THE STRUCTURAL BASIS OF THE POOR FIBRIN SPECIFICITY OF UROKINASE(Ⅰ)——KNOWLEDGE-BASED PREDICTION OF KRINGLE STRUCTURES OF UROKINASE AND ITS RELATED PROTEINS

The Kringle-1 structure of plasminogen (PGK-1), the Kringle-2 structure of tissue plasminogen activator (PAK-2) and the Kringle structure of prourokinase (UKK) has been modeled on the basis of the three-dimensional structure of Kringle-1 of prothrombin (PTK-1) at 2.8 resolution. The predicted three-dimensional structure of these Kringles shows that the binding site of PGK-1 is characterized by an apparent dipolar site, the polar parts of which are separated by a hydrophobic region. PAK-2 possesses the anionic center but has not a cationic binding center which might be provided by a guanidinium group from Arg-69 located adjacent to the Arg-71 position. UKK possesses neither the anionic binding center nor the cationic center which are probably the main reason for the poor fibrin specificity of urokinase.     

A Facile Three-Component One-Pot Synthesis of Structurally Constrained Tetrahydrofurans, Which Are t-RNA Synthetase Inhibitor Analogues

A one-pot procedure for the efficient synthesis of a small library of t-RNA inhibitor analogues was developed. Thus,Rh2(OAc)4 catalyzed three-component 1,3-dipolar cycloaddition reactions of carbonyl ylides derived from diazoindan-1,3-dione and aldehydes with other dipolarophiles in 1,1,2,2-tetrachloroethane at 80 ℃ gave ring fused tetrahydrofurans having three stereocenters in good yield.     

FRICTIONAL DISSIPATION AND NONLINEAR BAROTROPIC INSTABILITY

Based on the nonlinear quasi-geostrophic barotropic vorticity equation with Ekman friction, the criteria for nonlinear barotropic stability of the zonal basic flows are derived using Serrin-Joseph energy approach and through total energy, total enstrophy and their linear combination, separately, in terms of variational principle. Since the new transformation for Euler equation is utilized, the estimation of eigenvalue is more accurate, and the previous results of the author are improved very well.     

激光窗口热效应和应力双折射的分析

 分析了平板窗口在激光加热和内外压强差作用下对光束带来的附加相移，详细讨论了应力双折射部分的相移，计算了CaF₂窗口的温升、应力、附加相移、远场Strehl比和退偏度等的分布。结果表明：窗口变形和折射率随温度变化是产生附加相移的主要原因，窗口的非均匀温升将导致光束质量下降，应力双折射部分的相移与窗口表面Miller指数有关，对入射光产生一定的退偏效应，从而影响光束质量。     

主客观相结合眼波面像差分析系统

利用Hartmann-Shack波面传感器对眼出瞳位置的波面像差进行测量,根据所测像差控制可变形镜对像差进行实时补偿.眼像差以Zernike多项式表示,通过对可变形镜的精确控制,可在光路中生成特定模式和幅值的像差.因此,被测者根据视觉的主观感觉,调节视标像差,直至获得最满意的视觉效果.该系统采用移动三棱镜和柱镜的方法对离焦和散光进行预补偿,弥补了波面传感器测量范围和可变形镜矫正范围受限制的缺点.该系统把快速、客观的测量及补偿和主观调整相结合,更加符合人眼工作的特性,可用于在人眼像差与视觉分辩的基础和临床研究.     

反馈调节的局部正则化鲁棒光流估计

提出了一种引入反馈调节机制的新局部鲁棒光流场计算思想.该思想结合局部法和全局法的特点,首先划分整场为有公共边界的子块,定义距离来判断每个点的子块归属,然后在每个子块内进行光流约束和平滑约束正则化的优化计算.将光流约束中的光强残差作为控制参量,衡量光流准确度的峰值信噪比作为输出,经反馈处理,调节控制参量使光流估计准确度趋向最优.实验结果表明,这种新的结合反馈调节机制局部光流场计算法能使光流准确度获得提升.     

气溶胶前向散射大气能见度测量系统传递系数的标定及校准方法

分析了气溶胶的前向角散射特性,利用标准的大气透射仪标定前向散射大气能见度测量系统的传递系数。当系统结构发生变化时,传递系数也随之改变,为保证系统测量的准确性和简化系统传递系数的标定过程,提出了一种利用标准漫透射板校准系统传递系数的方法。该方法使用了两块具有相同透射系数的漫透射板,使气溶胶粒子团在前向半球上产生漫散射,此时探测器的测量值即为包含了仪器常数的定值。当系统结构改变时,这个测量值相对于原测量值的变化率作为比例系数代入系统传递系数的计算,实现校准。     

空间摄像机的热设计

根据空间摄像机的所处空间环境和结构特点,对其进行了热设计.采用被动热控措施进行热隔离和热疏导,充分利用了摄像机所搭载的卫星平台的热容;采用主动热控措施进行温差补偿,将温度拉平至热控指标范围之内.根据所采用的热控措施,针对空间摄像机进行了仿真分析,得到了满意的结果.     

Small World Effects in a Harmonious Unifying Hybrid Preferential Model Networks

Small world effects in the harmonious unifying hybrid preferential model (HUHPM) networks are studied both numerically and analytically. The idea and method of the HUHPM is applied to three typical examples of unweighted BA model, weighted BBV model, and the TDE model, so-called HUHPM-BA, HUHPM-BBV and HUHPM-TDE networks. Comparing the HUHPM with current typical models above, it is found that the HUHPM networks has the smallest average path length and the biggest average clustering coefficient. The results demonstrate that the HUHPM is more suitable not only for the un-weighted models but also for the weighted models.     

具有数据丢失的网络化控制系统的基于观测器的镇定

研究具有数据丢失的网络化控制系统的基于观测器的镇定问题。受控对象是由T-S模糊模型描述的非线性时滞系统。把数据丢失过程建模成独立同分布过程。利用模糊Lyapunov函数方法得到了闭环系统随机稳定的充分条件,其基于观测器的反馈控制器可通过求解一组线性矩阵不等式来设计。一个仿真例子说明方法的有效性。