An Approximate Expression for the Degree of Counterion Binding of Dressed Micelles

A simple formula for calculating the degree of counterion binding of dressed micelles is presented. This approximate expression for the spherical micelle is derived from the extending Langmuir's method in the case of high surface potentials. It works quite well for the estimation of the degree of counterion binding of micelles. The simple form is very convenient for practical use.     

Crosslinked organosiloxane hybrid materials prepared by condensation of silanol and modified silica: Synthesis and characterization

Hybrid materials based on polymethylphenylsiloxane (PMPS) and organic functionalized silica were synthesized via condensation reaction between silanol and alkoxysilyl groups in the presence of quaternary ammonium hydroxide. The structure of prepared materials was investigated by FTIR and NMR, which indicate that the products have incorporated modified silica into the polymer matrix. The prepared hybrid materials show a satisfactory thermal resistance because the initial decomposition of typical product occurred at nearly 100 K higher than that of the pure polymer according to the thermogravimetric analysis (TGA) results. Differential thermogravimetric analysis (DTGA) data confirm that the thermal degradation of prepared hybrid materials comprises of two steps, of which the first one could be controlled by adjusting the content of silica particles and the ratio of surface groups on the particles. The coating films obtained from hybrid products exhibit good thermal mechanical properties. Therefore, the materials are hoped to be used for the application in thermal resistant coating.     

Surface Performance and Cytocompatibility Evaluation of Acrylic Acid-Mediated Carboxymethyl Chitosan Coating on Poly(tetrafluoroethylene-co-hexafluoropropylene)

To improve the biocompatibility of poly(tetrafluoroethylene-co-hexafluoropropylene) (FEP) film, a technique based on Ar plasma pretreatment and UV-induced grafting polymerization was used to immobilize carboxymethyl chitosan (CMCS) on the FEP film surfaces. Initially Ar plasma was used to treat FEP film. Then, plasma treated FEP film was modified via UV-induced grafting polymerization with hydrophilic acrylic acid (AAc) monomer. The following immobilization of CMCS on the FEP-pAAc surface was carried out via an amidation reaction. The change of chemical composition and surface morphology of FEP film were characterized by attenuated total reflectance Fourier transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), scanning electronic microscopy (SEM) and atomic force microscopy (AFM). Results of water contact angles measurement showed that the hydrophilicity of the surface has improved significantly after surface modification. Furthermore, methyl thiazolyl tetrazolium (MTT) assay and cell morphology analysis confirmed that mouse fibroblasts (L929 cells) attachment and proliferation were improved remarkably on the modified FEP surface. These results suggest that CMCS were successfully employed to surface engineering FEP film, and enhanced its cell biocompatibility. The approach presented here may be exploited for surface modification of biomaterials.     

A quantum mechanics/molecular mechanics study on the hydrolysis mechanism of New Delhi metallo-β-lactamase-1

New Delhi metallo-β-lactamase-1 (NDM-1) has emerged as a major global threat to human health for its rapid rate of dissemination and ability to make pathogenic microbes resistant to almost all known β-lactam antibiotics. In addition, effective NDM-1 inhibitors have not been identified to date. In spite of the plethora of structural and kinetic data available, the accurate molecular characteristics of and details on the enzymatic reaction of NDM-1 hydrolyzing β-lactam antibiotics remain incompletely understood. In this study, a combined computational approach including molecular docking, molecular dynamics simulations and quantum mechanics/molecular mechanics calculations was performed to characterize the catalytic mechanism of meropenem catalyzed by NDM-1. The quantum mechanics/molecular mechanics results indicate that the ionized D124 is beneficial to the cleavage of the C–N bond within the β-lactam ring. Meanwhile, it is energetically favorable to form an intermediate if no water molecule coordinates to Zn2. Moreover, according to the molecular dynamics results, the conserved residue K211 plays a pivotal role in substrate binding and catalysis, which is quite consistent with previous mutagenesis data. Our study provides detailed insights into the catalytic mechanism of NDM-1 hydrolyzing meropenem β-lactam antibiotics and offers clues for the discovery of new antibiotics against NDM-1 positive strains in clinical studies.     

The ring-opening of chiral oxazoline involving pyrrolidone

Chiral N-[1-benzyl-2-hydroxyethyl]-3-[2-oxo-pyrrole]propionamide (C₁₆H₂₂N₂O₃) was obtained unexpectedly from the reaction of oxazoline involving pyrrolidone with copper acetate monohydrate, and the structure was characterized by NMR, IR, elemental analysis, and X-ray analysis.     

