Occurrence and Characteristics of Staphylococcus aureus Isolated from Dairy Products

Food, particularly milk and cheese, may be a reservoir of multi-drug resistant Staphylococcus aureus strains, which can be considered an important issue in terms of food safety. Furthermore, foods of animal origin can be a cause of staphylococcal food poisoning via the production of heat-stable enterotoxins (SE). For this reason, we investigated the prevalence of and characterized Staphylococcus aureus strains isolated from milk and fresh soft cheese obtained from farms located in Wielkopolskie and Zachodniopomorskie Provinces in Poland. Overall, 92% of S. aureus isolates were positive for at least one of the 18 enterotoxin genes identified, and 26% of the strains harbored 5 to 8 enterotoxin genes. Moreover, the S. aureus strains contained genes conferring resistance to antibiotics that are critically important in both human and veterinary medicine, i.e., β-lactams (mecA), aminoglycosides (aac(6′)/aph(2″), aph(3′)-IIIa, ant(4′)-Ia) and MLS_B (erm(A), msr(A), lun(A)). The antimicrobial susceptibility of S. aureus to 16 antibiotics representing 11 different categories showed that 74% of the strains were resistant to at least 1 antibiotic. Moreover, 28% of the strains showed multidrug resistance; in particular, two methicillin-resistant S. aureus strains (MRSA) exhibited significant antibiotic resistance. In summary, our results show that dairy products are contaminated by S. aureus strains carrying genes encoding a variety of enterotoxins as well genes conferring resistance to antibiotics. Both MRSA strains and MSSA isolates showing multidrug resistance were present in foods of animal origin.     

Mechanochemical Synthesis of Fluorinated Imines

A number of imines, including 12 new compounds, previously not reported in the literature, derived from variously fluorinated benzaldehydes and different anilines or chiral benzylamines were synthesized by a solvent-free mechanochemical method, which was based on the manual grinding of equimolar amounts of the substrates at the room temperature. In a very short reaction time of only 15 min, the method produced the expected products with good-to-excellent yields. The yields were comparable or significantly higher than those reported in the literature for the imines synthesized by other methods. Importantly, the conditions used for the reactions with aniline derivatives also resulted in the high yields of imines obtained from chiral benzylamines, and can be extended to the synthesis with other similar amines. Structures of all imines were confirmed by NMR spectroscopy: ¹H, ¹³C and ¹⁹F. For four compounds, X-ray structures were also obtained. The synthetic approach presented in this paper contributes to the prevention of environmental pollution and can be easily extended for larger-scale syntheses. The mechanochemical solvent-free method provides a convenient strategy particularly useful for the preparation of fluorinated imines being versatile intermediates or starting material in the synthesis of drugs and other fine chemicals.     

Carbon Dioxide Adsorption over Activated Carbons Produced from Molasses Using H2SO4, H3PO4, HCl,NaOH, and KOH as Activating Agents

Cost-effective activated carbons for CO₂ adsorption were developed from molasses using H₂SO₄, H₃PO₄, HCl, NaOH, and KOH as activating agents. At the temperature of 0 °C and a pressure of 1 bar, CO₂ adsorption equal to 5.18 mmol/g was achieved over activated carbon obtained by KOH activation. The excellent CO₂ adsorption of M-KOH can be attributed to its high microporosity. However, activated carbon prepared using HCl showed quite high CO₂ adsorption while having very low microporosity. The absence of acid species on the surface promotes CO₂ adsorption over M-HCl. The pore size ranges that are important for CO₂ adsorption at different temperatures were estimated. The higher the adsorption temperature, the more crucial smaller pores were. For 1 bar pressure and temperatures of 0, 10, 20, and 30 °C, the most important were pores equal and below: 0.733, 0.733, 0.679, and 0.536 nm, respectively.     

Processing of Biomass Prior to Hydrogen Fermentation and Post-Fermentative Broth Management

Using bioconversion and simultaneous value-added product generation requires purification of the gaseous and the liquid streams before, during, and after the bioconversion process. The effect of diversified process parameters on the efficiency of biohydrogen generation via biological processes is a broad object of research. Biomass-based raw materials are often applied in investigations regarding biohydrogen generation using dark fermentation and photo fermentation microorganisms. The literature lacks information regarding model mixtures of lignocellulose and starch-based biomass, while the research is carried out based on a single type of raw material. The utilization of lignocellulosic and starch biomasses as the substrates for bioconversion processes requires the decomposition of lignocellulosic polymers into hexoses and pentoses. Among the components of lignocelluloses, mainly lignin is responsible for biomass recalcitrance. The natural carbohydrate-lignin shields must be disrupted to enable lignin removal before biomass hydrolysis and fermentation. The matrix of chemical compounds resulting from this kind of pretreatment may significantly affect the efficiency of biotransformation processes. Therefore, the actual state of knowledge on the factors affecting the culture of dark fermentation and photo fermentation microorganisms and their adaptation to fermentation of hydrolysates obtained from biomass requires to be monitored and a state of the art regarding this topic shall become a contribution to the field of bioconversion processes and the management of liquid streams after fermentation. The future research direction should be recognized as striving to simplification of the procedure, applying the assumptions of the circular economy and the responsible generation of liquid and gas streams that can be used and purified without large energy expenditure. The optimization of pre-treatment steps is crucial for the latter stages of the procedure.     

