Recombinant Expression and Characterization of an Organic-Solvent-Tolerant α-Amylase from Exiguobacterium sp. DAU5

The enzyme from halophilic microorganisms often has unique properties such as organic-solvent-tolerance. In this study, a novel organic-solvent-tolerant α-amylase gene was cloned from the mild halophile Exiguobacterium sp. DAU5. The open reading frame (ORF) of the enzyme consisted of 1,545 bp and encoded 514 amino acids, the primary sequence revealed that it belongs to the glycoside hydrolase (GH) family 13. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) showed an AmyH monomer of 57 kDa. The enzyme exhibited maximal activity at 40 °C in pH?8.5 glycine–NaOH buffer, and the activity was strongly inhibited by Zn²⁺, Cu²⁺, and Fe²⁺. The α-amylase AmyH exhibited high hydrolysis activity toward soluble starch, and the major hydrolysis products were maltose, maltotriose, and maltopentaose; the AmyH could not efficiently hydrolyze oligosaccharides smaller than maltoheptaose, nor could it act on the β-1,4 or α-1,6 glucosidic bonds in xylan or pullulan, respectively. In addition, the α-amylase exhibited better tolerance to organic solvents, as it was stable in the presence of dimethylsulfoxide (DMSO), methanol, ethanol, and acetone. Base on all of these results, the enzyme could be useful for practical application in the bakery industry and in biotechnological processes that occur in the presence of organic solvents.     

Facile synthesis of gemini surface-active ATRP initiator and its use in soap-free AGET ATRP mini-emulsion polymerisation

A novel cationic gemini surfactant has been readily synthesised in 70 % total yield. The functional gemini surfactant can act both as an emulsifier and an atom transfer radical polymerisation (ATRP) initiator in mini-emulsion polymerisation of methyl methacrylate (MMA), in which no other emulsifier was required. 1-(Dimethylamino)dodecane (N,N-dimethyldodecylamine, DMDA) was found to be a good ligand in the activator generated by electron transfer (AGET) ATRP reaction. Kinetic studies indicated that the polymerisation featured controlled/living radical polymerisation.     

辉光放电电解等离子体引发合成高吸水性树脂

以淀粉、丙烯酸和腐殖酸钠为原料,以N,N-亚甲基双丙烯酰胺为交联剂,采用辉光放电电解等离子体在水溶液中引发聚合制备淀粉-聚丙烯酸/腐殖酸钠复合高吸水树脂。考察了放电电压、放电时间,单体与淀粉质量比、腐殖酸钠含量、交联剂、温度及中和度对树脂吸水率的影响。用红外光谱和热重分析分别对树脂进行了结构表征和稳定性测试,结果表明,在优化合成条件下,所得的复合树脂具有较高的吸水性和耐盐性,常温下对蒸馏水吸收量为862g/g,对0.9%NaCl溶液的吸收量为69g/g。     

Determination of Cr(VI) by portable tungsten coil electrothermal atomic absorption spectrometer after surfactant-assisted dispersive liquid-liquid microextraction

As a new developed instrument, a portable tungsten coil electrothermal atomic absorption spectrometer (W-coil ET-AAS) was first coupled with surfactant assisted dispersive liquid–liquid microextraction (SA-DLLME) to improve its analytical performance and expand its applications in this work. SA-DLLME was very simple, rapid and the extraction efficiency was considerably improved by the effect of surfactant, which was suitable to be coupled with the portable instrument in field analysis. After SA-DLLME, concentrated chromium in organic phase was directly determined on W-coil atomiser. The influence factors relevant to SA-DLLME and instrumental conditions were studied systematically. Under the optimal conditions, the limit of detection (LOD) for Cr(VI) was 0.016 µg L^?1, with sensitivity enhancement factor (EF) of 107. The relative standard deviation (RSD) for seven replicate measurements of 0.5 µg L^?1 of Cr(VI) was 4.6%. The recoveries for the spiked samples were in the acceptable range of 96.8–104%. The rapid, simple and high effective method greatly improved the sensitivity of this portable spectrometer for the determination of Cr(VI) and was applied to the analysis of ultra-trace Cr(VI) in real and certified water samples with satisfactory results.     

Biomimetic synthesis of calcium carbonate with different morphologies under the direction of different amino acids

Using three different amino acids (AAs) as organic matrices, including the highly nonpolar hydrophobic l-valine, the positively charged l-arginine and the less polar uncharged l-serine, calcium carbonate (CaCO₃) with different morphologies and polymorphs were synthesized by a facile gas diffusion reaction based on biomimetic strategy. Compared with the control cubic calcite obtained in the absence of AAs, the product from l-valine was cubic calcite aggregates assembled by nano-platelets. The product from l-arginine was spherical vaterite aggregates assembled by spherical nanoparticles. The product from l-serine was the mixture of cubic calcite and spherical vaterite. The structures and properties of the side chains of the AAs exerted the significant effects on the nucleation and growth of the CaCO₃. The formation mechanisms of the CaCO₃ in the presence of AAs are preliminarily discussed. The results suggest that the polymorphs and morphologies of the inorganic nanomaterials might be easily adjusted through the careful selection of the organic matrices.     

