充水管道声分隔片消声性能研究II.实验研究

将声分隔片结构用于充水管道,对其消声性能进行了实验研究。主要由吸声橡皮构成的长的声分隔片,在10kHz--100kHz的频率范围内,测得其传递损失在10dB左右。     

大豆中蛋白质含量的示波滴定

1 引言大豆中蛋白质含量的测定,国内外标准方法是采用凯达尔法,作者研究了用示波滴定的方法进行测定,样品用H_2SO_4-Na_2SO_4-CuSO_4消化处理,N以NH_4~+的形式存在于试液中.在pH5～6用四苯硼钠(Na-TPB)沉淀NH_4~+,过量的TPB,在pH10～12的NaOH-NaAc碱性底液中有明显的示波图,用四乙基氯化铵标准溶液反滴定至TPB示波图下切口突然消失为终点,据此计算出N含量,再换算为蛋白质的含量.2 实验部分2.1 仪器与试剂 LS-1A型示波滴定仪(山东电讯七厂);磁力搅拌器;钨电极;汞膜电极;PHS-3C型酸度计.N标准溶液:1.000×10~3mg/L,用优级纯NH_4CI配制;Na-TPB溶液:0.05mol/L;30%NaOH溶液;无水Na_2SO_4;CuSO_4-5H_2O;H_2SO_4相对密度1.84g/ml;HAc-NaAc缓冲溶液:pH=5.5,取2mol/LNaAc溶液,滴加HAc调节,用酸度计测量;四乙基氯化铵标准溶液:0.02mol/L,用示波滴定法标定.     

5英寸锑化铟晶片加工及表征

锑化铟(InSb)材料因其特殊的性质被广泛用于红外光电探测等领域。随着更大面阵中波红外焦平面探测器的发展以及对低成本InSb红外探测器的需求,所需的晶片材料尺寸也日益增加。本文通过采用新结构石墨托以及高精度低损伤单线切割实现了5英寸InSb晶体定向断段;采用低损伤边缘倒角技术同时优化研磨参数改善了5英寸InSb晶片研磨;通过优化贴片工序提高了5英寸InSb晶片抛光后的平整度;通过优化抛光液pH值以及配比提高了5英寸InSb晶片表面质量。同时,使用X射线晶体定向仪、原子力显微镜等测试仪器对5英寸InSb晶片的晶向及偏差、抛光表面宏观质量、几何参数、表面粗糙度、晶格质量进行了测试表征。测试结果表明,采用优化后的加工工艺制备出了高质量的5英寸InSb晶片,能够满足InSb红外探测器制备需求。     

杯[4]芳烃钛-Al(iBu)_3催化乙烯聚合

众所周知 ,茂金属催化剂用于烯烃聚合 ,不仅具有高的催化活性 ,而且能制得高规整度聚合物 ,在理论研究和工业应用中都有十分重要的意义 ,国际上已形成对茂金属催化剂的研究热潮 .人们在致力于研究茂金属催化剂的同时 ,并没有停止对非茂金属均相催化剂的研究 ,其中酚氧基钛、锆配合物的优良催化性能尤为引人注目 ,这类新型均相催化剂能高效地催化烯烃均聚[1 ] ,苯乙烯间规聚合[2 ] ,乙烯 苯乙烯共聚等[3] .杯芳烃是由若干个对叔丁基苯酚通过亚甲基经 2 ,6位连接而成的一类环状大分子 ,其结构与酚氧类配体相似 .李勇等曾发现杯芳烃钛化合物与…     

Polyoxometalate-Derived Multi-Component X/W2C@X,N-C (X=Co,Si, Ge,B, and P) Nanoelectrocatalysts for Efficient Triiodide Reduction in Dye-Sensitized Solar Cells

Multi-component tungsten carbide-based hybrid materials featuring different heteroatom dopants coated with X,N dual-doped carbon layers (X/W₂C@X,N-C, XWXNC) were prepared by selecting Keggin-type polyoxometalates (POMs) (NH₄)_n[XW₁₂O₄₀] (X=Co, Si, Ge, B, and P) and dicyandiamide (DCA) as precursors. The electrocatalytic activity of these nanocomposites as counter electrode (CE) catalysts for dye-sensitized solar cells (DSSCs) was systematically investigated. Structure characterizations show that X,N heteroatoms were successfully introduced into the W₂C and carbon frameworks. The obtained X,N dual-doped carbon layers were modified and loaded with W₂C nanoparticles, promoting the improvement of catalytic performance by a synergistic effect. The consequence of photoelectric conversion efficiency (PCE) is CoWCoNC (6.68 %)>SiWSiNC (6.56 %)>GeWGeNC (6.49 %)>BWBNC (6.45 %)>PWPNC (6.20 %)>WNC (6.05 %). With the increase in electronegativity of the dopants, the photovoltaic performance decreases in a reverse order. This work provides a shortcut to the rational design of highly efficient and cost-effective catalysts for DSSCs.     

