Physico-chemical characterization of nanofiltration membranes.

This study presents a methodology for an in-depth characterization of six representative commercial nanofiltration membranes. Laboratory-made polyethersulfone membranes are included for reference. Besides the physical characterization [molecular weight cut-off (MWCO), surface charge, roughness and hydrophobicity], the membranes are also studied for their chemical composition [attenuated total reflectance Fourier spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS)] and porosity [positron annihilation spectroscopy (PAS)]. The chemical characterization indicates that all membranes are composed of at least two different layers. The presence of an additional third layer is proved and studied for membranes with a polyamide top layer. PAS experiments, in combination with FIB (focused ion beam) images, show that these membranes also have a thinner and a less porous skin layer (upper part of the top layer). In the skin layer, two different pore sizes are observed for all commercial membranes: a pore size of 1.25-1.55 angstroms as well as a pore size of 3.20-3.95 angstroms (both depending on the membrane type). Thus, the pore size distribution in nanofiltration membranes is bimodal, in contrast to the generally accepted log-normal distribution. Although the pore sizes are rather similar for all commercial membranes, their pore volume fraction and hence their porosity differ significantly.     

Photodissociation of sulfur dioxide cluster anions

Photodissociation of negatively charged sulfur dioxide clusters (SO₂) _n ^? , 2≦n≦11, was investigated in the wavelength range between 458 nm and 600 nm using a tandem mass spectrometer. The spectral position of the absorption band remains unchanged, however it exhibits narrowing with increasing cluster size. The smooth evolution of the spectra shows that the clusters are composed of a dimer anion core surrounded by neutral molecules. The analysis of the fragmentation products reveals that the absorption of a photon is followed by statistical evaporation of neutrals with a mean energy loss of 0.28±0.05 eV per evaporated monomer in the large cluster limit.     

ULTRAVIOLET ACTION SPECTRA FOR PHOTOBIOLOGICAL EFFECTS IN CULTURED HUMAN LENS EPITHELIAL CELLS

Abstract— The action spectrum for cell killing by UV radiation in human lens epithelial (HLE) cells is not known. Here we report the action spectrum in the 297–365 nm region in cultured HLE cells with an extended lifespan (HLE B-3 cells) and define their usefulness as a model system for photobiological studies. Cells were irradiated with monochromatic radiation at 297, 302, 313, 325, 334 and 365 nm. Cell survival was determined using a clonogenic assay. Analysis of survival curves showed that radiation at 297 nm was six times more effective in cell killing than 302 nm radiation; 297 nm radiation was more than 260, 590, 1400 and 3000 times as effective in cell killing as 313, 325, 334 and 365 nm radiation, respectively. The action spectrum was similar in shape to that for other human epithelial cell lines and rabbit lens epithelial cells. The effect of UV radiation on crystallin synthesis was also determined at different wavelengths. To determine whether exposure to UV radiation affects the synthesis of β-crystallin, cells were exposed to sublethal fluences of UV radiation at 302 and 313 nm, labeled with [³⁵S]methionine and the newly synthesized βY-crystallin was analyzed by immunoprecipitation and western blotting using an antibody to β-crystallin. The results show a decrease in crystallin synthesis in HLE cells irradiated at 302 and 313 nm at fluences causing low cytotoxicity. The effect of radiation on membrane perturbation was determined by measuring enhancement of synthesis of prostaglandin E₂ (PGE₂). Synthesis of PGE₂ occurs at all UV wavelengths tested in the 297–365 nm region. The slope of the PGE₂ response curves was higher than that of cell killing curves in cultured HLE cells. These data show that cultured HLE cells with extended lifespan are a suitable system for investigating photobiological responses of cells to UV radiation.     

Protein-Loop Mimetics: A Diketopiperazine-Based Template to Stabilize Loop Conformations in Cyclic Peptides Containing the NPNA and RGD Motifs

We explore here an approach to mimic the structures and biological functions of protein loops in small synthetic molecules, by grafting the loop of interest onto an organic template comprising a bicyclic diketopiperazine, prepared by the formal coupling of (2S,4S)-4-aminoproline (Pro(NH₂)) and aspartic acid (Asp). The Fmoc-protected template 4 is used to prepare cyclo(-Ala¹-Asn²-Pro³-Asn⁴-Ala⁵- Ala⁶-Temp-) ( 5 ) and cyclo(-Ala¹-Arg²-Gly³-Asp⁴-Temp-) ( 6 ) (where Temp = template derived from 4 ), containing the Asn-Pro-Asn-Ala (NPNA) and Arg-Gly-Asp (RGD) motifs. The conformational properties of these molecules are studied in aqueous solution by NMR and simulated-annealing methods. The NPNA motif, an immunodominant epitope on the circumsporozoite surface protein of the malaria parasite Plasmodium falciparum, is shown to adopt a stable type-I β-turn in 5 . The template in 5 adopts a preferred conformation with Pro(NH₂)χ₁ ≈? ?35° and the Asp moiety χ₁ ≈? 70°. A different template conformation is inferred for 6 , with Pro(NH₂)χ₁ ≈? 0°, but the ARGD loop appears by NMR to undergo rapid conformational averaging. Solid-phase binding assays reveal that 6 displays modest antagonist activity towards both the integrin α_IIbβ₃ and α_vβ₃ receptors.     

