取代对苯二酚醚化物的合成研究

本文从取代的对苯三酚３出发、利用Ｗｉｌｌｉａｍｓｏｎ醚化反应合成了一系列它的醚化产物４ａ－４Ｈ，给出了它们的核磁共振数据（氢谱和碳谱）。讨论了影响醚化反应的一些因素，比较了不同烷化剂发生醚化反应的活泼性。     

Optical investigation of cavitation erosion by laser-induced bubble collapse

By means of a new force sensor based on optical beam deflection (OBD), the mechanical effects of laser-matter interaction underwater at different incident laser energy are investigated in detail. The experimental results show that a target underwater is impacted in turn by laser-plasma ablation force and high-speed liquid-jet impulse induced by bubbles collapse in the vicinity of a solid boundary. Furthermore, the amplitudes of the two forces increase monotonously with laser energy. According to the ablation force detected by the experiment and the theoretical relationship between laser intensity and ablation pressure, the value of liquid-jet impact against a solid boundary can be easily obtained. In addition, based on the model of a collapsing bubble, some characteristic parameters, such as the liquid-jet impact velocity, the maximum bubble radius, the bubble energy can also be obtained at different laser energy, which are valuable in the corresponding research fields.     

SiGe (Ge-dot) heterojunction phototransistors for efficient light detection at 1.3–1.55 μm

The aim of this work is to develop a Si/SiGe HBT-type phototransistor with several Ge dot layers incorporated in the collector, in order to obtain improved light detectivity at 1.3–1.55 μm. The MBE grown HBT detectors are of n–p–n type and based on a multilayer structure containing 10 Ge-dot layers (8 ML in each layer, separated by 60 nm Si spacer) in the base-collector junction. The transistors were processed for normal incidence or with waveguide geometry where the light is coupled through the edge of the sample. The measured breakdown voltage, BV_ceo, was about 6 V. Compared to a p–i–n reference photodiode with the same dot layer structure, photoconductivity measurements show that the responsivity is improved by a factor of 60 for normal incidence at 1.3 μm. When the light is coupled through the edge of the device, the detectivity is even further enhanced. The measured photo-responsivity is more than 100 and 5 mA/W at 1.3 and 1.55 μm, respectively.     

取代基效应(SCS)与乙烯-α-烯烃共聚物的序列结构Ⅲ.定量分析

本文在分析乙烯-α-烯烃共聚物序列结构时,把代表共单体反接单元的亚甲基(CH₂)βγ和γδ分别归属给了二元组VV和三元组EEV。与此同时,CH₂-δδ和δδ⁺归属给了二元组EE。表征乙烯长序列的CH₂-δ⁺δ⁺分属二元组EE和三元组EEE,对应峰强度在EE和EEE之间的分配是处理序列分布的关键。在本文中运用序列结构的Bovey关系和Randall统计进行演算,求得了修正值△的数学表达式,严格解和近似解。在规则链条件下得到的近似解与G.J.Ray的结果完全相同。当共单体含量较少时,谱峰强度Iδ⁺δ⁺的分配接近相等。在二元组和三元组的水平上,乙烯-α-稀烃共聚物的¹³C NMR谱中共有十三个峰,属于CH₂的有十个,属于CH的有三个。利用这些谱峰的强度数据可以建立一套计算公式,由此提供共聚物序列结构的全部信息。因此这是一个研究乙烯-α-烯烃共聚物序列结构的普适方法。     

镁掺杂对In2O3电导和气敏性能的影响

用共沉淀法制备了Mg2 + 掺杂的In2 O3 纳米粉 ,研究了镁掺杂对In2 O3 电导和气敏性能的影响 .结果表明 :MgO和In2 O3 间可形成有限固溶体In2 -xMgxO3 (0≤x≤ 0 .40 ) ;MgIn× 电离的空穴对材料导带电子的湮灭 ,使掺镁纳米粉的电导变得很小 ;n(Mg2 + )∶n(In3 + ) =1∶2共沉淀物于 90 0℃下热处理 4h ,用所得的纳米粉制作的传感器在 32 0～ 370℃下 ,对 45 μmol/LC2 H5OH的灵敏度达 10 2 .5 ,为相同浓度干扰气体Petrol的 12倍多 .     

