Electrospun Porous NiCo2O4 Nanotubes as Advanced Electrodes for Electrochemical Capacitors

Novel, porous NiCo₂O₄ nanotubes (NCO‐NTs) are prepared by a single‐spinneret electrospinning technique followed by calcination in air. The obtained NCO‐NTs display a one‐dimensional architecture with a porous structure and hollow interiors. The effect of precursor concentration on the morphologies of the products is investigated. Due to their unique structure, the prepared NCO‐NT electrode exhibits a high specific capacitance (1647 F g^?1 at 1 A g^?1), excellent rate capability (77.3 % capacity retention at 25 A g^?1), and outstanding cycling stability (6.4 % loss after 3000 cycles), which indicates it has great potential for high‐performance electrochemical capacitors. The desirable enhanced capacitive performance of NCO‐NTs can be attributed to the relatively large specific surface area of these porous and hollow one‐dimensional nanostructures.     

Investigate the capability of INAA absolute method to determine the concentrations of 238U and 232Th in rock samples

This work aimed to study the capability of INAA absolute method in determining the elemental concentration of ²³⁸U and ²³²Th in the rock samples. The INAA absolute method was implemented in PUSPATI TRIGA Mark II research reactor, Malaysian Nuclear Agency (NM). The accuracy of INAA absolute method was performed by analyzing the IAEA certified reference material (CRM) Soil-7. The analytical results showed the deviations between experimental and certified values were mostly less than 10 % with Z-score in most cases less than 1. In general, the results of analysed CRM Soil-7 show a good agreement between certified and experimental results which mean that the INAA absolute method can be used accurately for elemental analysis of uranium and thorium in various types of samples. The concentration of ²³⁸U and ²³²Th ranged from 1.77 to 24.25 and 0.88 to 95.50 ppm respectively. The highest value of ²³⁸U and ²³²Th was recorded for granite rock sample G17 of ²³⁸U and sample G9 of ²³²Th, whereas the lower value was 1.77 ppm of ²³⁸U recorded in sandstone rock and 0.88 ppm of ²³²Th for gabbro. Moreover, a comparison of the ²³⁸U and ²³²Th results obtained by the INAA absolute method shows an acceptable level of consistency with those obtained by the INAA relative method.     

Cerium oxide-catalyzed multicomponent condensation approach to spirooxindoles in water

An efficient and facile green synthesis of spirooxindole derivatives bearing pyrano[2,3-c]pyrazole moiety has been achieved via a \(\mathrm{CeO}_{2}\)-NPs catalyzed four-component reaction in water. The protocol offers an environmentally benign and effective approach to highly functionalized and biologically interesting spiro[indoline-3,4\(^\prime \)-pyrano[2,3-c]pyrazole] derivatives. The synthesized compounds exhibit potent antioxidant and antibacterial activities.     

Immuno‐Chemotherapeutic Platinum(IV) Prodrugs of Cisplatin as Multimodal Anticancer Agents

There is growing consensus that the clinical therapeutic efficacy of some chemotherapeutic agents depends on their off‐target immune‐modulating effects. Pt anticancer drugs have previously been identified to be potent immunomodulators of both the innate and the adaptive immune system. Nevertheless, there has been little development in the rational design of Pt‐based chemotherapeutic agents to exploit their immune‐activating capabilities. The FPR1/2 formyl peptide receptors are highly expressed in immune cells, as well as in many metastatic cancers. Herein, we report a rationally designed multimodal Pt^IV prodrug containing a FPR1/2‐targeting peptide that combines chemotherapy with immunotherapy to achieve therapeutic synergy and demonstrate the feasibility of this approach.     

Ordered nanostructured ceramic–metal composites through multifunctional block copolymer-metal nanoparticle self-assembly

A novel strategy for fabrication of ordered ceramic–metal nanocomposites was demonstrated by multifunctional block copolymer/metal nanoparticle self-assembly. Hybrid organic–inorganic block copolymer poly(3-methacryloxypropyl-T8-heptaisobutyl-polyhedral oligomeric silsesquioxane-block-N,N-dimethylaminoethyl methacrylate) was synthesized and used as a bi-functional structure directing agent for ligand-stabilized platinum nanoparticles to form ordered organic–inorganic nanocomposites with dense loading of inorganic species in both microphase separated domains. Subsequently, thin films of the hybrid material were converted to ordered silica (ceramic)–platinum (metal) nanocomposites via UV-assisted ozonolysis. This is the first time ordered ceramic–metal nanocomposites were achieved through a bottom-up approach, opening up opportunities for the design and synthesis of a broad range of ordered inorganic–inorganic nanocomposites.     

