Trace element exposure in man by instrumental neutron activation analysis of hair

A nondestructive instrumental neutron activation technique was used to analyze human hair samples collected from people living in metropolitan and rural areas in Korea. Samples were also collected from factory workers and cancer patients. Hair from metropolitan area residents contain higher concentrations of Ca, Mg, Zn, Cu, Na, Br, Mn, I and S than rural area residents. Concentrations of I and S from cancer patients, Mg, Zn, Al, Na, Mn and As from glassware workers were relatively higher. The results show that the trace element concentrations of the hair are possibly related to the trace element concentrations in the body.     

Nonenzymatic Glucose Detection with Good Selectivity Against Ascorbic Acid on a Highly Porous Gold Electrode Subjected to Amalgamation Treatment

A nonenzymatic glucose sensor with good selectivity for the ascorbic acid oxidation is presented. After the gold polycrystalline electrode was subjected to amalgamation treatment, two advantageous effects were observed. One is the enhancement of the surface roughness and the other is an increase in the catalytic current in the glucose oxidation. Besides the known first effect, the latter provided another advantageous effect in a fabrication of nonenzymatic glucose sensor. Using a gold electrode subjected to amalgamation treatment for 60 s, two calibration curves for glucose oxidation at two different potentials of ?0.1 V and 0.25 V were obtained and compared. At the potential of ?0.1 V, at which no ascorbic acid was oxidized and no interference effect was observed, a current sensitivity of 16 μA cm^?2 mM^?1 from zero to 10 mM glucose concentration range was obtained. At the other potential of 0.25 V, at which ascorbic acid was easily oxidized, a satisfactory calibration curve with negligible ascorbic acid interference was also obtained together with a more enhanced current sensitivity of 32 μA cm^?2 mM^?1.     

Filler-elastomer interactions: influence of silane coupling agent on crosslink density and thermal stability of silica/rubber composites

In this work, the crosslink density and thermal stability of the silica/rubber composites treated by silane coupling agents, i.e., gamma-aminopropyl triethoxysilane (APS), gamma-chloropropyl trimethoxysilane (CPS), and gamma-methacryloxypropyl trimethoxysilane (MPS), were investigated. The chemical structures of modified silicas were studied in term of solid-state 29Si NMR spectroscopy. The crosslink density of the composites was determined by swelling measurement. The development of organic functional groups on silica surfaces treated by coupling agents led to an increase in the crosslink density of the composites, resulting in increasing final thermal stability of the composites. The composites treated by MPS showed the superior crosslink density and thermal stability in these systems. The results could be explained by the fact that the organic functional groups of silica surfaces by silane surface treatments led to an increase of the adhesion at interfaces between silicas and the rubber matrix.     

Zeb1 for RCP-induced oral cancer cell invasion and its suppression by resveratrol

Rab coupling protein (RCP) is upregulated in head and neck squamous cell carcinoma (HNSCC) and is correlated with the progression and survival of patients. However, the role of RCP in one of the aggressive types of HNSCC, oral squamous cell carcinoma (OSCC), remains elusive. In the present study, we identified the important role of Zeb1 in RCP-induced OSCC epithelial-to-mesenchymal transition (EMT) and invasion. RCP induces Zeb1 expression, and silencing Zeb1 expression significantly inhibits RCP-induced OSCC invasion. In addition, Zeb1 upregulates MT1-MMP expression to promote OSCC EMT and invasion. Furthermore, we observed that the β1 integrin/EGFR/β-catenin signaling cascade mediates RCP-induced Zeb1 expression to promote OSCC invasion. Notably, we provide evidence that resveratrol (REV) strongly inhibits RCP-induced Zeb1 expression through blocking β1 integrin endosome recycling and EGFR activation, leading to suppression of RCP-induced OSCC invasion, demonstrating the important role of RCP in OSCC invasion and its reversion by REV. Collectively, the present study provides evidence for the first time that RCP aggravates OSCC invasion through increasing Zeb1 expression and subsequently upregulating MT1-MMP expression and that this process is reversed by REV, providing novel biomarkers and indicating the therapeutic potential of REV in OSCC.Subject terms: Oral cancer, Cell invasion     

ToF-SIMS analysis of surface-anchored organometallic clusters

ToF-SIMS analysis of the organometallic cluster Os₃(μ-H)(CO)₁₀(μ-SCH₂CH₂SH) chemically attached onto a silver or gold surface, and of the cluster fragment Os₃(μ-H)(CO)₁₀(μ-OSi) on a silica surface, allows for identification of the surface organometallic species, and also gives information on its reactivity.     

