High-throughput screening of fuel cell electrocatalysts

The drawbacks of our earlier report of preparing fuel cell catalyst arrays by borohydride reduction of inkjet prepared arrays of metal salts are discussed along with the need for inclusion of state-of-the-art metrics in all array screening. An alternative method for screening of hydrogen/air cathode catalysts, direct methanol fuel cell (DMFC) anode catalysts, and catalyst loading studies is provided. State-of-the-art Johnson Matthey catalysts were used in control experiments to demonstrate the utility of the array fuel cell for high throughput screening of fuel cell catalysts in the 3-4 mg/cm² range. This report lays out hard learned rules for high throughput screening and demonstrates that the array fuel cell can be used for very precise screening of libraries of membrane electrode assembly (MEA) components without the pitfalls discussed in the introduction.     

Magnetic and electrical transport properties of delta-doped amorphous Ge:Mn magnetic semiconductors

We report on the growth and characterization of delta-doped amorphous Ge:Mn diluted magnetic semiconductor thin films on GaAs (0 0 1) substrates. The fabricated samples exhibit different magnetic behaviors, depending on the Mn doping concentration. The Curie temperature was found to be dependent on both the Mn doping concentration and spacing between the doping layers. A sharp drop in magnetization and rise in resistivity are observed at low temperature in samples with high Mn doping concentrations, which is also accompanied by a negative thermal remanent magnetization (TRM) in the higher temperature range. The temperature at which the magnetization starts to drop and the negative TRM appears show a correlation with the Mn doping concentration. The experimental results are discussed based on the formation of ferromagnetic regions at high temperature and antiferromagnetic coupling between these regions at low temperature.     

Evaluation of gap length fluctuation with harmonic analysis method

Gap length (GL) of reading head is one of the most critical parameters for high-density magnetic recording systems. A novel method is proposed for quantitative evaluation of the GL fluctuation among a batch of magneto-resistive/giant magneto-resistive heads with same structure design. The method works at head-gimbal assembly level and the evaluation can be done with any read/write analysis equipment. The testing process is based on harmonic analysis of the readback signal. The testing system consists of a selected reference head and sample heads for evaluation. A GL variation function is introduced for the evaluation of GL deviation between the reference head and sample head. This method proved to be easy for implementation and results suggest that variation of GL is considerable and has obvious effect on recording performance in high recording density systems.     

Micromagnetic analysis of transition noise for high-density perpendicular recording

In this paper, specific issues related to high-density perpendicular magnetic recording processes, such as transition noise properties and cross-track correlation lengths, were investigated with the help of micromagnetic analysis. The effects of media parameters were taken into consideration, including intergranular exchange coupling, and exchange distribution, irregular grain shapes, magnetization saturation distribution, and anisotropy distribution. The micromagnetic simulation results showed that the effect of anisotropy distribution on transition noise is more significant than magnetization saturation distribution, and it is crucial to reduce this effect to achieve a high signal-to-noise ratio. Additionally, a new method to further estimate the partial erasure threshold was proposed to approximate the partial erasure effects, and the relation between the microtrack jitter and total track jitter was investigated.     

Engineering issue study of triple harmonic method for in situ flying height analysis

In situ flying height testing technology is becoming more and more important in slider–disk interaction analysis and manufacturing quality control of disk drives and head-related components. Triple harmonic method is a quite promising choice for in situ flying height analysis, compared with other in situ methods reported up to now. This paper reports results of investigations on engineering issues of applying triple harmonic method for in situ flying height analysis. The paper reports results of analysis on the effects of various testing conditions on flying height testing repeatability and accuracy. Results suggest that working at reasonable high channel density and working on the ratio between third and first harmonics will be an advantage in terms of both flying height testing sensitivity and testing repeatability. Comparing with media thickness effect, the gap-length variation among different heads will be important if it is to study flying height difference among different heads and the testing is at high channel density. Also, it is suggested to work at AC erased track, in order to reduce the non-linearity caused by hard transition.     

