Investigation of Cold Atmospheric Plasma-Activated Water for the Dental Unit Waterline System Contamination and Safety Evaluation in Vitro

The disinfection of the inner surface of a medical device has long been a challenge for the central sterile supply departments. Dental unit waterline system (DUWLs) foster the attachment of microorganisms and development of biofilm, which lead to continuous contamination of the outlet water from dental units; this contamination may be responsible for a potential risk of infection due to the exposure of patients and medical staff. The present study investigated the disinfection effects of cold atmospheric plasma-activated water (CAPAW) on DUWLs using a model of 5-day-old Enterococcus faecalis biofilm. The results showed that the colony-forming unit was reduced from 10⁷ to 0 after 5 min of treatment. The physicochemical properties of CAPAW were evaluated, including the pH value, oxidation reduction potential, and NO radical. The results showed that the inactivation mechanisms were mainly triggered by the reactive oxygen/nitrogen species. Additionally, CAPAW had a metal corrosion rate same as that of deionized water. We conclude that CAPAW can be applied as an appropriate alternative disinfectant against biofilm contamination of DUWLs.     

Experimental Study on Purification of Diesel Particulate Matter by Non-thermal Plasma Technology

In order to investigate the effects of non-thermal plasma (NTP) on diesel particulate matter (PM), an engine test bench was built up. An engine exhaust particle sizer (EEPS) was introduced to analyze the emission concentration and size distribution of PM and a thermo-gravimetric analyzer was used to analyze the effects of NTP on the composition of the particulate matter in the exhaust gas. The results show that the size distribution interval of the particle mass concentration falls behind that of the quantity concentration under various loads. When the diesel engine operating speed is 2400 rpm and the load is 25%, after NTP, the proportions of the nucleation mode particles and the accumulative mode particles exhibit a small fluctuation while the proportion of ultrafine particles decreases by 10% due to their large quantity concentration. Under the dual effect of DPF and NTP, the particle quantity concentration decreases by 98%. In order to investigate the effect of NTP on the composition of the PM, a thermo-gravimetric analysis of the particles obtained before and after NTP was carried out. The results show that the proportion of volatile matter falls by 16.05% and solid carbon accounts for an increase of 7.29%. NTP has the ability to improve reduction activity of particles and make particles easier to be oxidized at a lower temperature.     

A Practical System for High-Throughput Screening of Mutants of <Emphasis Type="Italic">Bacillus fastidiosus</Emphasis> Uricase

For high-throughput screening (HTS) of Bacillus fastidiosus uricase mutants, a practical system was proposed. By error-prone PCR with final 1.5 mM MnCl₂, two focused libraries of mutants for A1-V158 and V150-D212 were generated separately. After induced expression of individual clones in 48-well microplates, Escherichia coli cells (BL21) were lyzed by 1.0 M Tris-HCl at pH 9.0 in 96-well microplates at 25 °C for 7.5 ~ 10.5 h; uricase reaction was continuously monitored with 0.15 mM uric acid in 96-well plates by absorbance at 298 nm to estimate V _m/K _m by kinetic analysis of reaction curve for comparison. V _m/K _m was resistant to initial uric acid levels with an upper limit 3-fold over that of initial rates. By receiver-operator-characteristic analysis of the recognition of the one of higher activity in uricase pair whose specific activity ratio was 1.8 or 3.3, the area-under-the-curve was comparable to that with cell lysates prepared by sonication treatment. A cutoff for the maximum Youden index was thus developed to recognize positive mutants of 1-fold higher activity. Indeed, mutant L171I/Y182F/Y187F/A193S of higher activity but lower thermostability at pH 7.4 and mutant V144A of higher activity and consistent thermostability were discovered. Therefore, the proposed system was practical for HTS of uricase mutants.     

Research on the Effect of Dielectric Barrier Discharge (DBD) Plasma Remote Treatment on Drag Force of Polyethylene Terephthalate (PET) Yarns in Air Flow with Different Humidities

In this paper, long-lived free radicals in atmospheric-pressure DBD plasma were used to treat PET yarn surface. Subsequently, the drag force of treated yarns in air flow at four humidities (40 ± 3, 50 ± 3, 60 ± 3, 70 ± 3%) was measured. The results suggest that with the increase of flow humidity, the air drag force of untreated yarn decreased while that of plasma-treated ones on average increased gradually. The average growth rates of the drag force under each humidity were 5.33, 7.58, 10.08 and 12.28% respectively. Meanwhile, the air drag force of the yarns treated at different specific input energy (SIE) densities and treatment time varied obviously under different flow humidity. The X-ray photoelectron spectroscopy analysis was performed to characterize the yarn surfaces chemically. The topology and roughness of PET yarns were measured by atomic force microscopy. The tensile test was carried out to characterize the mechanical strength. The ozone, nitrate and nitrite radicals and total organic carbon in tail gas of plasma were also analyzed. The maximal atomic concentration of N element on PET surface could reach 8.0%. The obtained results can improve the understanding of the property of long-lived reactive species from DBD plasma source generated at different SIE and the difference in PET surface etching and modification during remote treatment at different SIE. Moreover, the results also provide an experimental guideline for the improvement of weaving efficiency in air-jet weaving.     

