Static and dynamic properties of grafted ring polymer: Molecular dynamics simulation

The static and dynamic properties of a system of end-grafted flexible ring polymer chains grafted to a flat substrate and exposed to a good solvent are studied by using a molecular dynamics method. The monomers are described by a coarse-grained bead-spring model. Varying the grafting density ρ and the degree of polymerization or chain length N, we obtain the density profiles of monomers, study the structural properties of the chain (radius of gyration, bond orientational parameters, etc.), and also present the dynamic characteristics such as chain energy and bond force. Compared with a linear polymer brush, the ring polymer brush exhibits different static and dynamic properties for moderate or short chain length, while it behaves like linear polymer brush in the regime of long chain length.     

Improved Quantum Signature Scheme with Weak Arbitrator

In this paper, we find a man-in-the-middle attack on the quantum signature scheme with a weak arbitrator (Luo et al., Int. J. Theor. Phys., 51:2135, 2012). In that scheme, the authors proposed a quantum signature based on quantum one way function which contains both verifying the signer phase and verifying the signed message phase. However, after our analysis we will show that Eve can adopt different strategies in respective phases to forge the signature without being detected. Then we present an improved scheme to increase the security.     

一种基于强边缘块的时域多分辨率图像分割算法

针对序列图像的变化检测,提出了一种基于强边缘块的时域多分辨率图像分割算法.首先在具有明显边缘特征的图像序列中,提取图像强边缘块的直方图,然后,利用时域多分辨算法,比较不同帧之间的图像差异.这种方法不但能够检测出图像的变化,而且能够确定图像变化的类型.在阈值的选取过程中,采用了自适应阈值方法,实验证明这种方法取得了较好的效果.     

利用频闪结构光测量旋转叶片的三维面形

在对快速甚至高速运动物体进行研究时,需要对运动物体各个时刻的三维面形和形变量进行数字化描述。提出了一种利用频闪光作为结构照明光源,基于傅里叶变换轮廓术对旋转叶片每个时刻的三维面形和变形量进行动态测量的光学方法。使用自行设计的同步控制单元对风扇叶片旋转位置进行检测,用该检测信号同步驱动频闪结构光源的发光和图像采集系统“冻结”记录下旋转叶片表面变形条纹的瞬时图像,再运用傅里叶变换轮廓术计算出每一瞬间时刻旋转叶片的三维面形,分析这些三维面形数字化结果可以进一步得到旋转叶片的变形量。通过对家用电风扇的实验,验证了该方法的合理性和可行性。该方法可望在高速运动物体的面形和变形研究上有广泛运用。     

Dynamic simulation of planetary gear set with flexible spur ring gear

Ring gear is a key element for vibration transmission and noise radiation in the planetary gear system which has been widely employed in different areas, such as wind turbine transmissions. Its flexibility has a great influence on the mesh stiffness of internal gear pair and the dynamic response of the planetary gear system, especially for the thin ring cases. In this paper, the flexibility of the internal ring gear is considered based on the uniformly curved Timoshenko beam theory. The ring deformation is coupled into the mesh stiffness model, which enables the investigation on the effects of the ring flexibility on the mesh stiffness and the dynamic responses of the planetary gear. A method about how to synthesize the total mesh stiffness of the internal gear pairs in multi-tooth region together with the ring deformation and the tooth errors is proposed. Numerical results demonstrate that the ring thickness has a great impact on the shape and magnitude of the mesh stiffness of the internal gear pair. It is noted that the dynamic responses of the planetary gear set with equally spaced supports for the ring gear are modulated due to the cyclic variation of the mesh stiffness resulted from the presence of the supports, which adds more complexity in the frequency structure.     

膨胀机力学模拟试验装置

为了适应当前发展的需要,本试验装置可以研究G-M制冷机中的膨胀机在动态环境下能否可靠工作,为其提供了强有力的试验平台。本装置可以单独实现水平面的旋转或垂直面的翻转,还可以同时实现水平面的旋转和垂直面的翻转。对G-M制冷机扩大应用领域是不可或缺的试验装置。     

对颗粒物质运动的一致性进行控制的随机力场

在颗粒流的研究中引入了一个正态分布的随机力场, 并通过计算机模拟研究了该力场对均匀颗粒流的影响. 结果发现: 随机力场基本上不改变均匀颗粒流的平均密度和速度, 对颗粒流密度的涨落也影响很小. 随机力场对均匀颗粒流的影响主要体现在它可提高速度的涨落, 它与颗粒体系的耗散性质相抗衡, 使颗粒流维持一定的波动能量. 研究结果还显示: 通过随机力场所获得的波动能量并没有均匀分布到各个自由度上, 由于颗粒体系的耗散性质颗粒体系难以达到能均分状态. 关键词： 颗粒物质 随机力 分子动力学模拟     

Color-stable,reduced efficiency roll-off hybrid white organic light emitting diodes with ultra high brightness

High-brightness and color-stable two-wavelength hybrid white organic light emitting diodes (HWOLEDs) with the configuration of indium tin oxide (ITO)/ N, N, N, N-tetrakis(4-methoxyphenyl)-benzidine (MeO-TPD): tetrafluoro-tetracyanoqino dimethane (F4-TCNQ)/N,N-di(naphthalene-1-yl)-N,N-diphenyl-benzidine (NPB)/ 4,4-N,N-dicarbazolebiphenyl (CBP): iridium (III) diazine complexes (MPPZ) 2 Ir(acac)/NPB/2-methyl-9,10-di(2-naphthyl)anthracene (MADN): p-bis(p-N,N-di-phenyl-aminostyryl)benzene (DSA-ph)/bis(10-hydroxybenzo[h] quino-linato)beryllium complex (Bebq2)/LiF/Al have been fabricated and characterized. The optimal brightness of the device is 69932 cd/m2 at a voltage of 13 V, and the Commission Internationale de l'Eclairage (CIE) chromaticity coordinates are almost constant during a large voltage change of 6-12 V. Furthermore, a current efficiency of 15.3 cd/A at an illumination-relevant brightness of 1000 cd/m2 is obtained, which rolls off slightly to 13.0 cd/A at an ultra high brightness of 50000 cd/m2. We attribute this great performance to wisely selecting an appropriate spacer together with effectively utilizing the combinations of exciton-harvested orange-phosphorescence/blue-fluorescence in the device. Undoubtedly, this is one of the most exciting results in two-wavelength HWOLEDs up to now.     

Magnetic structures in Ni80Fe20/Ru multilayers

Using polarized neutron reflectivity (PNR) measurements together with associated simulation, magnetic structures of two Ni₈₀Fe₂₀ (1 1 1)/Ru (0 0 0 1) multilayer samples with Ru thickness of 9 and 21 Å were investigated under various external magnetic fields at room temperature. The results reveal the existence of layer thickness, interface roughness, magnetic moment, interlayer coupling angle and non-collinear coupling. The former three are independent of Ru thickness; while the latter two are strongly dependent of Ru thickness.