Magneto resistance due to domain wall scattering and magneto size effect of thin Ni and Co films at low temperatures

Nickel and cobalt films illustrate alternative Bloch lines with cap switches. The strip magnetic domains become zigzag and bubbling cells for Ni and Co films, respectively, under an external field of 1.5 T. The magnetoresistances (MR) for currents parallel (CIW) to the domain walls is 15% less than those of the perpendicular (CPW) case. We also studied the magneto size effect by applying the magnetic field normal to the surface, from which the Sondheimer oscillation appears attributing to periodic striking of the surface for electrons traveling in circular motion on a plane canting to the surface. The experiments can be expressed by the magneto size effect inherited with very small specularity parameters.     

Theoretical investigation of magnetic property in paramagnetic neodymium gallium garnet under high magnetic field

The magnetic property in neodymium gallium garnet (NdGaG) is studied by the quantum theory. The ground configuration split states are calculated taking into account the spin–orbit interaction and crystal field effect. Taking account of the Nd–Nd exchange interaction, a good agreement between experimental and theoretical values can be obtained for the variation of the magnetic moment with the external magnetic field under “extreme” conditions (low temperature and high magnetic field). Moreover, the temperature dependence of magnetic moment and the magnetic susceptibility χ is also discussed. Above 30 K, the magnetization (M) shows a linear field (H_e) dependence.     

Sensing and fluorescence behaviors of complex formation between new lariat crown ethers bearing fluorescence sidearm and metal ions in methanol solution

Fluorescence spectroscopic properties of the complex formation between six new C-pivot16-crown-5 ethers bearing fluorescence side arms and metal ions are studied. Six new C-pivot 16-crown-5 ethers that carry fluorescence side arms were synthesized. The research also included the examination of different fluorescent behavior of the new lariat ethers in the presence of silver and sodium ions (Ag⁺ and Na⁺) in methanol. Because of the good fit of the cavity size of these 16-crown-5 ethers with the Ag⁺ and Na⁺ ions, remarkable change in fluorescent spectra were observed. The results showed that the new lariat crown ethers exhibited enhanced selectivity towards sodium ion, but silver ion show quenching abilities towards the ligands. Cooperative participations of the C-pivot side arm oxygen with the ring oxygen molecules in complexation was also confirmed by the single crystal X-ray crystallography of the complex, (C₂₇H₃₀O₇)·NaClO₄. The freezing of crown ring conformation and the diminishment of the chance of sidearm oscillation that occurred upon complexation with sodium ion are the main causes of fluorescent enhancement. The quenching caused by the addition of silver ion was found to explainable by the photo-induced electron transfer that results in the reduction of silver ions.     

Preparation, characterization and photocatalytic activity of polycrystalline Bi2O3/SrTiO3 composite powders

Bi₂O₃/SrTiO₃ composite powders have been prepared and their photocatalytic activities were investigated by photooxidation of methanol. These powders were characterized by UV-Visible diffuse reflectance spectra, SEM and X-ray diffraction (XRD). The results revealed that all the Bi₂O₃/SrTiO₃ composite powders exhibited higher photocatalytic activity than pure SrTiO₃, Bi₂O₃ and TiO₂ (P25) under visible light irradiation (λ>440 nm). The effects of the Bi₂O₃ contents on the photocatalytic activities of the composite powders were examined, the photocatalytic activities increased with the content of Bi₂O₃ increasing to a maximum of 83% and then decreased under visible light irradiation. The effects of the calcination temperatures on the photocatalytic activities of the composite powders were also investigated.     

Rotation-invariant pattern recognition using morphological phase-only correlation

We present a rotation-invariant nonlinear correlator based on the circular harmonic filter (CHF) and the previously proposed morphological phase-only correlator (MPC) [Q. Wang, S. Liu, Opt. Commun. 244 (2005) 93]. We refer to this correlator as a rotation-invariant MPC (RIMPC). Through computer simulation, we compare the output results of RIMPC with those of rotation-invariant MC (RIMC) and CHF when input scene is corrupted by salt-and-pepper noise, white additive Gaussian noise and cluttered background. Our results show that RIMPC yields higher discriminability, sharper and higher correlation peaks and displays better stability against the above three kinds of noise than do the RIMC and common CHF.