初态对光波导阵列中连续量子行走影响的研究

本文使用近邻耦合模型得到的解析解,分析了周期性波导中输入态对量子行走的粒子数的概率分布函数 和二阶相干性的影响.结果表明:输入态的对称性质对量子行走过程的二阶相干度有影响, 而对粒子数的概率分布函数影响不大. 关键词： 周期性光波导阵列 量子行走 二阶相干度 纠缠态     

有机半导体异质界面电荷传输解析模型研究

有机半导体多层薄膜器件的性质很大程度上由有机-有机界面的传输性质所决定，但是现有的关于有机-有机界面的分析模型很难适用于实际器件的模拟.以Miller-Abrahams跳跃传导理论为基础，充分考虑有机-有机界面和金属-有机界面性质的不同，建立了一个新的描述有机-有机异质界面电荷传输的解析模型.结果表明有机异质界面的载流子传输不仅取决于界面的肖特基势垒，而且还取决于界面附近两边的电场强度和载流子浓度.此模型可用于有机半导体多层薄膜器件的电流密度、电场分布和载流子浓度分布的自洽计算. 关键词： 有机半导体 界面 载流子传输     

SQUID用于铍材残余应力检测的计算机模拟

依据SMM-601型超导量子干涉显微镜检测部分构建计算模型,采用电磁场有限元方法分析了残余应力引起的非磁性金属材料铍电导率变化对超导量子干涉仪(SQUID)检测信号的影响,并讨论了该方法实际应用于非磁性金属材料残余应力检测的条件和可能性。     

HT-7U装置极向场电源变流系统的研制

介绍了HT-7U极向场电源中所使用的变流系统,提出了一种新的四象限运行控制方法,解决了极向场电源设计和制造的难点。实现了15kA的有环流运行。     

Electro-optically Q-switched Nd:YVO4 slab laser with a high repetition rate and a short pulse width

We report on a compact and highly efficient diode-end-pumped TEM00 Nd:YVO4 slab laser with an output power of 103 W and beam quality M2 < or = 1.5. The optical-to-optical efficiency was 41.5%. In electro-optically Q-switched operation, 83 W of average power at a pulse-repetition rate of 50 kHz with a pulse length of 11.3 ns was obtained. At a pulse-repetition rate of 10 kHz, 5.6 mJ of pulse energy, and 870 kW of peak power were measured.     

Room temperature diluted magnetic semiconductor synthesized by dual beam laser deposition

Diluted magnetic semiconductor Co-doped ZnO film has been synthesized by a dual beam pulsed laser deposition method. The magnetic, electrical, and optical properties of the Zn_0.985Co_0.015O_0.67 film are studied in this paper. The film shows ferromagnetic behavior with a coercivity of about 300 Oe at room temperature, and semiconductor behavior with carrier concentration of 2.2×10¹⁸ cm^-3, and a resistivity of 102 mcm. Structural investigations indicated that the film has similar lattice constants to that of ZnO. It is shown that the film exhibits excellent optical properties with a band gap energy of 3.31 eV, which is close to that of ZnO. The origins of the magnetism are also discussed. PACS 81.15.Fg; 75.50 Pp; 61.72.Vv     

A sensitive method of determining optic axis azimuth based on laser feedback

A sensitive method to determine the optic axis azimuth of the birefringence element is presented, which is based on laser feedback. The phase difference between the two intensities in birefringence feedback changes with the angle between the optic axis of the birefringence element and laser original polarization. The phase difference is highly sensitive to the relative position of the optic axis and the laser original polarization. This method is used to highly precisely determine the optic axis azimuth, and is able to distinguish between the fast axis and the slow axis of the birefringence element. Theoretical analysis and experimental results are both demonstrated.     

拖线阵机动时的自适应波束形成

提出了一种MVDR(最小方差无失真响应)的改进算法,用以解决常规MVDR算法由于阵形时变而出现的性能下降问题。在获得时变阵形估计数据的基础上,该算法以统计时段内的平均阵形为基准阵形,在每个扫描方向上根据实际阵形和基准阵形的差异对阵列互谱矩阵多样本进行相位补偿,从而实现统计时段内的互谱矩阵多样本相干累加和目标检测。数值仿真与海上实验数据处理结果表明:与传统MVDR算法相比,改进算法有效缓解了时变阵形下的目标测向角度模糊问题,可提高拖线阵目标左右舷分辨性能、增强弱目标检测能力。     

全光扫描装置设计及实验研究

针对惯性约束聚变研究中高时间分辨测量的需求,详细分析并设计了一种新型的高时间分辨的全光扫描装置。该装置根据光生载流子效应、波导传输和棱镜色散原理,采用全光学元件,实现了全光器件的类条纹相机扫描功能。设计制作了具有棱镜结构和光偏转功能的全光扫描模块。以1053 nm激光为传输光,527 nm激光为泵浦光,完成了脉宽为8 ps的脉冲激光信号作用下的光偏转实验。从技术上验证了全光扫描技术的可行性。     

金锡共晶互连对HP-LED光热性能的改善

随着功率型LED(HP-LED)对散热的要求越来越高,传统导电银胶越来越难以满足LED的高散热要求。虽然共晶互连工艺是微电子领域中的一种有效的散热互连方法,但是由于LED的特殊性,该工艺在LED互连封装中的性能改善研究还比较少。本文对金锡共晶互连、锡膏互连和银胶互连的3种LED器件分别进行了光学、热学以及剪切力等方面的测试分析研究,结果表明:底部与顶部同时加热的金锡共晶工艺互连的LED器件可以有效地改善仅底部加热共晶互连层中的空洞缺陷,在1 000 mA电流条件下,相对于锡膏、银胶互连的LED器件具有较低的热阻、较稳定的峰值波长偏移、较强的互连层剪切力等性能。金锡共晶互连工艺是一种可以有效改善大功率LED散热及互连强度的方法。