The valuation of equity warrants in a fractional Brownian environment

In this paper, we discuss the valuation of equity warrants in the geometric fractional Brownian environment based on the equilibrium condition. Using the conditional expectation we present a fractional pricing model for equity warrants and analyze the influence of the Hurst parameter. Then we propose an optimization procedure to obtain the valuation of equity warrants. Some numerical examples are given to demonstrate the pricing results by comparing different pricing models. Furthermore, we provide an empirical study to show how to apply our model in realistic contexts, and these comparative results of different pricing models show that the pricing model proposed in this paper matches the actual price quite well.     

The kinetics and mechanism of ultrasonic degradation of p-nitrophenol in aqueous solution with CCl4 enhancement

The ultrasonic degradation of p-nitrophenol (p-NP) in aqueous solution with CCl₄ enhancement was studied. The effects of operating parameters such as CCl₄ dosage, ultrasonic power, media temperature, the initial concentration of p-NP and initial pH value of the aqueous solution on the degradation of p-NP were investigated, and the enhancement mechanism of CCl₄ for p-NP sonolysis was also discussed. The results showed that the sonochemical degradation of p-NP was obviously enhanced by adding CCl₄. It attributed to the increase OH radicals concentration in the presence of CCl₄ as a hydrogen atom scavenger, and the formation of some oxidizing agents such as free chlorine and chlorine-containing radicals. The degradation of p-NP follows a pseudo-first-order kinetics. The degradation rate of p-NP increased with decreasing the temperature, the initial pH value of the solution and decreasing the initial concentration of p-NP. It was also found that p-NP can be mineralized in this process.     

Adsorption of the insensitive explosive TATB on single-walled carbon nanotubes

The non-covalent adsorption of the insensitive explosive TATB (1,3,5-triamino-2,4,6-trinitrobenzene) on the sidewalls of single-walled carbon nanotubes (CNTs) has been calculated using an ONIOM approach. It was found that TATB deformed remarkably when attached non-covalently on the surface of CNTs, especially on the inner wall of the nanotubes. The diameter of the nanotube determined the degree of distortion of the inner-adsorbed TATB, but had little effect on the deformation of the outer-attached TATB. The non-covalent combination of TATB with the nanotube is an exothermic process due to the negative adsorption energy. TATB adsorption on the inner wall of nanotubes was energetically more favorable than that on the outer wall of the nanotubes. In both cases, the adsorption became more stable with increasing diameter of the nanotube. Our theoretical results can be used as a guideline for the design of energetic nanocomposites based on CNTs and aromatic nitro-explosives.     

Ion-Polymer Interactions in SmCl3(H2O)6 Doped Poly(ethylene oxide) Electrolytes

Pure and SmCl₃(H₂O)₆ doped poly(ethylene oxide) (PEO) samples were prepared using a solvent casting method. These samples were characterized using Fourier transform infrared (FTIR), X-ray diffraction (XRD), and differential scanning colorimetry (DSC) techniques. The FTIR spectra indicate that, only at low dopant concentrations, the interactions between Sm³⁺ and ether oxygen atoms in PEO are dominant. As the dopant concentration increases, these interactions result in the formation of dopant aggregates or agglomerates leading to a phase separation into a polymer-rich phase and a dopant-rich phase in the films, which have been confirmed by XRD and DSC results.     

Polymer-monovalent salt-induced DNA compaction studied via single-molecule microfluidic trapping

Polymer-monovalent salt-induced single-molecule DNA compaction/condensation in a microfluidic stagnation point flow was studied by analyzing both DNA compaction images and time trajectories. For the whole DNA compaction process we observed three successive steps: Step I, a relaxation process of the stretched DNA that occurs slowly along the whole DNA chain, Step II, nucleus formation and growth, and Step III, corresponding to a rapid compaction of the chain. A memory effect was observed between Steps I and III, and a new (intruder-induced) nucleation mode was observed for the first time. This study extends the use of the microfluidic stagnation point flow, which we have previously used for sequence detection and to measure enzyme kinetics site-specifically.