Er:Yb:KGW激光晶体生长及缺陷研究

采用顶部籽晶(TSSG)法生长ErYbKGW晶体.通过研究助熔剂的种类、组成与溶质的比例关系对晶体生长的影响,设计了合理的工艺条件转速30～40 r·min-1;拉速1～2 mm·d-1;降温生长速率0.05 ℃·h-1;降温速率15 ℃·h-1;生长周期15～20 d.通过对晶体缺陷的观察分析认为,晶体裂缝及包裹物等缺陷与生长工艺条件密切相关,应尽量减少生长过程中的温度、浓度及生长速度的波动,保持晶体的稳态生长.     

Behaviour of organic pollutants in paper and board samples intended to be in contact with food

This paper deals with the study of volatile compounds present in a set of three paper and board (P&B) samples of different composition, surface treatment, grammage and thickness. The volatile compounds released by the packaging material (P&B) can be trapped on the food and may then affect the safety and health of consumers. To evaluate if the recycled P&B could be used as food packaging material, adsorption studies have been performed with a selection of chemical substances. The adsorption isotherms are provided. Partition coefficients between paper and air have been calculated for a series of volatile compounds used as model compounds to represent different families of contaminants commonly present in P&B. Values from 4 to 3243 were obtained at different temperatures. The analysis of volatile compounds have been carried out by automatic headspace coupled on-line with GC/MS in SIM mode. The results obtained are shown and discussed.     

A quantum scattering study of collinear state-testate reaction probabilities for the F + H2(v) → HF(v') + H system

A new quantum scattering approach (linear combination of arrangement channels-scattering wavefunction, LCAC-SW) proposed by Deng and his co-workers is used to calculate collinear state-to-state reaction probabilities for the F + H₂(v) → HF(v') + H system. Several interesting problems such M threshold energy, compound states and enhance by translational energy of the reactants and the vibration excitation of products are discussed and they are compared with other theoretical investigations reported in the literature. It is shown that the LCAC-SW approach is the successful one of quantum scattering methods.     

(Pd-Cu)/C上苯乙烯氧化羰化合成肉桂酸甲酯的研究

在常压130℃下研究了Pd-Cu催化剂组成,反应温度,少量添加剂和原料气中O_2含量等对苯乙烯氧化羰化合成肉桂酸甲酯的影响,并对催化剂的形、相态进行表征.发现O_2有双重作用;O_2不仅使Pd-Cu之间的价态循环,而且能抑制反应过程中饱和苯丙酸甲酯的生成.指出催化反应中Pd-Cu之间的催化协同效应促进了产物的生成.初步讨论了本反应的机理.     

含钼化合物及其配合物的抗癌抗肿瘤活性

钼是生命体所必需的微量元素。本文介绍了钼在人体中的作用，钼缺乏和钼过量对人体的影响，并介绍了含钼化合物以及配合物的抗癌抗肿瘤研究情况。     

Core/shell particles containing 3-(methacryloxypropyl)-trimethoxysilane in the shell: synthesis, characterization, and application

In comparison to the corresponding single-component counterparts, core/shell particles are widely used due to their better physical and chemical properties. The surface properties of core/shell particles evidently play an important role in the process of application. It is easy to deduce that surface properties mostly depend on the properties of the component in the shell. Therefore, desirable materials of shell are very significant for the study of composite materials, especially in core/shell field. It is well known that polysiloxane has excellent properties, such as the water repellency, high flexibility, low surface energy, and biocompatibility. Its application, however, is limited due to poor cohesiveness and poor film-forming properties. Recently, much endeavor has been made to overcome such flaws. It is found that polyacrylate is commonly considered for its good cohesiveness and excellent film-forming property. The combination of polysiloxane and polyacrylate has been shown to be important in the composite material field, especially as core/shell particles. Unfortunately, their hydrophobicity is considerably different and thus, the core/shell particles consisting of polyacrylate (PA)/polysiloxane (PSi) are hard to prepare by general seeded emulsion polymerization, and are also scarcely available in the literature. In this study, the new core/shell PA/PSi particles with poly(butyl methacrylate) (PA) as the core and poly(3-(methacryloxypropyl)-trimethoxysilane) (PSi) as the shell were prepared by dispersion polymerization under the kinetically controlled conditions. The characterization of the particles by TEM, DSC, particle size analyzer as well as static contact angle confirmed the formation of core/shell structure. The application of core/shell (PA/PSi) particles also has been considered and discussed here.TEM micrographs of core/shell (PA/PSi) particles.     

茂基稀土胺化物与异氰酸正己酯的反应-{(MeC5H4)2Yb[OC(NPh2)N(n-hexyl)]}2的合成及表征

茂基稀土胺化物(MeCp)2YbNPh2(THF)与异氰酸正己酯(n-HexylNCO)按11摩尔比反应, 分离出产物{(MeC5H4)2Yb[OC(NPh2)N(n-hexyl)]}2. 产物经元素分析和核磁共振表征, 并测定了其晶体结构. 配合物属三斜晶系, R-3空间群, 晶胞参数为a=2.9533(11) nm, b=2.9533(11) nm, c=1.5873(6) nm, V=11.9896(80) nm3, Z=9, Dc=1.562 mg·m-3, μ=3.536 mm-1 (Mo Kα), F(000)=5670, R=0.034, Rw=0.064. 该化合物具有二个对称氧桥的双分子结构, 并存在着由氮原子向中心金属镱分子内配位而形成的三环骨架, 中心金属镱的配位数是九, 整个分子呈中心对称.     

电极条件对硫酸介质中电解还原提纯镱过程的影响

研究了以钌铱钛合金网和汞分别为阳、阴电极, 在无气氛保护条件下, 采用电解还原方法从铥、镱、镥硫酸盐溶液中分离提纯镱的过程. 讨论了在8 V恒电压时的电极间距、位置, 以及阴、阳极表面积对电解过程中的电流、还原率影响. 优化了电解还原过程, YbSO4产品的纯度稳定达到99.5%以上, 一次收率可达80%;提镱后母液中的铥和镥被富集4倍以上, 其中Lu含量高于50%, 十分有利于后续铥/镥分离.     

析相光度法测定铜（Ⅱ）的研究

本文研究了Ｃｕ（Ⅱ）－ＰＥＧ（聚乙二醇－２０００）－Ｚｉｎｃｏｎ（锌试剂）－（ＮＨ４）２ＳＯ４体系的析相光度法并应用于测定Ｃｕ（Ⅱ）。最宜酸度为ｐＨ５．５～８．５（ＫＨ２ＰＯ４－Ｋ２ＨＰＯ４）缓冲溶液）其络合物的最大吸收位于６１０ｎｍ，表观摩尔吸光系数为４．０×１０＾４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，Ｃｕ（Ⅱ）浓度在０～１．５ｍｇ／Ｌ范围内服从比尔定律，铜与Ｚｉｎｃｏｎ形式组成为１：２的稳定的蓝色络     

压力流驱动电色谱分析方法及其若干色谱行为

压力流驱动电色谱分析方法是一种新型色谱技术。它组合了ＨＰＬＣ和电泳两种技术，为分离提供了更多可控制的因素。介绍了压力流驱动电色谱的装置和毛细管电色谱柱的装置方法，从理论上讨论了影响电色谱分离的因素并用实验数据加以证明。最后尝试性地将电色谱法用于测定香蕉样品中萨索啉（Ｓａｌｓｏｌｉｎｏｌ）等的含量。