The Still-Wittig Rearrangement in the Preparation of a Synthetically Useful 4C-Hydroxymethyl-hex-2-eno-pyranoside

The Still-Wittig rearrangement of the stannyl-ether 9 is successfully carried out under optimal reaction conditions to give the 4C-hydroxymethy-hex-2-enopyranoside 10 in good yields (70–74%).     

Effect of styrene–acrylonitrile content on 0.5?M NaI/0.05?M I2 liquid electrolyte encapsulation for dye-sensitized solar cells

The effect of a gel polymer electrolyte (GPE) as the redox electrolyte used in dye-sensitized solar cells was studied. A GPE solution consisting of 0.5?M sodium iodide, 0.05?M iodine, and ethylene carbonate/propylene carbonate (1:1 w/w) binary solvents was mixed with increasing amounts of styrene–acrylonitrile (SAN). Bulk conductivity measurements show a decreasing trend from 4.54 to 0.83×10^?3?S?cm^?1 with increasing SAN content. The GPE exhibits Newtonian-like behavior and its viscosity increases from 0.041 to 1.093?Pa?s with increasing SAN content. A balance between conductivity (1.3?×?10^?3?S?cm^?1) and viscosity (1.4?Pa?s) is observed at 19?wt.% SAN. Fourier transform infrared spectroscopy detects elevated ring torsion at 706?cm^?1 upon the addition of SAN into the liquid electrolyte. This indicates that SAN does not bond with the liquid electrolyte. Finally, the potential stability window of 19?wt.% SAN, which ranges from ?1.68 to 1.38?V, proves its applicability in solar cells.     

Two-phase partition chromatography using soybean oil eliminates pesticide residues in aqueous ginseng extract

This study was carried out to develop a cost-, labor- and efficiency-effective elimination method of pesticide residues in ginseng extract. A two-phase partition method between soybean oil and distilled water or aqueous ginseng extract was employed for the elimination of pesticide residues. Content of the pesticides was determined by gas chromatography with electron capture or nitrogen phosphorus detector. A total of 15 pesticides representing four categories (organochlorine, organophosphorus, carbamate, pyrethroid) were spiked (ca. 2 ppm) to 2 ml soybean oil in a test tube and the oil was mixed with 6 ml distilled water or 10% aqueous ginseng extract. The test tubes were then vortexed (2 min) and centrifuged at 3000 rpm for 15 min to separate the oil and aqueous layers. Each layer was harvested and subjected to quantitative analysis of pesticides. The average distribution ratio of the pesticides to the oil layer was 94.4 +/- 6.7% in the mixture of the oil and distilled water, and 105.5 +/- 6.6% in the mixture of the oil and ginseng extract. No significant qualitative and quantitative change of ginsenosides, the active ingredients of Panax ginseng, was observed in the ginseng extract before and after the oil treatment. These results suggest that two-phase partition chromatography between soybean oil and the aqueous phase is a cost-, labor- and efficiency-effective reliable method for the elimination of pesticide residues in ginseng extract.     

Rule for structures of open metal surfaces

We present a clear and simple rule for determining the relaxation sequences on open (stepped, vicinal, or high-Miller-index) metal surfaces. At the bulk-truncated configuration of a surface, a surface slab is defined where the coordination of atoms is reduced from the bulk. The rule predicts that the interlayer spacings within this slab contract, while the interlayer spacing between this slab and the substrate expands. By first-principles calculations, we show that this rule is obeyed on all open Cu surfaces with interlayer spacings down to about 0.5 A. We also illustrate a direct relation of the relaxation sequences to the charge redistribution on these surfaces, which is demonstrated to be driving the multilayer relaxations. The applicability of the rule can be extended to other fcc and bcc metals, including unreconstructed and missing-row surfaces.