Two New Xanthone Glycosides from Polygala tenuifolia

Two new xanthone glycosides,polygalaxanthone IV and V were isolated from the roots of Polygala tenuifolia Willd. Their structures were established as 6-O-[α-L-rhamnopyranosyl-(1→2)-β-D-glucopyranosyl]-1-hydroxy-3,7-dimethoxyxanthone(polygalaxanthone IV), and 6-O-[α-L-rhamnopyranosyl-(1→2)-β-D-glucopyranosyl]-1,3-dihydroxyl-7-methoxyxanthone (polyga-laxanthone V),respectively, on the basis of chemical and spectral evidence.     

The evolution of morphology of ordered porous TiO2 films fabricated from sol-gel method assisted ZnO nanorod template

Ordered porous TiO₂ films, including TiO₂ nanotube arrays, are fabricated by a sol-gel dip-coating approach via ZnO nanorod templates obtained from aqueous solution approach. The results indicate that the morphologies of ordered porous TiO₂ films have been great affected by the sol-gel dip-coating cycle number. Open-ended TiO₂ nanotube arrays can be obtained in optimum dip-coating cycle numbers. The TiO₂ nanotubes with the inner diameter matching well with the diameters of ZnO nanorods, are well assembled and separate each other. When the cycle number is less than this optimum value, no intact porous TiO₂ film can be obtained. As the cycle number is larger than this optimum value, an ordered porous TiO₂ film with many throughout holes is formed. The evolutive mechanism of ordered porous TiO₂ films is proposed.     

Elucidating dominant factors of PO43-, Cd2+ and nitrobenzene removal by biochar: A comparative investigation based on distinguishable biochars

Four distinct biochars were employed to remove three typical pollutants, meanwhile, path analysis, a multi-statistical regression method, was performed to elucidate the dominant factors of biochar adsorption. This work can provide a new insight to prepare a targeted biochar as adsorbents.     

六元N-杂环配体TIAMPP的合成及其在不对称催化加氢中的应用

在三乙胺的作用下，利用（S）-3-羟甲基-1，2，3，4-四氢异喹啉（（S）-TicOL）和Ph2PCl缩合，得到六元N-杂环配体（S）-TIAMPP．研究了（S）-TIAMPP与Rh（I）形成的手性催化剂[Rh（（S）-TIAMPP）（COD）]BF。在脱氢氨基酸的衍生物中不对称催化加氢的对映选择性和适应性，以及该催化剂对N-苯甲酰基脱氢肉桂酸甲酯加氢过程中温度、压力、反应溶剂、底物与催化剂比例（S／C）对光学收率的影响．结果表明，在S／C=100，15℃，1．0MPa的甲醇溶液中，反应24h，[Rh（（S）-TIAMPP）（COD）]BF。对N-苯甲酰基脱氢肉桂酸甲酯加氢的光学收率可达到96％．     

A new method for inversion of hydroxyl group of carbocyclic nucleosides

The hydroxyl group of carbocyclic nucleosides was inversed when the compounds were treated with Me_3SiCl,KCN and a catalytic amount of NaI in DMF/CH_3CN.     

1,3-二羧甲基咪唑盐酸盐热分解过程研究

离子液体是继超临界流体之后的一类新的绿色溶剂,因其具有一系列独特的性质,作为溶剂和反应介质已广泛应用于有机合成、催化反应工程、电化学、分离分析等领域.随着研究和应用的逐渐深入,仅仅将离子液体作为溶剂和反应介质已不能满足要求,使离子液体带上某些官能团,从而赋予其特定的功能,是相关领域的一个研究热点.1,3-二取代咪唑盐是一类常用的离子液体,对其功能化具有重要意义.1,3-二羧甲基咪唑的制备简单,将它与不同的酸如盐酸、磷酸、硼酸等进行反应,可得到对称二羧甲基取代的咪唑盐.这类咪唑盐作为缩聚单体与二醇或二胺反应,可得到每个重复链节上都含有咪唑阳离子的新的功能性聚酯或聚酰胺;如果用其掺杂导电聚苯胺,因其挥发性低则有可能大大提高聚苯胺的导电寿命.     

固相膜萃取与GC/MS联用测定地下水中痕量半挥发性有机物的野外采样方法研究

C18固相萃取膜适宜处理大体积地下水样现场采样而且易于运输、贮存。利用C18固相膜萃取以及GC／MS联用的方法对地下水中痕量半挥发性有机污染物进行了萃取以及定性、定量分析。优化了固相膜萃取的地下水采样量和浓缩体积。有机氯农药和多环芳烃的平均回收率分别为85％～110．1％、90．3％～115．1％；方法检出限达到10^-9g／L；相对标准偏差均小于15％。本方法用于北京地区地下水中的有机污染物分析，并给出地下水样C18固相膜萃取的GC／MS测定结果。     

Effect of nucleating agent on the structure and properties of polypropylene/poly(ethylene-octene) blends

The effect of the sorbital nucleating agent on properties of the ethylene-octene copolymer (POE) toughened polypropylene (PP) was studied. The results show that the addition of POE increases notched Izod and Charpy impact strength significantly but impair the tensile strength and flexural modulus. As a nucleating agent (1,3,2,4-di(p-methylbenzylidene) sorbitol, DM) was added, the toughness and stiffness of toughed PP increased simultaneously at the same content of POE. This result shows that the toughness and stiffness of toughed PP are in balance. Polarized light microscopy analysis shows that with the addition of POE and nucleating agent, only a low level of PP spherulites were observed.     

某些含二维液晶基元的热致液晶高分子的向列态纹影响构

发现某些含二维液晶基元的热致液晶高分子容易产生反向壁织构与含有高强度有错点（│Ｓ│大于１）的向列态纹影织构。这类液晶高分子的织构与形态学特点与含一维棒状液晶基元的其他液晶高分子不同。     

Photovoltaic Characteristics of a Naphthylamine Derivative

Organic photovoltaic （OPV） cells were fabricated via vacuum vapor deposition with {4-[2-（3-di-cyanomethylidene-5,5-dimethylcyclohexenyl）vinyl]phenyl}di（1-naphthyl）amine （DNP-2CN） as the electron donor, and fullerene （C60） as the electron acceptor. A thin film （10 nm） of tris（8-quinolinolato）aluminum （Alq3） was adopted as the buffer layer. A device based on this DNP-2CN exhibited an open circuit voltage （Voc） of 370 mV, a short-circuit current density （Jsc） of 0.61 mAocm 2, and a white-light power conversion efficiency （ η） of 0.09% （AM1.5, 75 mW.cm^- 2）.