Hydrogen bonded layer-by-layer assembly of poly(2-vinylpyridine) and poly(acrylic acid): Influence of molecular weight on the formation of microporous film by post-base treatment

This article describes the buildup of hydrogen bonded multilayer film of poly(2-vinylpyridine) (P2VP) and poly(acrylic acid) (PAA), and the influence of polymer molecular weight on the formation of microporous film by post-base treatment. The formation of a microporous film involved a two-step mechanism: the release of PAA from P2VP/PAA multilayer, and the reorganization of the remaining P2VP on the substrate. Fourier transform infrared spectroscopy (FT-IR) indicated that the release of PAA from hydrogen bonded multilayer was a rapid process, which was almost independent of the molecular weight of PAA. Furthermore, the molecular weight of P2VP had a great effect on micropore formation by immersing the P2VP/PAA multilayer in basic solution. The rate of micropore formation increased with increasing molecular weight. We anticipate that a comparative study on P2VP/PAA films containing high or low molecular weight polymer provides a way to control the surface morphology, and will be helpful and constructive for the forthcoming discussion about the formation of the microporous film.     

米非司酮的吸附伏安特性

在ＰＨ７．０Ｂｒｉｔｔｏｎ－Ｒｏｂｉｎｓｏｎ缓冲溶液中，米非司酮（Ｍｉｆｅｐｒｉｓｔｏｎｅ，ＲＵ４８６）在汞电极上有２个不可逆的线性扫描还原峰，峰电位分别为－１．２３Ｖ和－１．６８Ｖ。本文探讨了第一峰的电化学行为。     

Potentiometric immunosensor based on antiserum of Japanese B encephalitis immobilized in nano-Au/polymerized o-phenylenediamine film

A novel potentiometric immunosensor for detection of Japanese B encephalitis vaccine was developed by immobilizing antiserum of Japanese B encephalitis on nano-Au/polymerized o-phenylenediamine (o-PDA) film on the platinum (Pt) electrode. The performance and factors influencing the performance of the resulting immunosensor were studied. The immunosensor showed a specific response to Japanese B encephalitis vaccine in the range 1.1 × 10⁻⁸ to 2.0 × 10⁻⁶ lgpfu/ml (plaque forming unit) with a detection limit of 6 × 10⁻⁹ lgpfu/ml. The correlation coefficient is 0.9986. The incubation time, incubation temperature, pH, reproducibility and stability of the immunosensor were also studied. The present work supplied a promising test method for biological products.     

烟酸对酸性硫酸盐体系铜电沉积的影响

对溶液A: 0.8 mol•L－1硫酸铜,0.6 mol•L－1硫酸,5.0×10－5 mol•L－1氯离子,1.0×10－4 mol•L－1聚乙二醇的溶液,溶液B:在溶液A中加入2.0×10－2 mol•L－1烟酸,pH为0.5,运用循环伏安和计时安培法研究玻碳电极上铜的电沉积行为.结果表明,铜的电沉积过程经历了晶核形成过程,其电结晶按瞬时成核和三维生长方式进行.烟酸的加入对铜的电沉积具有阻化作用,但不改变铜的电结晶机理.沉积层的X射线衍射表明Cu为面心立方结构,在烟酸存在下沉积层出现(220)高择优取向,这可能是烟酸在Cu(220)晶面上发生强烈吸附作用的结果.     

甲烷二氧化碳介质阻挡放电转化产物分布研究

针对介质阻挡放电甲烷二氧化碳转化实验,分析了反应的产物分布,探讨了进料组成和反应器结构对反应的影响.反应产物包括:高H2/CO摩尔比的合成气、气态烃、高辛烷值的汽油组分、醇和酸等含氧有机物.对所述电极结构,产物的选择性随碳数增加而降低;高的甲烷进料浓度有利于烃的生成,对醇和酸的最佳甲烷进料体积分数范围在67.4％～75.1％;放电间隙越小,原料转化率和烃、酸的选择性越大,大的放电间隙对醇的生成有利.     

Chemical constituents from the roots of <Emphasis Type="Italic">Polygonum bistorta</Emphasis>

Investigation of the roots of Polygonum bistorta L. afforded seven compounds including five triterpenoids, a coumarin, and a steroid, the structures of which were identified by EIMS, ¹H NMR, ¹³C NMR, DEPT, and HMBC experiments. All the compounds have been isolated from Polygonum genus for the first time. Published in Khimiya Prirodnykh Soedinenii, No. 5, pp. 463–465, September–October, 2007.     

Carboxylic Acids from <Emphasis Type="Italic">Phyllanthus urinaria</Emphasis>

Five compounds, terephthalic acid mono-[2-(4-carboxy-phenoxycarbonyl)-vinyl] ester (1), (E)-3-(5′-hydroperoxy-2,2′-dihydroxy[1,1′-biphenyl]-4-yl)-2-propenoic acid (2), 3,4,5-trihydroxybenzoic acid (3), succinic acid (or butanedioic acid) (4), and 2,3,4,5,6-pentahydroxybenzoic acid (5), were isolated from Phyllanthus urinaria. The structures of these compounds were elucidated by means of spectral techniques including IR, MS, and 1D/2D NMR. 1 and 2 are new compounds.__________Published in Khimiya Prirodnykh Soedinenii, No. 1, pp. 14–17, January–February, 2005.     

Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.     

Ternary surface complexes by theE(%)-pH curve method

A new method for the study of ternary surface complexes at liquid-solid interface, theE(%) -pH curve method, was proposed. Four types ofE(%)-pH curves, namely, phenomenon of left-right shifts of S-shaped curve, V-shaped curve, monodirection shift curve and X-shaped curve, were discovered. Correspondingly, apart from type (I) ternary surface complex and type (II) ternary surface complex , a new type of ternary surface complex was discovered. Project supported by the National Natural Science Foundation of China and the Fund of Doctoral Degree’s Spot.     

碱性溶液中金电极上氧还原中间物研究

应用改进了的旋转全电极上的电势阶跃计时库仑法,分别测定了不同电极电势下氧还原过程中电极吸附中间物和溶解中间物氧化所需的电量,实验证明,在此过程中电极上确有吸附中间物存在,而且是电极电势的函数,但其分子属性尚需进一步鉴别。