Thermophilic Dry Methane Fermentation of Distillation Residue Eluted from Ethanol Fermentation of Kitchen Waste and Dynamics of Microbial Communities

Thermophilic dry methane fermentation is advantageous for feedstock with high solid content. Distillation residue with 65.1 % moisture content was eluted from ethanol fermentation of kitchen waste and subjected to thermophilic dry methane fermentation, after adjusting the moisture content to 75 %. The effect of carbon to nitrogen (C/N) ratio on thermophilic dry methane fermentation was investigated. Results showed that thermophilic dry methane fermentation could not be stably performed for >10 weeks at a C/N ratio of 12.6 and a volatile total solid (VTS) loading rate of 1 g/kg sludge/d; however, it was stably performed at a C/N ratio of 19.8 and a VTS loading rate of 3 g/kg sludge/d with 83.4 % energy recovery efficiency. Quantitative PCR analysis revealed that the number of bacteria and archaea decreased by two orders of magnitude at a C/N ratio of 12.6, whereas they were not influenced at a C/N ratio of 19.8. Microbial community analysis revealed that the relative abundance of protein-degrading bacteria increased and that of organic acid-oxidizing bacteria and acetic acid-oxidizing bacteria decreased at a C/N ratio of 12.6. Therefore, there was accumulation of NH₄ ⁺ and acetic acid, which inhibited thermophilic dry methane fermentation.     

A Method for Microalgae Proteomics Analysis Based on Modified Filter-Aided Sample Preparation

With the fast development of microalgal biofuel researches, the proteomics studies of microalgae increased quickly. A filter-aided sample preparation (FASP) method is widely used proteomics sample preparation method since 2009. Here, a method of microalgae proteomics analysis based on modified filter-aided sample preparation (mFASP) was described to meet the characteristics of microalgae cells and eliminate the error caused by over-alkylation. Using Chlamydomonas reinhardtii as the model, the prepared sample was tested by standard LC-MS/MS and compared with the previous reports. The results showed mFASP is suitable for most of occasions of microalgae proteomics studies.     

Expression and Enzyme Activity Detection of a Sepiapterin Reductase Gene from <Emphasis Type="Italic">Musca domestica</Emphasis> Larva

Tetrahydrobiopterin (BH4) is an essential cofactor for aromatic acid hydroxylases and nitric oxide synthase. Sepiapterin reductase (SPR) catalyzes the final steps of BH4 biosynthesis. Studies on SPR from several insects and other organisms have been reported. However, thus far, enzyme activity of SPR in Musca domestica is kept unknown. In this study, 186 differentially expressed genes including SPR gene from Musca domestica (MDSPR) were screened in subtractive cDNA library. The MDSPR gene was cloned, and the recombinant MDSPI16 protein was expressed as a 51-kDa protein in soluble form. The MDSPR exhibited strong activity to the substrate sepiapterin (SP). The values of V_max and K_m of the MDSPR for SP were 6.83 μM/min and 23.48 μM, and the optimum temperature and pH of MDSPR were 50 °C and 4.0, respectively. This study provides new hypotheses and methods for the production of BH4 using insect-derived SPR.     

Decomposition and Debromination of Monobromoacetic Acid by Radio Frequency Discharge in an Aqueous Solution

In this study, efficient decomposition and debromination of monobromoacetic acid (MBAA) induced by radio frequency discharge in an aqueous solution in the concentration range from 0.1 to 8.0 mM were investigated. The decomposition and debromination intermediate byproducts were analyzed by ion chromatography. The experimental results showed that the decay of MBAA followed first-order kinetics. Increasing pH and adding organic additives to the solution enhanced MBAA removal and debromination. Acetic acid, bromate ion, oxalic acid and formic acid were determined as the major intermediate byproducts. Final products were bromide ion and carbon dioxide. Hydrated electrons are the primary species for the debromination and reactive oxygen species are the ones for the decomposition. A probable reaction pathway was proposed. The present study may provide a promising alternative for the complete mineralization of MBAA.     

Three-dimensionally ordered macroporous metal oxide–silica composite for removal of mercaptan

A series of 3DOM and non-3DOM metal oxide–silica composites were prepared and tested dynamically in a packed-bed reactor at room temperature to remove ethanethiol from a gas stream containing ethyl mercaptan in moist N_2.The obtained sorbents were characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption–desorption techniques. The experimental results showed that the adsorption ability of different kinds of metal oxide–silica composites with 3DOM structure decreased in the sequence: 3D-CuO/SiO₂ > 3D-NiO/SiO₂ > 3D-Co₃O₄/SiO₂ > 3D-ZnO/SiO₂. The best ratio of CuO to SiO₂ of 3DOM copper–silicon oxide sorbents for ethanethiol removal was found to be 1:2. The 3DOM structure could improve the removal activity of sorbents remarkably because of the high porosity with ordered interconnected macropores as well as the large surface area and high dispersion of CuO. It was also found that a moist atmosphere greatly benefited the adsorption of ethanethiol at ambient condition.     

Ag@AgCl embedded on cellulose film: a stable,highly efficient and easily recyclable photocatalyst

In this work, cellulose–Ag@AgCl composite films have been fabricated directly through a one-step coagulation of a cellulose/1-butyl-3-methylimidazolium chloride (BmimCl) solution with AgNO₃ and PVP. The AgCl was formed upon the addition of AgNO₃ to a cellulose/BmimCl solution, and underwent further reaction with excess Cl^?, leading to the complete dissolution of AgCl. The AgCl crystals were regenerated on the cellulose matrix during the coagulation process. The AgCl was partial decomposed to Ag⁰ and formed Ag@AgCl under visible light irradiation. The morphology of Ag@AgCl in the cellulose matrix was controlled by varying the concentration of PVP. The addition of PVP enabled the formation of stable cellulose films embedded with Ag@AgCl. The composite film demonstrated efficient photodegradation of methyl orange, which was retained upon recycling. This work thus provides a simple pathway for the preparation of Ag@AgCl embedded on a polymer support via one-step coagulation.