氨基酚异构体的离子对反相液相色谱分析的研究

本文研究了离子对反相液相色谱分析氨基酚异构体的可能性、影响因素和色谱条件，发现以含４×１０－８ｍｏｌ／Ｌ四丁基碘化铵、０．１８４ｍｏｌ／Ｌ醋酸钠的甲醇水溶液（２３：７７）作为流动相，ＯＤＳ为固定相时可以实现氨基酚异构体的良好分离。     

烯丙基碘和锡与醛的选择加成反应

含活性基团的醛可与烯丙碘和锡粉直接进行亲核加成反应，得到高烯丙基的醇，水的存在不利于此反应的进行，与烯丙基溴相比，烯丙基碘反应活性更强，可在短时间内得较高的产率。     

Binding of wogonin to human serum albumin: a common binding site of wogonin in subdomain IIA

The binding of wogonin to human serum albumin (HSA) has been studied by spectroscopic method including circular dichroism (CD), infrared spectra (IR) and fluorescence spectra. The fluorescence properties of HSA were examined in presence of wogonin and the fluorescence intensity of HSA was significantly decreased in the presence of wogonin. The binding parameters of wogonin were studied from the fluorescence decreasing of HSA by the fluoremetric titrations. The Stern-Volmer plots indicated that the binding of wogonin to HSA at 296, 303, 310 K is characterized by one binding site with the binding constant K(S-V) at 1.872 x 10(5), 1.561 x 10(5), 1.392 x 10(5), respectively, which are good agreement with the results from the Scatchard plots. The binding process was exothermic, enthalpy driven and spontaneous, as indicated by the thermodynamic analyses, and the major part of the binding energy is hydrophobic interaction, which were consistent with the result of molecule modelling study, and there are also a numbers of hydrogen bonds between wogonin and HSA. Furthermore, the displacement experiments indicate that wogonin can bind to the subdomain IIA, that is, the site I of HSA, which is also good agreement with the result of molecule modelling study.     

Highly efficient visible-light photocatalytic ethane oxidation into ethyl hydroperoxide as a radical reservoir

Photocatalytic ethane conversion into value-added chemicals is a great challenge especially under visible light irradiation. The production of ethyl hydroperoxide (CH₃CH₂OOH), which is a promising radical reservoir for regulating the oxidative stress in cells, is even more challenging due to its facile decomposition. Here, we demonstrated a design of a highly efficient visible-light-responsive photocatalyst, Au/WO₃, for ethane oxidation into CH₃CH₂OOH, achieving an impressive yield of 1887 μmol g_cat⁻¹ in two hours under visible light irradiation at room temperature for the first time. Furthermore, thermal energy was introduced into the photocatalytic system to increase the driving force for ethane oxidation, enhancing CH₃CH₂OOH production by six times to 11 233 μmol g_cat⁻¹ at 100 °C and achieving a significant apparent quantum efficiency of 17.9% at 450 nm. In addition, trapping active species and isotope-labeling reactants revealed the reaction pathway. These findings pave the way for scalable ethane conversion into CH₃CH₂OOH as a potential anticancer drug.

Highly efficient visible-light driven photocatalytic oxidation of ethane into ethyl hydroperoxide was realized for the first time over Au/WO₃.     

6AZO-CONTAINING SELF-ASSEMBLY ULTRA-THIN FILMS AND THEIR PHOTOVOLTAIC PROPERTIES

A kind of azo-containing resin (Azo-R) was synthesized by a simple way through the coupling reaction of 2-nitro-N-methyldiphenylamine-4-diazoresin (NDR) with phenol, and a new covalentely attached multilayer film from Azo-R as H-donor and photosensitive diazoresin, diphenylamine-4-diazoresin (DR) as H-acceptor via H-bonding attraction by selfassembly technique has been fabricated. Following the decomposition of diazonium group of DR under exposure to UV light, the H-bonds between the layers of the film convert to covalent bonds and the film becomes very stable toward polar solvents or electrolyte aqueous solutions. Thus the UV-irradiated azo-containing films can be used to measure photocurrent in a conventional three-electrode photoelectrochemical cell using KCl as supporting electrolyte. It was confirmed that the azo-containing multilayer film is responsible for the photocurrent generation.     

实验室废液的回收及效果评价——以“铬废液回收及评价”为例

This paper introduces an experiment about waste liquid recovery and effect evaluation in laboratory. Through this experiment, the basic operations of crystal preparation, chemical analysis and instrumental analysis are further consolidated. At the same time, it allows students to experience a series of possible problems of condition selection and control in the process of waste liquid treatment. We hope to improve the students' ability to analyze and solve problems, enhance their interest in learning, and strengthen their humanistic education.     

Highly efficient rhodium/monodentate phosphoramidite catalyst and its application in the enantioselective hydrogenation of enamides and alpha-dehydroamino acid derivatives

An easily prepared and highly efficient monodentate phosphoramidite ligand derived from BINOL, (S)-2,2'-O,O-(1,1'-binaphthyl)-dioxo-N,N-diethylphospholidine, was examined in the hydrogenation of both enamides and alpha-dehydroamino acid derivatives. The catalyst provided remarkably high enantioselectivities (up to 99.6% ee for enamides and >99.9% ee for alpha-dehydroamino acid derivatives).     

Temperature-programmed desorption and adsorption of hydrogen on Mo2N

Hydrogen adsorption-desorption over Mo₂N has been studied using a temperature-programmed technique. It is revealed that hydrogen on Mo₂N exhibits very high mobility leading to migration of the surface hydrogen into the sublayer and bulk of the sample or the reverse. The surface hydrogen species are preferentially formed when adsorption is carried out below 573 K. On increasing the adsorption temperature to above 573 K, the quantity of hydrogen species located in the sublayer or/and bulk of the Mo₂N sample increases significantly.     

Detection of metal ions using ion-channel sensor based on self-assembled monolayer of thioctic acid

Gold electrodes were chemically modified with thioctic acid monolayer designed to mimic biological ion-channel membranes. The technique was then used in the determination of alkali, alkaline earth, thallium(I), and lanthanum metal cations as analytes. Cyclic voltammograms (CV) of [Fe(CN)6]³⁻ an electroactive marker, were measured in the presence of the various types of analyte cations. In the absence of the analyte cation, electrostatic repulsion between the marker anions and the carboxylate groups of the receptor monolayer hindered the approach of the marker anion to the electrode surface and hence hindered its reduction. The modified electrodes responded well to the metal cations except the alkali metal cations. The sensors could detect the trivalent cation La³⁺ at concentrations as low as 10⁻⁸ M. The response of the sensor to the metal cations increase in the order alkali metal3+ can be discriminated in the ratio 1:100. This makes it possible to determine the trivalent ion in a sample matrix containing monovalent and divalent cations. Thallium(I) ion showed marked deviation in its response as compared to monovalent ions of the alkali metals. The ion-channel sensor based on self-assembled monolayer of thioctic acid therefore offers a potential alternative technique for the selective determination of metal ions.