Transparent conducting Sn:ZnO films deposited from nanoparticles

Homogeneous transparent conducting Sn:ZnO films on fused silica substrates were prepared by dip-coating from nanoparticle dispersions, while the nanocrystalline Sn:ZnO particles with different dopant concentrations were synthesized by microwave-assisted non-aqueous sol–gel process using Sn(IV) tert-butoxide and Zn(II) acetate as precursors and benzyl alcohol as solvent. The dopant concentration had a great impact on the electrical properties of the films. A minimum resistivity of 20.3 Ω cm was obtained for a porous Sn:ZnO film with initial Sn concentration of 7.5 mol% after annealing in air and post-annealing in N₂ at 600 °C. The resistivity of this porous film could further be reduced to 2.6 and 0.6 Ω cm after densified in Sn:ZnO and Al:ZnO reaction solution, respectively. The average optical transmittance of a 400-nm-thick Sn:ZnO film densified with Sn:ZnO after the two annealing steps was 91%.     

Catalytic Asymmetric Construction of Quaternary α‐Amino Acid Containing Pyrrolidines through 1,3‐Dipolar Cycloaddition of Azomethine Ylides to α‐Aminoacrylates

The first catalytic enantioselective 1,3‐dipolar cycloaddition of azomethine ylides to α‐aminoacrylate catalyzed by a AgOAc/ferrocenyl oxazolinylphosphine (FOXAP) system was developed, which exhibits excellent exo‐ and enantioselectivity (92–99 % ee). This process provides efficient access to useful 4‐aminopyrrolidine‐2,4‐dicarboxylic acid (APDC)‐like compounds containing a unique quaternary α‐amino acid unit.     

Alstolactines A–C,novel monoterpenoid indole alkaloids from Alstonia scholaris

Three novel ring-fused monoterpenoid indole alkaloids, alstolactines A–C (1–3), were isolated from the long-term stored leaves of Alstonia scholaris. Their structures were identified on the basis of extensive spectroscopic data and X-ray diffractions. Moreover, the absolute configurations of these related structures were indicated by the crystal X-ray diffractions (Mo Kα) of 1a, a chlorinated derivative of 1.     

Self-calibration method for cerium-doped lanthanum bromide scintillator detector in the 0.1–2.0 MeV energy range

In recent years, the cerium-doped lanthanum bromide, LaBr₃ (Ce = 5 %) detector is increasingly playing an important role in radiation measurements because of its higher energy resolution (~3 % at 662 keV), faster luminescence decay time (~35 ns) and higher detection efficiency compared to 7.65 cm × 7.65 cm NaI(Tl) detector. Intrinsic spectra between 1,800 and 3,000 keV derived from internal radioactivity within LaBr₃(Ce) scintillators have been investigated in some literatures, and these results are confirmed by the experiments in this work. In this paper, a new method for LaBr₃(Ce) detector energy calibration from 100 to 2,000 keV is proposed using the intrinsic spectra (self-calibration) instead of the standard gamma sources. Proof-of-concept experiment results show that self-calibration can guarantee energy accuracy of better than 0.815 % and can be applied outside the laboratory. The stability and applicability of this method are also investigated systematically.     

Chemical composition and in vitro evaluation of the cytotoxic and antioxidant activities of supercritical carbon dioxide extracts of pitaya (dragon fruit) peel

Background

Hylocereus polyrhizus and Hylocereus undatus are two varieties of the commonly called pitaya fruits, and pitaya fruits have gained popularity in many countries all over the world. However, studies on chemical composition and the nutritional quality of pitaya flesh peel are limited.

Results

Extracts of pitaya (H. polyrhizus and H. undatus) peel were extracted by supercritical carbon dioxide extraction, and analyzed by gas chromatography–mass spectrometry analysis. Their cytotoxic and antioxidant activities were investigated. The main components of H. polyrhizus extract were β-amyrin (15.87%), α-amyrin (13.90%), octacosane (12.2%), γ-sitosterol (9.35%), octadecane (6.27%), 1-tetracosanol (5.19%), stigmast-4-en-3-one (4.65%), and campesterol (4.16%), whereas H. undatus were β-amyrin (23.39%), γ-sitosterol (19.32%), and octadecane (9.25%), heptacosane (5.52%), campesterol (5.27%), nonacosane (5.02%), and trichloroacetic acid, hexadecyl ester (5.21%). Both of the two extracts possessed good cytotoxic activities against PC3, Bcap-37, and MGC-803 cells (IC₅₀ values ranging from 0.61 to 0.73 mg/mL), and the activities of their main components were also studied. Furthermore, these extracts also presented some radical scavenging activities, with IC₅₀ values of 0.83 and 0.91 mg/mL, respectively.

Conclusion

This paper provides evidence for studying the chemical composition of supercritical carbon dioxide extracts of pitaya peel and their biological activity.