｓ（ＦＷＨＭ）、２ｍＪ的脉冲激光输出，用ＫＴＰ晶体作腔内倍频，得到１５ｎｓ、０．８５ｍＪ的二次谐波激光输出。在腔内无调Ｑ元件且腔长小于５ｃｍ时，于近阈值处得到单频绿光输出，而当泵浦功率稍大，腔内有数个纵模振荡时，观察到激光的反相态，并用数值模拟的结果对此作了解释。     

半导体激光泵浦预激光锁模调Q固体激光器研究

报道半导体激光侧面泵浦预激光锁模调Ｑ的Ｎｄ：ＹＡＧ固体板条激光器，预激光锁模调Ｑ的激光脉冲宽度为３６ｐｓ，调Ｑ包纤各心的锁模单脉冲能量超过７μＪ，相应的峰值功率达２００ｋＷ。     

频域盲源分离与波束形成结合抑制方向性强干扰方法

针对方向性强干扰严重影响无源声呐弱目标检测的问题,提出了频域盲源分离与波束形成结合的干扰抑制方法:以子带分解的方法实现宽带干扰抑制。对每个子带进行频域盲源分离,并估计出各分离信号的方位,将与给定强干扰方位匹配的分离信号置零,利用估计的解混矩阵和处理后的分离信号重构回阵元域信号并进行波束形成实现目标方位估计。声呐模拟器数据与海试数据验证结果表明,相对于传统零陷常规波束形成与零陷最小方差无失真响应波束形成方法有2 dB以上的增益,约6 dB的背景级降低,证明该方法在抑制方向性强干扰方面是有效的。     

A study on waviness induced vibration of ball bearings based on signal coherence theory

This paper focuses on the effects of waviness on vibration of ball bearings. An experimental analysis method is developed by adopting signal coherence theory of multiple-inputs/single-output (MISO) system. The inputs are waviness excitations of the inner and outer races, and the output is vibration response of the outer ring. Waviness excitation signals are first derived from the manufacturing deviations, and found to be strongly coherent in low frequency range. Virtual input signals are then introduced by the method of orthogonalization. In both cases of vibration acceleration and speed responses, the cumulated virtual input–output coherence function verifies that the first peak region of vibration spectrum is mainly induced by the waviness excitations. In order to distinguish the contributions of the inner and outer races, coherence functions of the virtual inputs with real inputs are calculated, and the results indicate that the outer race waviness contributes more to vibration than the inner race waviness does in the example. Further, a multi-body dynamic model is constructed and employed to frequency response analyses. It is discovered that the waviness induced spectral peak frequency is close to the natural frequency of bearing.     

Molecular imprinting in ionic liquid-modified porous polymer for recognitive separation of three tanshinones from Salvia miltiorrhiza Bunge

Five ionic liquid-modified porous polymers with different imidazolium-based functional groups were obtained. A molecular imprinting technique was introduced to form the ordered functional groups in the porous structure. The adsorption isotherm was applied to investigate the interactions between the polymers and target compounds: cryptotanshinone; tanshinone I; tanshinone IIA. Thorough comparison revealed that the polymer with a carboxyl group possessed the highest reorganization of the three compounds. After that, the obtained polymer was applied as the sorbent in the solid-phase extraction process to separate the target compounds from methanol extract. The loading volume of extract solution on the sorbent was determined by adsorption isotherm equation and practical test. Under optimized washing and elution conditions, 0.35 mg/g of cryptotanshinone, 0.33 mg/g of tanshinone I, and 0.27 mg/g of tanshinone IIA from plant were obtained by quantitative HPLC analysis. Moreover, six commercial functional drinks containing tanshinones were purified and analyzed.     

Mathematical modeling and sustained release property of a 5-fluorouracil imprinted vehicle

In the present research, a type of imprinted hydrogels, in which 5-fluorouracil is complexed non-covalently to the monomers and cross-linked into the hydrogel matrix, is synthesized in order to evaluate the possibility of their applications in sustaining the release of 5-fluorouracil due to the drug’s heightened interactions with the imprinted binding sites. Because of the hydrophility, hydrogels can absorb large amounts of water. As a result, drug release mechanisms are different from hydrophobic polymers. Mathematical model has been established to predict the drug release from the hydrogel matrix as a function of time. The drug release mechanism when immersed in release medium is discussed based on mathematical analysis. Swelling studies are performed and the capability of the hydrogels to reload 5-fluorouracil in aqueous solutions is evaluated. In vitro release studies after reloading are conducted. Mathematical analysis suggest that drug release kinetics from the hydrogels fit Fickian mechanism, further evaluation of the fitness for different hydrogel types reveal that the conformation of binding sites can play a very important role in deciding the kind of drug release mechanism. Experiments reveal that all hydrogels show swelling property. The imprinted hydrogels bind much more 5-fluorouracil than non-imprinted ones, and they sustain 5-fluorouracil release better than non-imprinted hydrogels. This research indicates that the imprinted hydrogels would be a potential promising device for drug delivery.