Flow Injection Chemiluminescence for the Determination of Estriol via a Noncompetitive Enzyme Immunoassay

A novel approach to the detection of estriol using a flow injection system coupled to enhanced chemiluminescent immunoassay was developed based on noncompetitive immunoassay formats. A conjugated estriol-ovalbumin immobilized immunoaffinity column was inserted into the flow system to trap the unbound horseradish peroxidase (HRP)-labeled antibody after an off-line incubation of estriol and HRP-labeled anti-estriol antibody. The trapped enzyme conjugate was detected by the injection of chemiluminescent substrates to produce enhanced chemiluminescence. The linear range for the determination of estriol is 10.0 to 400 ng · mL⁻¹ with a correlation coefficient of 0.996 and a detection limit of 5.0 ng · mL⁻¹. The total time for sampling and chemiluminescent detection of one sample is 400 seconds after 30 min of pre-incubation. The results for pregnancy serum samples obtained by this method are in good agreement with those obtained using ELISA.     

Synthesis and Structure of MnCl2(HDpyF) (HDpyF = N,N′‐di(2‐pyridyl)formamidine): New Crystallographic Disorder and Bonding Mode of the HDpyF Ligand

The reaction of N,N′‐di(2‐pyridyl)formamidine (HDpyF) with MnCl₂‐4H₂O afforded the complex MnCl₂(HDpyF), which was characterized by X‐ray crystallography. The HDpyF ligand chelates to the Mn(II) center through the first and the third nitrogen atoms to form a six‐membered ring, leaving the second and the fourth nitrogen atoms uncoordinated. The HDpyF ligand is crystallographically disordered such that two different molecules can be solved. The neutral HDpyF ligand adopts the new s‐cis‐syn‐s‐trans conformation.     

Simultaneous Reduction of Nitro Group and S-S Bond in Nitrodisulfides by Samarium Diiodide: A New Approach to Benzothiazolines

Asapowerfulandversatileone-electrontransferreductant,Sml,hasbeenappliedwidelyinorganicsynthesis'.OurpreviousworksonthereductionofnitrocompoundsandreductivecleavageofS-S,Se-Se,Te-TebondswithSml,'ledustoinvestigatethesimultaneousreductionofnitrogroupandS-SbondbySml,.Benzothiazolinesderivativesareimportantreagentsandusefulintermediatesinorganicsynthesisandpharmaceuticalchemistry.Forinstance,theycanbeusedasadditionagentsforphotographicemulsions",effectiveacaricides",antituberculousagents",lubr…     

A novel high-performance fourier transform ion cyclotron resonance cell for improved biopolymer characterization

A new trapped ion cell design for use with Fourier transform ion cyclotron resonance mass spectrometry is described. The design employs 15 cylindrical ring electrodes to generate trapping potential wells and 32 separately assignable rod electrodes for excitation and detection. The rod electrodes are positioned internal to the ring electrodes and provide excitation fields that are thereby linearized along the magnetic field over the entire trapped ion volume. The new design also affords flexibility in the shaping of the trapping field using the 15 ring electrodes. Many different trapping well shapes can be generated by applying different voltages to the individual ring electrodes, ranging from quadratic to linearly ramped along the magnetic field axis, to a shape that is nearly flat over the entire trap volume, but rises very steeply near the ends of the trap. This feature should be useful for trapping larger ion populations and extension of the useful range of ion manipulation and dissociation experiments since the number of stages of ion manipulation or dissociation is limited in practice by the initial trapped ion population size. Predicted trapping well shapes for two different ring electrode configurations are presented, and these and several other possible configurations are discussed, as are the predicted excitation fields based on the use of rod electrodes internal to the trapping ring electrodes. Initial results are presented from an implementation of the design using a 3.5 T superconducting magnet. It was found that ions can be successfully trapped and detected with this cell design and that selected ion accumulation can be performed with the utilization of four rods for quadrupolar excitation. The initial results presented here illustrate the feasibility of this cell design and demonstrate differences in observed performance based upon different trapping well shapes.     