3族新的不含紧优与几乎紧优的有向双环网络无限族

给出了3族新的不含紧优与几乎紧优的有向双环网络.     

Epoxy resin containing polyphenylsilsesquioxane: Preparation,morphology, and thermomechanical properties

Polyphenylsilsesquioxane (PPSQ) was incorporated into an epoxy resin to prepare organic–inorganic composites, and two strategies were adopted to afford composites with different morphologies. Phase separation induced by polymerization occurred in the physical blending system. However, nanostructured composites were obtained when a catalytic amount of aluminum triacetylacetonate was added to mediate the reaction between PPSQ and diglycidyl ether of bisphenol A (DGEBA). The intercomponent reaction significantly suppressed the phase separation on the micrometer scale. Organic–inorganic composites with different morphologies displayed quite different thermomechanical properties. Both differential scanning calorimetry and dynamic mechanical analysis showed that the nanostructured composites possessed higher glass‐transition temperatures than the phase‐separated composites with the same loading of PPSQ, although the intercomponent reaction between PPSQ and DGEBA reduced the crosslinking density of the epoxy matrix. This result was ascribed to the presence of nanosized PPSQ domains in the nanostructured composites, which acted as physical crosslinking sites and thus reinforced the epoxy networks. The nanoreinforcement of the PPSQ domains afforded the enhanced dynamic storage modulus for the nanostructured composites in comparison with the phase‐separated composites with a PPSQ concentration less than 15 wt %. In terms of thermogravimetric analysis, the organic–inorganic composites displayed improved thermal stability and flame retardancy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1093–1105, 2006     

Investigation of sulfonated poly(ether ether ketone sulfone)/heteropolyacid composite membranes for high temperature fuel cell applications

The sulfonated poly(ether ether ketone sulfone) (SPEEKS)/heteropolyacid (HPA) composite membranes with different HPA content in SPEEKS copolymers matrix with different degree of sulfonation (DS) were investigated for high temperature proton exchange membrane fuel cells. Composite membranes were characterized by Fourier transfer infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). FTIR band shifts suggested that the sulfonic acid groups on the copolymer backbone strongly interact with HPA particles. SEM pictures showed that the HPA particles were uniformly distributed throughout the SPEEKS membranes matrix and particle sizes decreased with the increment of copolymers' DS. The holes were not found in SPEEKS‐4/HPA30 (consisting of 70% SPEEKS copolymers with DS = 0.8 and 30% HPA) composite membrane after composite membranes were treated with boiling water for 24 h. Thermal stabilities of the composite membranes were better than those of pure sulfonated copolymers membranes. Although the composite membranes possessed lower water uptake, it exhibited higher proton conductivity for SPEEKS‐4/HPA30 especially at high temperature (above 100 °C). Its proton conductivity linearly increased from 0.068 S/cm at 25 °C to 0.095 S/cm at 120 °C, which was higher than 0.06 S/cm of Nafion 117. In contrast, proton conductivity of pure SPEEKS‐4 membrane only increased from 0.062 S/cm at 25 °C to 0.078 S/cm at 80 °C. At 120 °C, proton conductivity decreased to poor 0.073 S/cm. The result indicated that composite membranes exhibited high proton conductivity at high temperature. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1967–1978, 2006     

荧光光度法直接测定高纯氧化钕中的痕量镨和铈

使用Ｐ－ＥＬＳ５０荧光光谱仪，在盐酸介质中，用同一激发波长激发，分别测定Ｐｒ（Ⅲ）（ｎｍ）和Ｃｅ（Ⅲ）（３５６ｎｍ）发射峰强度。