Fabrication of two biomimetic superhydrophobic polymeric surfaces

Two biomimetic superhydrophobic polymeric surfaces were obtained by a simple approach under ambient atmosphere. Water and ethanol were used as the nonsolvents in the method of phase separation in different systems. The influences of various factors in the process were investigated. Both of the as-prepared films showed excellent superhydrophobicity, depending on the high contact angle and the low contact angle hysteresis. Moreover, the classic and a new modified Cassie-Baxter relation were used on the polystyrene and poly-α-methyl styrene films to confirm the superhydrophobic performance.     

The reliability of measurements on electron energy distribution function in silane rf glow discharges

Electron energy distribution function (EEDF) is a key parameter of plasmas, which is directly proportional to the second derivative of the probe I-V characteristics. Because of an amplifying effect of unavoidable noises in the experimental probe I-V curves during the derivation process, the experimental I-V curves should be smoothed before performing the numerical derivation. This paper investigates the effect of adjustable factors used in the smoothing process on the deduced second derivative of the I-V curves, and an optimum group of the adjustable factors is selected to make the rms deviation of the smoothed I-V curves from the measured curves less than 1%. A simple differentiation circuit is designed and used to measure the EEDF parameter straightforwardly. It is the first time, so far as we know, to measure the EEDF parameters simultaneously by means of both numerical and circuit derivative methods under the same discharge conditions and on the same discharge equipment. The deviation between two groups of mean electron energy E and electron density n_e obtained by the above different methods is within about 7%. This apparently improves the reliability of the measurements of the EEDF parameters.     

A theoretical and experimental study on all-normal-dispersion Yb-doped mode-locked fiber lasers

We report on a theoretical and experimental study of an all-normal-dispersion (ANDi) Yb-doped mode-locked fiber laser, in which nonlinear polarization rotation (NPR) is used to realize mode-locking without any dispersion compensation. Based on the coupled nonlinear Schrdinger (CNLS) equation, a model simulating the mode-locked process of an allnormal-dispersion ring fiber laser is developed, which shows that the achievement of stable mode-locking depends on the alignment of the polarization controller (PC) along the fast-polarization axis of the fiber, the birefringence intensity, and the net cavity dispersion. According to the theoretical analysis, stable mode-locked pulses with pulse duration 300 ps and average output power 33.9mW at repetition rate 36MHz are obtained.     

缺口件疲劳寿命分布预测的有效应力法

论文提出了一种由光滑件疲劳寿命试验数据预测缺口件疲劳寿命分布的有效应力法.该方法中缺口件的裂纹可能萌生表面被分解成一个个微元,整个表面可看成是这些微元组成的一个串联模型,按照串联概率失效模型,缺口件的疲劳强度失效概率就可以由各微元的疲劳强度失效概率计算得到,其中微元的疲劳强度失效概率是由光滑件的疲劳强度失效概率通过最弱环节理论计算得到的.在缺口件的疲劳强度失效概率表达式中,引入了有效应力的概念,用它查取光滑件的疲劳寿命试验数据就可以直接得到缺口件的疲劳寿命分布.该方法可以同时考虑到应力梯度和试件尺寸对缺口件疲劳寿命分布的影响.进行了材料LY12CZ的带中心孔缺口件的寿命算例分析,预测结果和试验结果吻合良好,表明该方法是有效的.     

Synthesis of two dihydropyrroloindoledione‐based copolymers for organic electronics

Two novel dihydropyrroloindoledione (DPID)‐based copolymers have been synthesized in a two directional approach and characterized (gel permeation chromatography (GPC), ultraviolet‐visible (UV–vis), cyclic voltammetry, and computational models). These planar, broad absorption copolymers show promise for use in organic electronics, with deep energy levels and low bandgaps. The two‐directional Knoevenagel condensation used demonstrates the versatility of DPID as a useful yet underexploited conjugated unit. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Combining renewable gum rosin and lignin: Towards hydrophobic polymer composites by controlled polymerization

Rosin polymer–grafted lignin composites were prepared via “grafting from” atom transfer radical polymerization (ATRP) with the aid of 2‐bromoisobutyryl ester‐modified lignin as macroinitiators. Three different monomers derived from dehydroabietic acid (DA) were used for execution of grafting from ATRP, while DA was separately attached onto lignin by a simple esterification reaction. Kinetic studies indicated controlled and “living” characteristics of all monomer polymerizations. Thermal studies indicated that rosin polymer–grafted lignin composites exhibited glass transition temperatures in a broad temperature range from ～20 to 100°C. The grafting of both DA and rosin polymers significantly enhanced hydrophobicity of lignin. Static contact angle measurement of water droplets showed ～90° for all these rosin modified lignin composites. X‐ray photoelectron spectroscopy demonstrated that the surface of rosin–lignin composites was dominated with chemical compositions originating from the hydrocarbon rich rosin moiety. The impartation of hydrophobicity of rosin into lignin provided excellent water resistance of this class of renewable polymers, as all rosin‐modified lignin composites showed water uptake below 1.0 wt %. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Novel perfluorocyclobutyl aryl ether‐based well‐defined amphiphilic block copolymer

A series of fluorine‐containing amphiphilic diblock copolymers comprising hydrophobic poly(p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate) (PTPFCBPMA) and hydrophilic poly(2‐(diethylamino)ethyl methacrylate) (PDEAEMA) segments were synthesized via successive reversible addition fragmentation chain transfer (RAFT) polymerizations. RAFT homopolymerization of p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate was first initiated by 2,2′‐azobisisobutyronitrile using cumyl dithiobenzoate as chain transfer agent, and the results show that the procedure was conducted in a controlled way as confirmed by the fact that the number‐average molecular weights increased linearly with the conversions of the monomer while the polydispersity indices kept below 1.30. Dithiobenzoate‐capped PTPFCHPMA homopolymer was then used as macro‐RAFT agent to mediate RAFT polymerization of 2‐(diethylamino)ethyl methacrylate, which afforded PTPFCBPMA‐b‐PDEAEMA amphiphilic diblock copolymers with different block lengths and narrow molecular weight distributions (M_w/M_n ≤ 1.28). The critical micelle concentrations of the obtained amphiphilic diblock copolymers were determined by fluorescence spectroscopy technique using N‐phenyl‐1‐naphthylamine as probe. The morphology and size of the formed micelles were investigated by transmission electron microscopy and dynamic light scattering, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Palladium(II)-catalyzed oxidative Heck coupling of thiazole-4-carboxylates

Oxidative Heck coupling of thiazole-4-carboxylates via palladium(II)-catalyzed C-H bond activation has been achieved in moderate to good yields. No ligand, and no acidic additive were used in the reaction. The results showed that this protocol tolerated a series of substitutions on the thiazole ring. A preliminary attempt of direct arylation with p-xylene via Pd(II)-catalyzed C-H bond activation has also been done.