共沉淀法制备纳米多晶La2／3Sr1／3MnO3及其低场磁电阻性质

利用共沉淀法制备了纳米多晶La2/3Sr1/3MnO3粉体,并研究了相应烧结陶瓷的相结构、显微形貌、电性质以及磁电阻效应.样品中存在高密的晶界,对电子的疏运过程产生明显的散射作用,从而使得样品具有较大的电阻值,并且只有当烧结温度大于800℃时才出现金属绝缘体温度相变.样品的磁电阻是低场磁电阻效应,源于晶界处电子的自旋极化隧穿.烧结温度越低的样品,其磁电阻越大.     

脉冲管制冷机调相机构的研究 第一部分 双向进气模式的研究

基于线性热声理论,通过数值计算定量分析了双向进气对脉冲管制冷机性能的影响,指出:在惯性管已经为脉冲管制冷机提供了所需的最佳阻抗时,双向进气不能提高脉冲管制冷机的性能,只有在惯性管没有为制冷机提供作需的最佳阻抗时,双向进气模式才能发挥积极的作用。     

食管癌患者指甲的红外光谱研究

利用傅里叶红外光谱对正常人,食管癌患者,食管癌术后5个月者的指甲进行了研究。发现他们指甲的红外光谱在频率,强度,峰形等方面均有差异。主要表现在:食管癌患者νs(PO2-)和νas(PO2-)的振动峰均向高波数偏移,术后者回落;癌患者蛋白质C—O基团峰强度增强,术后者峰强度有所减弱,但仍比正常人强;癌患者角蛋白脂质CH2和CH3伸缩振动峰波数有所下降。术后者介于癌患者与正常人之间;食管癌患者角蛋白脂质CH2和CH3弯曲振动峰稍向高波数偏移,术后者恢复至正常人水平;癌患者酰氨Ⅰ带和Ⅱ带都向低波数偏移,术后者介于两者之间。这些差异是应用红外光谱诊断食管癌的基础,表明FTIR光谱在食管癌的早期诊断和快速诊断方面有着十分美好的前景。     

采用HfO2/SiO2溶胶-凝胶薄膜制备衍射光栅

采用溶胶-凝胶方法制备了具有光敏性的HfO2/SiO2溶胶-凝胶薄膜,并利用其光敏性制备了衍射光栅.采用XPS分析了薄膜的成份,证实了Hf元素的存在.并用椭偏仪测试了薄膜的折射率,结果证实了HfO2的加入确实提高了体系的折射率.利用其光敏性,采用X射线作曝光光源通过掩模进行曝光,利用曝光部分与未曝光部分的溶解度差,在薄膜上制备了高为0.8 μm、周期为1 μm的衍射光栅.     

腔内型光电导太赫兹辐射产生器设计

提出了在飞秒锁模钛宝石激光器腔内产生太赫兹辐射的新设计方案,并给出了太赫兹产生器件的结构参数以及器件的设计原理.新设计的器件把光电导太赫兹偶极天线发射器与飞秒钛宝石激光器的可饱和Bragg反射镜结合在一起,不仅可以提高太赫兹辐射的产生效率,而且可以使飞秒钛宝石激光器自启动锁模.     

Space-Selective Precipitation of Ba2TiSi2O8 Crystals in Sm3^＋-Doped BaO-TiO2-SiO2 Glass by Femtosecond Laser Irradiation

The ferroelectric crystal Ba2TiSi2O8 with high second-order optical nonlinearity is precipitated in Sm^3＋-doped BaO-TiO2-SiO2 glass by a focused 800hm, 250 kHz and 150fs femtosecond laser irradiation. No apparent blue and red emissions are observed at the beginning, while strong blue emission due to second harmonic generation and red emission due to the f-f transitions of Sm^3＋ are observed near the focal point of the laser beam after irradiation for 25s. Micro-Raman spectra confirm that Ba2 TiSi2O8 crystalline dots and lines are formed after laser irradiation. The mechanism of the phenomenon is discussed.     

Surface functionalisation of polymer nanofibres by sputter coating of titanium dioxide

The surface properties of nanofibres are of importance in various applications. In this work, electrospun polyamide nanofibres were used as substrates for creating functional nanostructures on the nanofibre surfaces. A RF magnetron sputter coating was used to deposit the functional layer of titanium dioxide (TiO₂) onto the nanofibres. Atomic force microscopy (AFM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and environmental scanning electron microscopy (ESEM) were employed to study the topography, grain structure and wetting of the nanofibre surfaces, respectively. The AFM results indicated a significant difference in the morphology of the nanofibres before and after the TiO₂ sputter coating. The XRD analysis showed the amorphous structures of the TiO₂ deposition layer. XPS spectra reflected the chemical features of the deposited nanostructures. The ESEM observation revealed that the surface wettability of TiO₂ sputter coated nanofibres was significantly improved after UV irradiation.     

Facile route to high-density, ordered ZnO nanowire arrays and their photoluminescence properties

A simple template-directed wet chemistry route based on traditional thermal decomposition technique has been developed for the preparation of high-density, ordered ZnO nanowire arrays. The fabrication was performed at relative low temperature without involving complex procedures, sophisticated equipment and rigorous experiment conditions, thereby providing a straightforward and mild method to produce metal/metal oxide ordered nanostructures. The nanowire array system was evaluated by SEM, XRD, TEM and PL. A stable luminescence at 425 nm was present.     

一种半球形天空亮度测量仪器的研制

在大气光学领域中,天空亮度分布有着重要的应用.简要介绍了天空亮度的测量原理,在分析同类测量仪器的基础上,提出了一种用于白天的,可见及近红外波段天空亮度测量仪器的设计,介绍了系统的组成和探测器的选择.经过定标,仪器能够得到天空亮度的绝对值,其结果反映了真实天空亮度分布的变化.该仪器弥补了传统的天空亮度测量仪器住测量波段、实时性、便携性等方面的不足,更好地满足了实际的科研需求.     

自动对靶喷雾靶标红外探测研究

农林作物一般非连续种植,喷在农林作物靶标之间的药液造成巨大浪费和严重环境污染,因此探讨利用红外线探测技术实现靶标的自动探测, 对靶精准喷施意义重大。红外线可有效防止可见光的干扰,响应速度快,可实现无接触探测,由此建立的红外光电探测系统可靠性好、成本低。红外发光管发射出红外光照射到被探测物体上,反射的红外线被光电探测器接收,触发控制信号,实现自动对靶施药。系统中不同探测器组采用不同编码的调制脉冲红外信号,可消除组间光路干扰及其他光信号的干扰。实验结果表明所建立的红外靶标自动探测装置可对农林作物靶标进行自动探测,光波波长为850 nm,探测距离为0.1～6 m可调,靶标最小识别间距小于0.3 m。