超临界二氧化碳偶合超声预处理强化玉米秸秆酶水解(英)

提出了一个木质纤维素生物质预处理的全绿色加工过程.以玉米秸秆和玉米芯为原料,以超临界CO₂和超声偶合法对木质纤维素进行预处理.超临界CO₂预处理条件为:压力15-25 MPa,温度120₁70℃,含水量50%,反应时间0.5₄ h.超声场功率600W,温度80℃,作用时间2-8 h.用纤维素酶水解反应获得的还原糖总量来评价预处理效果.结果表明,单纯超临界CO₂和超临界CO₂偶合超声预处理都能够提高生物质水解反应还原糖产量.对于玉米芯,超临界CO₂预处理（170℃,20 MPa,3 0min）后,还原糖产率为62%（未预处理的为12%）.对于玉米秸秆（170℃,20 MPa,2.5 h）,还原糖产率为46.4%.对于玉米芯,超临界CO₂偶合超声预处理（600 W,80℃下超声处理6 h,然后用170℃,20 MPa超临界CO₂预处理30 min）后,还原糖产率为87%.对于玉米秸秆,超临界CO₂偶合超声预处理（600 W,80℃下超声处理8 h,然后用170℃,20 MPa超临界CO₂预处理1 h）后,还原糖产率为25.5%.与未处理生物质相比,X射线衍射结果表明玉米秸秆和玉米芯在超临界CO₂和超声预处理后其结晶度没有明显变化.扫描电镜分析则发现木质纤维素的表面积显著增加.     

Iron-mediated AGET ATRP of styrene and methyl methacrylate using ascorbic acid sodium salt as reducing agent

Atom transfer radical polymerization of styrene(St) and methyl methacrylate(MMA) in bulk and in different solvents using activators generated by electron transfer(AGET ATRP) were investigated in the presence of a limited amount of air using FeCl3·6H2O as the catalyst, ascorbic acid sodium salt(AsAc-Na) as the reducing agent, and a cheap and commercially available tetrabutylammonium bromide(TBABr) as the ligand. It was found that polymerization in THF resulted in shorter induction period than that in bulk and in toluene for AGET ATRP of St, while referring to AGET ATRP of MMA, polymerization in THF showed three advantages compared with that in bulk and toluene: 1) shortening the induction period, 2) enhancing the polymerization rate and 3) having better controllability. The living features of the obtained polymers were verified by chain end analysis and chain-extension experiments.     

Validation of a Reference Gene (BdFIM) for Quantifying Transgene Copy Numbers in Brachypodium distachyon by Real-Time PCR

Brachypodium distachyon has been proposed as a new model system for gramineous plants with a sequenced genome and an efficient transformation system. Many transgenic B. distachyon plants have been generated in recent years. To develop a reliable fast method for detecting transgenic B. distachyon and quantifying its transgene copy numbers, a species-specific reference gene is of great priority to be validated both in qualitative PCR and quantitative real-time PCR detection. In this study, we first proved that the BdFIM (B. distachyon fimbrin-like protein) gene is a suitable reference gene in qualitative PCR and quantitative real-time PCR for B. distachyon. Fourteen different B. distachyon varieties were tested by both qualitative and quantitative PCRs, and identical amplification products of BdFIM were obtained with all of them, while no amplification products were observed with samples from 14 other plant species, suggesting that BdFIM gene was specific to B. distachyon. The results of Southern blot analysis revealed that the BdFIM gene was low copy number in seven tested B. distachyon varieties. In conclusion, the BdFIM gene can be used as a reference gene, since it had species specificity, low heterogeneity, and low copy number among the tested B. distachyon varieties. Furthermore, the copy number of inserted sequences from transgenic B. distachyon obtained by real-time PCR methods and Southern blot confirmed that the BdFIM gene was an applicable reference gene in B. distachyon.     

Conductometric and fluorescence probe investigations of molecular interactions between dodecyltrimethylammonium bromide and dipeptides

The effect of five dipeptides (glycylglycine, glycyl-l-valine, glycyl-l-leucine, glycyl-l-glutamine, and l-alanyl-l-glutamine) on the micellar properties of catonic surfactant dodecyltrimethylammonium bromide (DTAB) has been investigated by electrical conductivity and fluorescence spectroscopy. From the conductivity data, the critical micellar concentration (c _cmc), counterion binding constant (β), and thermodynamic parameters of micellization (ΔG _m ^o , ΔH _m ^o and ΔS _m ^o ) have been calculated. The effect of dipeptides on the micellar properties of DTAB depends upon their nature and concentration as well as on temperature and has been used to study the interactions present in the micellar systems. Enthalpy–entropy compensation effect has also been observed. The pyrene fluorescence spectra were used as an index for the estimation of micropolarity of micellar produced by the interaction of DTAB with dipeptides and the aggregation behavior of DTAB. Comparison on the interactions between different types of surfactants and dipeptide showed that the order of the strength for these interactions is TX-100?相似文献   

Nephrotoxicity assessments of benzo(a)pyrene during zebrafish embryogenesis

Benzo(a)pyrene is a chemical produced during the process of making fried, roasted, and smoked foods. It remains unclear whether benzo(a)pyrene affects the early development of human organs. In this study, we used the transgenic zebrafish line Tg(wt1b:GFP) as a model to assess benzo(a)pyrene-induced kidney malformation. By soaking zebrafish embryos in benzo(a)pyrene at various doses (2, 20, and 200 ppb), only a minor effect on the survival rate was detected (0 ppb: 97.8 ± 1.9 %; 2–200 ppb: 89.1 ± 5.8–91.5 ± 8.3 %). However, benzo(a)pyrene significantly affected the development of the kidney (malformation rates ranges from 50.0 ± 3.5 to 77.4 ± 5.3 %). Various abnormalities, such as unusual curving of pronephric tubes, swollen glomerulus, and incomplete development of pronephric ducts, were observed. This study provides a rapid and effective protocol for the evaluation of the notable effects of benzo(a)pyrene on embryonic kidney development.     