Preparation and photocatalytic antibacterial property of nitrogen doped TiO2 nanoparticles

Nitrogen doped TiO₂ (N-TiO₂) nanoparticles with about 30 nm in size were produced by a sol–gel method and characterized respectively by UV–vis, X-ray diffraction (XRD), Transmission electron microscopy, X-ray photoelectron spectroscopy (XPS). Their photocatalytic antibacterial properties were evaluated by the antibacterial ratio against Escherichia coli in dark and under simulated sunlight respectively. The XRD pattern showed that the doped nano-TiO₂ was mainly composed of anatase phase. The XPS spectra of the N-TiO₂ sample indicated that TiO₂ was doped by nitrogen atom. The nitrogen doping created a new N 2p state slightly above the valence band top consists of O 2p state, and this pushes up the valence band top and decreased the band gap. Which leaded to the absorption edge was red-shifted to the visible light region of UV–vis spectra of nitrogen doped nano-TiO₂ comparing with pure nano-TiO₂. The antibacterial percentage of N-TiO₂ against E. coli reached to 90 % under simulated sunlight for 2 h, which was much better than that in dark, also than that of pure nano-TiO₂. The photo-catalytic antibacterial activity was activated under visible light. The structure and integrity of cell wall and cell membrane were destructed, and even caused the bacteria death.     

Synthesis of amine-modified mesoporous materials for CO2 capture by a one-pot template-free method

A one-pot template-free route was developed for the synthesis of novel tetraethylenepentamine modified porous silica as CO₂ adsorbents, the obtained materials were characterized by N₂ adsorption/desorption, thermogravimetry, elemental analysis, Fourier transform infrared spectrometry,scanning electron microscopy and transmission electron microscopy. It was found that the amine species were inserted into the silica skeleton, which considerably enhanced their dispersion. Compared with similar materials derived from impregnation, the porous structure of the silica can be better reserved, leading to a promising CO₂ adsorption capacity of 3.98 mmol CO₂/g-adsorbent and a fast adsorption kinetic in simulated flue gas at 348 K. The resulted adsorbents could also be easily regenerated and showed a good durability in multiple adsorption–desorption cycles. All these features make this method a promising option for the preparation of CO₂ adsorbents.     

The preparation and characterization graphene-cross-linked phenol–formaldehyde hybrid carbon xerogels

A new synthesis route based on polycondensation of phenol and formaldehyde cross-linked by graphene oxide (GO) was developed. Wet gel after gelation was converted into an organic xerogel by ambient pressure drying to obtain GO-cross-linked phenol–formaldehyde (PF) organic xerogels (GOCPFOX). Graphene-cross-linked PF carbon xerogels (GCPFCX) were produced by carbonization. The morphology and chemical structure of GOCPFOX and GCPFCX were analyzed. The electrochemical behavior of GCPFCX as an electrode material in electric double-layer capacitors (EDLCs) was investigated. Results show that the high mechanical strength of GO increased the gel skeleton strength; thus, organic xerogels exhibit very low drying shrinkage. Scanning electron micrographs indicated that addition of GO altered the gel structure. Thus, when GO was added into the PF solution, the PF molecular chains were anchored on the surface of GO by chemical and physical interaction. The GCPFCX-10 sample achieved the highest specific surface area, mesoporous volume, and specific capacity with 378 m²/g, 0.56 cm³/g, and 116 F/g, respectively. Hence, GCPFCX is a potential material for EDLCs owing to its low production cost and ability to avoid supercritical drying.     

Excellent degradation performance of azo dye by metallic glass/titanium dioxide composite powders

The metallic glass/titanium dioxide powders (MG/TiO₂) with enhanced photocatalytic oxidation activity were synthesized, which exhibit a higher efficiency in decolorizing methylene blue solutions (MB). Compared with the pure TiO₂ and crystalline alloy/TiO₂ (CA/TiO₂) under the same circumstances, its degradation rate was 60 % and 30 % higher, respectively. Furthermore, compared with the CA/TiO₂, the MG/TiO₂ photocatalytic rate was three times faster when decolorizing MB. Considering the excellent intrinsic high-performance photocatalytic degradation under visible light irradiation, these novel powders were proven to have potential applications in water purification industry.