Comparative studies of various run buffers for chiral capillary electrophoresis using chiral crown ether as a chiral selector

In the capillary electrophoretic separation of primary amine enantiomers using (+)-(18-crown-6)-tetracarboxylic acid (18C6H4) as a chiral selector, the presence of run buffer constituents such as tris(hydroxymethyl)aminomethane (Tris) or Na+ competing with analytes for 18C6H4, diminishes the effectiveness of 18C6H4. In order to determine appropriate buffer systems for 18C6H4, various run buffer cationic components including Tris, 1,3-bis[tris(hydroxymethyl)methylamino]propane, bis(2-hydroxyethyl)iminotris(hydroxymethyl)methane, triethanolamine, tetramethylammonium, and Na+ were compared. Quantitative studies of the effects of the competitive constituents were carried out by measuring the electrophoretic mobilities of histidine as a function of the 18C6H4 concentration. We also derived a simple equation to estimate the optimal chiral selector concentration for a maximum mobility difference in the presence of a competitive inhibitor.     

Fabrication of solid thin film electrolyte and LiCoO2 by aerosol flame pyrolysis deposition

Aerosol flame pyrolysis deposition method was applied to deposit the oxide glass electrolyte film and LiCoO₂ cathode for thin film type Li-ion secondary battery. The thicknesses of as-deposited porous LiCoO₂ and Li₂O–B₂O₃–P₂O₅ electrolyte film were about 6 μm and 15 μm, respectively. The deposited LiCoO₂ was sintered for 2 min at 700 °C to make partially densified cathode layer, and the deposited Li₂O–P₂O₅–B₂O₃ glass film completely densified by the sintering at 700 °C for 1 h. After solid state sintering process the thicknesses were reduced to approximately 4 μm and 6 μm, respectively. The cathode and electrolyte layers were deposited by continuous deposition process and integrated into a layer by co-sintering. It was demonstrated that Aerosol flame deposition is one of the good candidates for the fabrication of thin film battery.     

The C-H activation of methane by laser-ablated zirconium atoms: CH2=ZrH2, the simplest carbene hydride complex, agostic bonding, and (CH3)2ZrH2

Reaction of laser-ablated Zr with CH(4) ((13)CH(4), CD(4), and CH(2)D(2)) in excess neon during condensation at 5 K forms CH(2)=ZrH(2), the simplest alkylidene hydride complex, which is identified by infrared absorptions at 1581.0, 1546.2, 757.0, and 634.5 cm(-)(1). Density functional theory electronic structure calculations using a large basis set with polarization functions predict a C(1) symmetry structure with agostic C-H- - -Zr bonding and distance of 2.300 A. Identification of the agostic CH(2)=ZrH(2) methylidene complex is confirmed by an excellent match of calculated and observed isotopic frequencies particularly for the four unique CHD=ZrHD isotopic modifications. The analogous reactions in excess argon give two persistent photoreversible matrix configurations for CH(2)=ZrH(2). Finally, methane activation by CH(2)=ZrH(2) gives the new (CH(3))(2)ZrH(2) molecule.     

Studies on the Complexes of N,N′-Bis[o-(diphenylphosphino)benzylidene]ethylenediamine with Transition Metal Ions

The thermodynamic parameters for the interaction of Cu²⁺, Ni²⁺, Co²⁺, Cd²⁺, andAg⁺ with the new title ligand have been determined by titration calorimetry in 50% THF–methanol (V/V) at 25 °C.Ag⁺ exhibited remarkably higher complexation selectivity.Ag⁺ and several transition metal ions have been transportedusing this ligand as carrier in a bulk liquid membrane. CompetitiveAg⁺–M²⁺ transport studies have also beencarried out for the same system. In this membrane transport study, high transport of Ag⁺ was observed in both single and competitiveAg⁺–M²⁺ transport studies. The complexformation of N,N-bis[o-(diphenylphosphino)benzylidene]ethylenediamine (P₂N₂) with silver,[Ag(P₂N₂)] (NO₃), (1) is reported. Complex 1 has been characterized by X-ray crystallography. 1 ismonoclinic, space group P2_1/n (No. 14), with cell dimensionsa = 13.398(4) , b=12.577(5) , c = 21.521(4) , =100.14(2) , V = 3570(2) ³ and Z = 4.     

Determination of Levofloxacin in Human Urine with Capillary Electrophoresis and Fluorescence Detector

In this study, we developed an analytical method for the enantioseparation of ofloxacin, using capillary electrophoresis with fluorescence detection. The optimum background electrolyte was obtained to be 60 mM hydroxylpropyl‐β‐cyclodextrin (HP‐β‐CD) in 50 mM phosphate buffer at pH 2.30. Under these conditions, the (+) and (‐) ofloxacin were completely separated, with the detection limit of 10 nM when the sample was prepared in deionized water. The linear ranges of levofloxacin in deionized water and untreated urine were 10^?7 to 5 × 10^?3 M with R² = 0.9989 and 5 × 10^?6to 5 × 10^?3 M with R² = 0.9943, respectively. We also applied this method to investigate the purity of a commercial drug. The results revealed that the ratio between (+)‐ofloxacin and (‐)‐ofloxacin (levofloxacin) was 99.9:0.1, and there is about 93 mg levofloxacin per tablet (200 mg). The concentration of levofloxacin in patient's urine was founded to be 7.9 × 10^?4M, and the ratio between the two optical isomers was 99.3:0.7.