Thermoplastic polyurethanes containing 12-hydroxymethylabietanol

Thermoplastic polyurethane elastomers incorporating the resin acid-derived 12-hydroxymethylabietanol (12-HMA) were prepared, and some physical properties are reported. A polyester macroglycol was prepared from 12-HMA, adipic acid, and ethylene glycol. This macroglycol then was combined with either poly(tetramethylene adipate) glycol (PTAd) or poly(ethylene adipate) glycol (PEAd) and 1,4-butanediol to give a glycol blend of 300 average hydroxyl equivalent weight (OHE). The glycol mixture then was combined with diphenylmethane 4,4′-diisocyanate (MDI) (NCO/OH = 1.0) to give urethane polymers soluble in tetrahydrofuran. Polymers were prepared with 0, 5, 10, 15, 20, and 25%, by weight, 12-HMA with PTAd as the other macroglycol and with 0, 10, 15, and 20% 12-HMA with PEAd as the other macroglycol. At 15% 12-HMA, polymers were made from glycol mixtures having 275 and 350 average OHE to demonstrate the effect of changing the hard-segment concentration. The presence of 12-HMA is shown to have its maximum effect on tensile properties at 15–20% in the PTAd series and at 10% in the PEAd series. In general, this effect is an increase in tensile strength and modulus and a decrease in elongation when compared with a similar polymer without the 12-HMA.     

Cosorption of Zn(II) and 2-, 3-, or 4-aminopyridine by montmorillonite

Data from acid-base titrations at 25 degrees C of Zn(NO(3))(2) and 2-, 3-, or 4-aminopyridine in 10 mM KNO(3) as background electrolyte suggested that soluble complexes ZnL(2+) and Zn(OH)L(+) form, where L represents aminopyridine. Zinc-hydroxyaminopyridine complexes have not been reported previously. The cosorption of Zn(II) with each of the aminopyridines to K-saturated Wyoming (SWy-K) and Texas (STx-K), and Ca-enriched Texas (STx-Ca) montmorillonites was measured at 25 degrees C, with 10 mM KNO(3) or 3.3 mM Ca(NO(3))(2) as background electrolyte. Comparison with previous data for sorption of Zn(II) and the aminopyridines separately and surface complexation modeling of the cosorption data showed that under acid conditions competition between Zn(2+) and aminopyridinium ions for the permanent negatively charged sites of montmorillonite results in suppression of the uptake of each sorbate by the other, but only when a large excess of the competing sorbate is present. Under alkaline conditions the sorption of Zn(II) was not affected by the presence of even a large excess of aminopyridine, but the sorption of 4-aminopyridine in particular was slightly enhanced when a large excess of Zn(II) was present. The enhancement was attributed to the formation of metal-bridged ternary surface complexes at the variable-charge sites on the edges of the montmorillonite crystals.     

Anharmonicity in rotational and vibrational excitation of H2 by Li+ collisions

Integral cross sections for pure rotational and vibrational-rotational excitation of H₂(X¹Σ⁺_g) by Li⁺(¹S) impact are computed by close-coupling methods at 0.2, 0.6, and 1.2 eV in the c.m. system using vibrational functions that are numerical solutions of the one-dimensional radial Schrödinger equation for harmonic, Morse, and adiabatically corrected Kolos-Wolniewicz (KW) potential functions. Comparison of results employing KW and Morse functions shows excellent agreement for all transitions studied. Findings using harmonic oscillator functions, however, differ noticeably from KW and Morse values for vibrational (0 → 1) and very large rotational (Δj = 10) transitions, but are satisfactory for lower order (0 → 2, 4, 6, 8) rotational transitions.     

Octylgermane on gold: synthesis, oxidation, and pattern formation

Chemisorbed monolayers of octylgermane (C8H17GeH3) on gold have been formed by vapor deposition in ultrahigh vacuum. The monolayer has been characterized by X-ray photoelectron and reflection absorption infrared spectroscopies (XPS and RAIRS) and scanning tunneling microscopy (STM). XPS data indicate the monolayer can be oxidized by exposure to ozone. STM images exhibit a complex pattern which can be modeled as strain-mediated spinodal decomposition.     

Kinetics of the solvolysis of [Co(Rpy)4Cl4]+ with R = 4-t-Bu, 3-Me or 3-Et in mixtures of urea with water

Summary The kinetics of the solvolysis of complex ions trans-[Co(Rpy)₄Cl₂]⁺, with R = 4-t-Bu, 3-Me and 3-Et, have been investigated in mixtures formed by adding urea to water, which enhances the dielectric constant and decreases solvent structure. Differential effects of the changes in solvent structure on the initial and transition states are found to be important factors controlling changes in the rate constant with solvent composition. The variation of the enthalpy and the entropy of activation with solvent composition are contrasted with their variations found for the solvolysis of [Co(Rpy)₄Cl₂]⁺ in mixtures where solvent structure is enhanced by additions of a co-solvent to water. The application of a free energy cycle to the process of the initial state going to the transition state suggests that the Co³⁺ cation in the transition state is more stable than the Co³⁺ cation in the initial state in the water + urea mixtures.     

Adsorption of aspartic acid on kaolinite

The interaction of aspartic acid with kaolinite was studied by potentiometric titrations and by adsorption measurements both at constant aspartate concentration (but varying pH) and at a constant pH of 5.5. The temperature was 25 degrees C, and the ionic medium 5 mM KNO3. Aspartic acid dissociation constants estimated from titrations agreed with those from the literature. The adsorption of aspartic acid to kaolinite was weak and varied only slightly with pH; 10-18% of 100 microM aspartic acid adsorbed to kaolinite at 100 m(2)L(-1) between pH 3 and 10. Data from the titrations and adsorption experiments were fitted closely by an extended constant-capacitance surface complexation model, in which monodentate outer-sphere complexes formed between deprotonated aspartic acid molecules and protonated sites on the variable-charge edges of the kaolinite crystals. There appeared to be no adsorption to the permanently charged crystal faces.     

Dicholorbenzyl alkyl ether homologs as retention index markers and internal standards for the analysis of environmental samples using capillary gas chromatography

A homologous series of 2,4-dichlorobenzyl alkyl ethers (DCBEs) have been synthesized and purified for use as retention index calibrants and internal standards. They are stable, sensitive to ECD and FID and ideal for GC-MS, with base peaks at m/z 159/161. The retention index calibration against the n-alkanes for a linear temperature program (LTP) series is given and recommendations made for the most suitable members of the DCBE series for use as internal standards in organochlorine (OC) residue analysis.     

RECENT ADVANCES IN POLARIZATION SPECTROSCOPY: PERSPECTIVES OF THE EXTENSION TO THE SOFT X-RAY REGION

In this paper we present a general review of some of the new branches in the field of optical activity that have been developed during the last five years. Also, the conditions under which circular intensity differential scattering can be measurable in the soft X-ray region of the spectrum are established. It is found that the parameter which determines the strength of the preferential interaction of chiral molecules with opposite circular polarizations at these high energies is the anisotropy of the atomic polarizabilities in the molecule. The possibility of extending the other techniques discussed here to shorter wavelengths, is also discussed.