Different approaches toward an automatic structural alignment of drug molecules: Applications to sterol mimics,thrombin and thermolysin inhibitors

Summary A relative comparison of the binding properties of different drug molecules requires their mutual superposition with respect to various alignment criteria. In order to validate the results of different alignment methods, the crystallographically observed binding geometries of ligands in the pocket of a common protein receptor have been used. The alignment function in the program SEAL that calculates the mutual superposition of molecules has been optimized with respect to these references. Across the reference data set, alignments could be produced that show mean rms deviations of approximately 1 Å compared to the experimental situation. For structures with obvious skeletal similarities a multiple-flexible fit, linking common pharmacophoric groups by virtual springs, has been incorporated into the molecular mechanics program MOMO. In order to combine conformational searching with comparative alignments, the optimized SEAL approach has been applied to sets of conformers generated by MIMUMBA, a program for conformational analysis. Multiple-flexible fits have been calculated for inhibitors of ergosterol biosynthesis. Sets of different thrombin and thermolysin inhibitors have been conformationally analyzed and subsequently aligned by a combined MIMUMBA/SEAL approach. Since for these examples crystallographic data on their mutual alignment are available, an objective assessment of the computed results could be performed. Among the generated conformers, one geometry could be selected for the thrombin and thermolysin inhibitors that approached reasonably well the experimentally observed alignment.     

THE EFFECTS OF THROMBOXANE INHIBITORS ON THE MICROVASCULAR AND TUMOR RESPONSE TO PHOTODYNAMIC THERAPY

Abstract— Vascular stasis and tissue ischemia are known to cause tumor cell death in several experimental models after photodynamic therapy (PDT); however, the mechanisms leading to this damage remain unclear. Because previous studies indicated that thromboxane release is implicated in vessel damage, we further examined the role of throm-boxane in PDT. Rats bearing chondrosarcoma were injected with 25 mg/kg Photofrin® (intravenously) 24 h before treatment. Light (135 J/cm ² , 630 nm) was delivered to thc tumor area after injection of one of the following inhibitors: (1) R68070: a thromboxane synthetase inhibitor; (2) SQ-29548: a thromboxane receptor antagonist; and (3) Flunarizine: an inhibitor of platelet shape change. Systemic thromboxane levels were determined. Vessel constriction and leakage were evaluated by intravital microscopy. Tumor response was assessed after treatment. Thromboxane levels were decreased more than 50% with SQ-29548 as compared to controls. Thromboxane levels in animals given R68070 and Flunarizine remained at baseline levels. SQ-29548 and R68070 reduced vessel constriction compared to controls, while Flunarizine totally prevented vessel constriction. R68070 and SQ-29548 inhibited vessel permeability compared to PDT controls; Flunarizine did not. Animals given these inhibitors showed markedly reduced tumor cure. These results indicate that the release of thromboxane is linked to the vascular response in PDT.     

Reactions of bis(hexamethylbenzene)iron(0) with carbon monoxide and with unsaturated hydrocarbons

Thermal decomposition of bis(hexamethylbenzene)iron(0) in the presence of carbon monoxide yields a novel carbonyl iron complex, [C₆(CH₃)₆]Fe(CO)₂. The cyclohexadiene complex [C₆(CH₃)₆]Fe(C₆H₈) is obtained from reaction of bis(hexamethylbenzene)iron(0) with either 1,3-cyclohexadiene or benzene, and the yield is much greater in the presence of hydrogen gas. Interaction of bis-(hexamethylbenzene)iron(0) with 2-butyne induces a catalytic cyclotrimerization to give more hexamethylbenzene. Kinetic and isotope distribution studies indicate that the primary step in these reactions is not a direct loss of one ring ligand, but rather an insertion of the iron center into one of the ligand methyl CH bonds, leading to a benzyl hydride complex species. Mechanisms for the subsequent reactions of this iron hydride species are proposed.     