离子液体在锂离子电池中的应用研究进展

离子液体具有蒸汽压低、热稳定性好、不易挥发、溶解能力强、环境友好、电化学稳定窗口和液程范围宽等优点,在锂离子电池领域应用前景广泛。本文按照离子液体作为电解质溶剂、与传统电解质复配或与聚合物电解质结合的应用方式,总结其对电池的安全性和热稳定性的影响,并综述了近年来离子液体在锂离子电池电解质中的应用研究进展。     

Preparation of novel magnetic fluorescent microspheres from copperas and fluorescence enhancement with zinc ions

The aim of this study is to develop a new method for the preparation of Fe₃O₄@SiO₂–An NPs from copperas. The core–shell structures of the nanoparticles and chemical composition have been confirmed by TEM, XRD and FTIR techniques. Fluorescence Enhancement of Fe₃O₄@SiO₂–An NPs with zinc ions was investigated by fluorescence emission spectra. The results indicated that the Fe₃O₄ NPs with a high purity (Total Fe 72.16 %) were obtained from copperas by chemical co-precipitation method and have a uniform spherical morphology with an average diameter of about 10 nm. The Fe₃O₄ NPs coated with silica nanoparticles were prepared, and an attempt had been made that the Fe₃O₄@SiO₂ NPs were modified by 3-aminopropyltriethoxysilane and 9-anthranone successively. The recommended mole ratio of ethanol to water and the content of ammonia water added were 4:1 and 25 wt% respectively, which have an obviously effect on the combination of the final well-ordered MNPs with the amino functionalities and reactant components. The functionalized Fe₃O₄@SiO₂–An NPs have a fluorescence property and this fluorescence effect can be enhanced with the Zn²⁺ ions attachment. Meanwhile, the saturated magnetization of Fe₃O₄@SiO₂–An NPs was 37.8 emug^?1 at 25 °C and this fluorescent material exhibited excellent magnetic properties. A new way was therefore provided for the comprehensive utilization of the unmarketable copperas. Moreover, the functionalized Fe₃O₄@SiO₂–An NPs have a big potential in environmental decontamination, medical technology and biological science.     

The oxygen sensitive properties of (LaBa)Co2O5+δ thin films fabricated by polymer-assisted deposition technique

(LaBa)Co₂O_5+δ (LBCO) thin films were successfully fabricated on Si (001) substrates by polymer-assisted deposition method. Microstructures were examined by X-ray diffraction technique, which confirmed the films were a single phase, pseudo cubic structure. The electrical transport properties of the films were investigated by the temperature dependence of films resistance, which suggested that LBCO films have typical semiconductor properties. After circle tests, the oxygen–hydrogen response rate did not show obvious variation in the specific temperature environment of 580 °C. This demonstrates that the LBCO thin films have a superior stability in both oxygen and hydrogen (6 % H₂, 94 % N₂) environment. Simultaneously, the drastic changes of films resistance (from ~10⁶ to ~10² Ω) with the switch of redox (O₂–H₂) environment within such a short time (~2.2 s) indicated that LBCO films have an excellent oxygen sensitive property and extraordinary fast surface exchange rate.     

Ternary Sn-Ti-O Electrocatalyst Boosts the Stability and Energy Efficiency of CO2 Reduction

Simultaneously improving energy efficiency (EE) and material stability in electrochemical CO₂ conversion remains an unsolved challenge. Among a series of ternary Sn-Ti-O electrocatalysts, 3D ordered mesoporous (3DOM) Sn_0.3Ti_0.7O₂ achieves a trade-off between active-site exposure and structural stability, demonstrating up to 71.5 % half-cell EE over 200 hours, and a 94.5 % Faradaic efficiency for CO at an overpotential as low as 430 mV. DFT and X-ray absorption fine structure analyses reveal an electron density reconfiguration in the Sn-Ti-O system. A downshift of the orbital band center of Sn and a charge depletion of Ti collectively facilitate the dissociative adsorption of the desired intermediate COOH* for CO formation. It is also beneficial in maintaining a local alkaline environment to suppress H₂ and formate formation, and in stabilizing oxygen atoms to prolong durability. These findings provide a new strategy in materials design for efficient CO₂ conversion and beyond.     

Sequence-Dependent DNA Functionalization of Upconversion Nanoparticles and Their Programmable Assemblies

DNA-modified lanthanide-doped upconversion nanoparticles (DNA-UCNPs) that combine the functions of DNA and the optical features of UCNPs have shown great promise in a wide range of fields. However, challenges remain in precisely tethering and orienting the DNA strands on the UCNP surface. Herein, we systematically investigate the sequence dependence of DNAs in their interactions with UCNPs, and reveal that poly-cytosine (poly-C) has high affinity for the UCNP surface. A general approach to synthesize monodispersed DNA-UCNP conjugates is developed using poly-C-containing diblock DNA strands. The poly-C segment of the DNA strand binds to the surfaces of UCNPs and the second segment is oriented perpendicularly on the UCNP surface, making the DNA-UCNPs highly stable and monodispersed in aqueous solution. The dense layer of DNA on the UCNP surface enables the programmable assembly of UCNPs with other DNA-functionalized nanoparticles or DNA origamis through hybridization, resulting in the formation of well-organized complex structures.