Assessment of Cucurbita spp. Peel Extracts as Potential Sources of Active Substances for Skin Care and Dermatology

By-products of cultivated plants are one of the major environmental concerns worldwide. Due to the high concentration of bioactive chemicals, such waste may be considered hazardous due to the interference with the plant growth, deterioration of the drinking water quality or toxic effects on sensitive marine organisms. Moreover, plant-derived by-products, with proper handling, may represent a low-cost source of bioactive compounds potentially important for pharmaceutical and cosmetics industries. The aim of the study was to evaluate the phytochemical composition, antioxidant activity, the influence of tyrosinase activity, in vitro sun protecting factor and cytotoxicity of 15 extracts from peels of five cultivars of Cucurbita maxima and C. moschata. The extracts were prepared using “green solvents” (water, 50% propylene glycol, and 20% ethanol) and ultrasound-assisted extraction. The performed analysis showed that the peel extracts from various cultivars differ significantly in respect to the phytochemical content and activity. The type of solvent also had a significant impact on the extract’s composition and bioactivity. Aqueous peel extracts contained the highest amounts of flavonoids, showed the greatest antioxidant potential and the most significant in vitro SPF values. In vitro studies showed that the analyzed peel extracts are not cytotoxic for human keratinocytes up to the concentration of 1000 µg/mL and thus might be considered as non-irritant for the skin. The study confirms the potential application of peel extracts from Cucurbita spp. cultivars in cosmetic products.     

Photoelectrochemical Properties of Annealed Anodic TiO2 Layers Covered with CuOx

In this work, we present a systematic study on the influence of Cu²⁺ ion concentration in the impregnation solution on the morphology, structure, optical, semiconducting, and photoelectrochemical properties of anodic CuO_x-TiO₂ materials. Studied materials were prepared by immersion in solutions with different concentrations of (CH₃COO)₂Cu and subjected to air-annealing at 400 °C, 500 °C, or 600 °C for 2 h. The complex characterization of all studied samples was performed using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), reflectance measurements, Mott–Schottky analyses, and photocurrent measurements. It was found that band gap engineering based on coupling CuO with TiO₂ (E_g~3.3 eV) is an effective strategy to increase the absorption in visible light due to band gap narrowing (CuO_x-TiO₂ materials had E_g~2.4 eV). Although the photoactivity of CuO-TiO₂ materials decreased in the UV range due to the deposition of CuO on the TiO₂ surface, in the Vis range increased up to 600 nm at the same time.     

Coordination chemistry of H-spirophosphorane ligands towards pentacarbonylchlororhenium(I) – synthesis,structure and catalytic activity of complexes

Synthesis of a group of carbonyl rhenium coordination compounds with hydrospirophosphorane ligands was carried out and described. Different symmetrical HP(OCH₂CH₂NH)₂ L1 , HP(OCH₂CMe₂NH)₂ L2 , HP(OC₆H₄NH)₂ L3 , and unsymmetrical ligands HP (OCMe₂CMe₂O)(OC₆H₄NH) L4 were found to coordinate to the rhenium center as bidentate P,N donor ligands yielding fac-[ReCl (CO)₃ Ln ], where n = 1 – 4. Furthermore, monodentate coordination was also observed in some cases, as was clearly presented in the case of [ReCl(CO)₂( L4- κ²P,N)( L4- κP)] complex. All of the complexes were characterized using optical spectroscopy. Single-crystalX-ray diffraction was also performed in the case of fac-[ReCl(CO)₃ L3 ], fac-[ReCl(CO)₃ L4 ], [Re(CO)₂( L2 )₂]Cl and [ReCl (CO)₂( L4- κ²P,N)( L4- κP)] samples. Complexes [ReCl(CO)₃ L3 ] and [ReCl (CO)₃ L4 ], both bearing rings of conjugated double bonds within hydrospirophosphorane ligands, exhibited luminescence. Catalytic properties of rhenium complexes were assessed using the representative fac-[ReCl (CO)₃ L2 ] complex in the dimerization reaction of terminal alkynes. An efficient and selective procedure for synthesis of the E - enynes was developed. Coupling of (2-chlorophenyl)acetylene was mediated by [ReCl (CO)₃ L2 ]/TBAF system with a 100% conversion rate. Different substituents within aromatic alkynes were tolerated and the resulting products were dependent on the nature of the substituents.     

Slice modules over minimal 2-fundamental algebras

We consider a class of algebras whose Auslander-Reiten quivers have starting components that are not generalized standard. For these components we introduce a generalization of a slice and show that only in finitely many cases (up to isomorphism) a slice module is a tilting module. The first named author was supported by the Polish Scientific Grant KBN No 1 P03A 018 27