Screening, library-assisted identification and validated quantification of 23 benzodiazepines, flumazenil, zaleplone, zolpidem and zopiclone in plasma by liquid chromatography/mass spectrometry with atmospheric pressure chemical ionization

A liquid chromatographic/mass spectrometric assay with atmospheric pressure chemical ionization (LC/APCI-MS) is presented for fast and reliable screening and identification and also for precise and sensitive quantification in plasma of the 23 benzodiazepines alprazolam, bromazepam, brotizolam, camazepam, chlordiazepoxide, clobazam, clonazepam, diazepam, flunitrazepam, flurazepam, desalkylflurazepam, lorazepam, lormetazepam, medazepam, metaclazepam, midazolam, nitrazepam, nordazepam, oxazepam, prazepam, temazepam and tetrazepam, triazolam, their antagonist flumazenil and the benzodiazepine BZ1 (omega 1) receptor agonists zaleplone, zolpidem and zopiclone. It allows confirmation of the diagnosis of an overdose situation and monitoring of psychiatric patients' compliance. The analytes were isolated from plasma using liquid-liquid extraction and were separated on a Merck LiChroCART column with Superspher 60 RP Select B as the stationary phase. Gradient elution was performed using aqueous ammonium formate and acetonitrile. After screening and identification in the scan mode using the authors' LC/MS library, the analytes were quantified in the selected-ion monitoring mode. The quantification assay was fully validated. It was found to be selective proved to be linear from sub-therapeutic to over therapeutic concentrations for all analytes, except bromazepam. The corresponding reference levels the assay's accuracy and precision data for all studied substances are listed. The accuracy and precision data were within the required limits with the exception of those for bromazepam. The analytes were stable in frozen plasma for at least 1 month. The validated assay was successfully applied to several authentic plasma samples from patients treated or intoxicated with various benzodiazepines or with zaleplone, zolpidem or zopiclone. It has proven to be appropriate for the isolation, separation, screening, identification and quantification of the drugs mentioned above in plasma for clinical toxicology, e.g. in cases of poisoning, and forensic toxicology, e.g. in cases of driving under the influence of drugs.     

Stille Cross‐Coupling of a Racemic Planar‐Chiral Ferrocene and Crystallographic Trace Analysis of Catalysis Intermediates and By‐products

A pressure‐controlled procedure for the S_N1 reaction of rac‐1‐[(dimethylamino)methyl]‐2‐(tributylstannyl)ferrocene ( 1 ) to rac‐1‐(phthalimidomethyl)‐2‐(tributylstannyl)ferrocene ( 2 ) was developed. Pd⁰‐Catalyzed Stille coupling of 2 with iodobenzene afforded rac‐1‐phenyl‐2‐(N‐phthalimidomethyl)ferrocene ( 5 ) in 74% yield; after trace enrichment by crystallization of the combined mother liquors, one single crystal of each, 5 , catalysis intermediate trans‐iodo(σ‐phenyl)bis(triphenylarsino)palladium(II) ( 7 ), trans‐diiodobis(triphenylarsino)palladium(II) ( 8 ), and rac‐2,2′‐bis(phthalimidomethyl)‐1,1′‐biferrocene ( 9 ) could be isolated by crystal sorting under a microscope and characterized by X‐ray crystal structure analysis. Furthermore, 5 was deprotected to amine ( 11 ), which does even survive the Birch reduction to rac‐1‐(aminomethyl)‐2‐(cyclohexa‐2,5‐dienyl)ferrocene ( 12 ).     

Übergangsmetall—methylen-komplexe: LXI. Übergangsmetall—vinyliden-komplexe: Neuartige synthese aus diazoalken-vorstufen

The diazoolefines of composition N₂CCR₂ (R/R = CH₃/CH₃ and(-CH₂-)₅) are suitable precursors of the corresponding vinylidene ligands CCR₂. Thus, treatment of the RhRh complex [(η⁵-C₅Me₅)Rh(μ-CO)]₂ (1) with the N-nitrosourethanes 2a and 2b, resp., in the presence of lithium t-butoxide yields the otherwise inaccessible μ-vinylidene complexes (μ-CCR₂)[(η⁵-C₅Me₅)Rh(CO)]₂ (R = CH₃ (3a), R,R = (-CH₂-)₅ (3b)). The analogous cobalt compound (μ-CCMe₂)[(η⁵-C₅Me₅)Co(CO)]₂ (5a) is obtained similarly. This procedure extends the well-documented diazoalkane method for the synthesis of μ-alkylidene complexes to the less stable diazoalkenes. A single-crystal X-ray diffraction study of the dimethylvinylidene derivative 3a shows the CMe₂ ligand to adopt an almost symmetrically metal-bridging position (d(RhC) 197.8(1) and 204.3(1) pm), with a rhodium-rhodium single bond completing a three-membered Rh₂C-metallacycle (d(RhRh) 268.4(0) pm) analogous with cyclopropane.