Development of a new reaction system for the synthesis of highly optically active alpha,gamma-substituted gamma-butyrolactones

A highly useful method for the synthesis of optically active alpha,gamma-substituted gamma-butyrolactones has been developed. The SmI(2)-induced reductive coupling of chiral 2-alkyl acrylates derived from isosorbide with ketones in the presence of (1S)-(-)-2,10-camphorsultam as a proton source give the chiral alpha,gamma-substituted gamma-butyrolactones in good yields and high enantiomeric purities (up to >99% ee for trans and 75% ee for cis). The reaction system has been investigated with various ketones, and it is demonstrated that this system is very effective for trans-alpha,gamma-substituted gamma-butyrolactones. Both the chiral auxiliary and the hindered proton source in this system are necessary for the observed excellent ee values of the products. The absolute configuration of the trans products is assigned on the basis of the X-ray crystal structure.     

Improvement of the performance of facilitated transport membrane process through nonuniformity

Facilitated transport process has attracted much attention because high selectivity and high permeability may be achieved. However, most research on facilitated transport process is concerned only with uniform membranes. In this paper, a model predicting the gas separation performance of a hollow-fiber module with facilitated transport membrane is developed. The influence of feed rate, operation pressure, and permeant-feed flow pattern on the module performance are analyzed and the effect of the nonuniform distribution of reaction equilibrium constant is examined. The calculated results show that the nonuniform active distribution may cause an improved module performance. Because of the passive transport characteristics of the facilitated transport process, the mass transfer driving force across the membrane has a great influence on the improvement of the module performance through a facilitated transport effect.     

The fragmentation reaction of 16R-bromopregnane-3S,20S-diol

16R-Bromopregnane-3S,20S-diol reacted with potassium t-butoxide to afford androst-16-en-3S-ol in a moderate yield via fragmentation reaction. The latter is a key intermediate for the synthesis of 5α-androst-16-en-3-one, as boar sex pheromone, and other steroidal drugs. In addition, 16R,20S-epoxypregnane-3S-ol was also obtained as a major product by changing the reaction solvent.     

Energy Landscape of Aptamer/Protein Complexes Studied by Single‐Molecule Force Spectroscopy

Aptamers are single‐stranded nucleic acid molecules selected in vitro to bind to a variety of target molecules. Aptamers bound to proteins are emerging as a new class of molecules that rival commonly used antibodies in both therapeutic and diagnostic applications. With the increasing application of aptamers as molecular probes for protein recognition, it is important to understand the molecular mechanism of aptamer–protein interaction. Recently, we developed a method of using atomic force microscopy (AFM) to study the single‐molecule rupture force of aptamer/protein complexes. In this work, we investigate further the unbinding dynamics of aptamer/protein complexes and their dissociation‐energy landscape by AFM. The dependence of single‐molecule force on the AFM loading rate was plotted for three aptamer/protein complexes and their dissociation rate constants, and other parameters characterizing their dissociation pathways were obtained. Furthermore, the single‐molecule force spectra of three aptamer/protein complexes were compared to those of the corresponding antibody/protein complexes in the same loading‐rate range. The results revealed two activation barriers and one intermediate state in the unbinding process of aptamer/protein complexes, which is different from the energy landscape of antibody/protein complexes. The results provide new information for the study of aptamer–protein interaction at the molecular level.     

Detection of TMV with ODA-H(2)O(2)-HRP voltammetric enzyme-linked immunoassay system

o-Dianisidine (ODA)-H₂O₂-horseradish peroxidase (HRP) voltammetric enzyme-linked immunoassay system has firstly been used for the detection of tobacco mosaic virus (TMV). HRP catalyzes strongly the oxidation reaction of ODA by H₂O₂, the product of which produces a sensitive second order derivative linear sweep voltammetric peak at potential of −0.56 V (versus SCE) in Britton–Robinson (BR) buffer. HRP activity has been measured with this voltammetric peak and TMV detected through immunoreaction. The detection limit for HRP is 9.25×10^-7 mU l⁻¹ and the linear range is 2.5×10⁻⁶–5.0×10⁻⁴ mU l⁻¹. The detection limit for the clarified TMV is 0.25 ng ml⁻¹ and the highest dilution ratio detected for the infected leaf sap is 1:8×10⁵. The sensitivity for TMV detection with this method is higher than that with the enzyme-linked immunosorbent spectrophotometric assay (ELISA) using ODA-H₂O₂-HRP system. The processes of the enzyme-catalyzed reaction and the electro-reduction of the product of the enzyme-catalyzed reaction have been described.