The Mechanical Properties,Compatibility, and Thermal Stabilities of POE-Graft-Methyl Methacrylate and Acrylonitrile(POE-g-MAN)/ Styrene-Acrylonitrile Copolymer (SAN Resin) Blends

POE-graft-methyl methacrylate and acrylonitrile (POE-g-MAN) was prepared by graft copolymerization of methyl methacrylate (MMA) and acrylonitrile (AN) onto polyethylene-octene copolymers (POE) with suspension polymerization. POE-g-MAN/SAN resin blends (AOMS) were prepared by blending POE-g-MAN with styrene-acrylonitrile copolymer (SAN resin). The mechanical properties, compatibility, and thermal stabilities of AOMS were studied. The notched impact strength of the blends reached 54.0 kJ/m² when the AN/(MMA + AN) ratio (f_AN) of POE-g-MAN, benzoyl peroxide dosage, and POE content in AOMS were 15 wt%, 1.0 wt%, and 25 wt%, respectively. Transmission electron microscopy analysis showed that the highest toughness occurred when the size of POE-g-MAN particles and the surface-to-surface inter-particle distance were proper. Scanning electron microscopy analysis indicated that the AOMS fracture surface had plastic flow visible, which looked like a fibril morphology when the AN/(MMA + AN) ratio (f_AN) of POE-g-MAN was 15 wt%. The toughening mechanism of AOMS was shear yielding of the matrix, which endowed AOMS with remarkable toughness. Dynamic mechanical thermal analysis showed that the compatibility of the POE phase and SAN phase improved after graft copolymerization of MMA and AN onto POE. When the grafting chain polarity was appropriate, the miscibility between POE-g-MAN and SAN resin was the best. Thermogravimetry analysis showed that thermal stability of AOMS increased with increasing AN units in POE-g-MAN.     

Influence of Mixing Technique on Microstructure and Impact Properties of Isotactic Polypropylene/ Poly(Cis-Butadiene) Rubber Blends

Isotactic polypropylene/poly(cis-butadiene) rubber (iPP/PcBR vol%: 80/20) blends were prepared by melt mixing with various mixing rotation speeds. The effect of mixing technique on microstructure and impact property of blends was studied. Phase structure of the blends was analyzed by scanning electron microscopy (SEM). All of the blends had a heterogeneous morphology. The spherical particles attributed to the PcBR-rich phase were uniformly dispersed in the continuous iPP matrix. With increase of the mixing rotation speed, the dispersed phase particle's diameter distribution became broader and the average diameter of the separated particles increased. The spherulitic morphology of the blends was observed by small angle light scattering (SALS). Higher mixing rotation speed led to a more imperfect spherulitic morphology and smaller spherulites. Crystalline structure of the blends was measured by wide angle X-ray diffraction (WAXD) and small angle X-ray scattering (SAXS). The introduction of 20 vol% PcBR induced the formation of iPPβ crystals. Higher rotation speed led to a decrease in microcrystal dimensions. However, the addition of PcBR and the increase of mixing rotation speed did not affect the interplanar distance. The long period values were the same within experimental error as PcBR was added or the mixing rotation speed quickened. The normalized relative degree of crystallinity of the blends slightly increased under lower rotation speeds (30 and 45 rpm) and decreased under higher rotation speeds. The notched Izod impact strength of the blends was enhanced as a result of the increase of mixing rotation speed.     

Isothermal Crystallization Kinetics and Melting Behavior of a Luminescent Conjugated Polymer,Poly(9,9-Dihexylfluorene-Alt-2,5-Didodecyloxybenzene)

A study of the isothermal crystallization behaviors of poly(9,9-dihexylfluorene-alt-2,5-didodecyloxybenzene) (PF6OC12) was carried out using differential scanning calorimetry (DSC). The crystallization kinetics under isothermal conditions could be described by the Avrami equation. The Avrami exponent n ranges from 3.43 to 3.71 for PF6OC12 at crystallization temperatures between 100.0°C and 90.0°C, indicating a three-dimensional spherical crystal growth with homogeneous nucleation in the primary crystallization stage for the isothermal melt crystallization process. In the DSC scan, after the isothermal crystallization, multiple melting behavior was found. The multiple endotherms could be attributed to melting of recrystallized materials produced originally during different crystallization processes. According to the Arrhenius equation, the activation energy was determined to be 211.29 kJmol^?1 for the isothermal melt crystallization of PF6OC12.     

Structural and Tribological Properties of Polytetrafluoroethylene Composites Filled with Glass Fiber and Al2O3 in Atomic Oxygen Environment

Effects of atomic oxygen (AO) irradiation on the structural and tribological behaviors of polytetrafluoroethylene (PTFE) composites filled with both glass fibers and Al₂O₃ were investigated in a ground-based simulation facility, in which the average energy of AO was about 5 eV and the flux was 5.0 × 10¹⁵/cm² s. It was found that AO irradiation first induced the degradation of PTFE molecular chains on the sample surface, and then resulted in a change of surface morphology. The addition of Al₂O₃ filler significantly increased the AO resistance property of PTFE composites. Friction and wear tests indicated that AO irradiation affected the wear rate and increased the friction coefficient of specimens. The PTFE composite containing 10% Al₂O₃ exhibit the best AO resistance and lower wear rate after long time AO irradiation.     

Graft Polymerization of Methyl Methacrylate- Acrylonitrile onto Poly(ethene-co-1-butene) and Its Toughening Effect on SAN Resin

Poly(ethene-co-1-butene)-graft-methyl methacrylate-acrylonitrile (PEB-g-MAN) was prepared by suspension grafting copolymerization of methyl methacrylate (MMA) and acrylonitrile(AN) onto PEB. PEB-g-MAN/SAN resin blends (ABMS) were prepared by blending PEB-g-MAN with styrene-acrylonitrile copolymer (SAN resin). The effects of AN/(MMA+AN) feed ratio (f_AN), PEB/(PEB+MMA+AN) feed ratio (f_PEB) and benzoyl peroxide (BPO) dosage on the monomer conversion ratio (CR), rubber's grafting ratio (GR), grafting efficiency (GE) of the copolymerization and the toughening effect of PEB-g-MAN on the SAN resin were investigated. FTIR quantitative analysis showed that when the weight percent of AN unit in the unextracted product was 21.5 wt% with f_AN of 25 wt%, the toughening effect of unextracted PEB-g-MAN on SAN resin was the highest. Gel permeation chromatography (GPC) analysis showed that when f_AN was 25 wt%, the grafted copolymer had the lowest molecular weight and ABMS had highest toughness. Transmission electron microscopy (TEM) analysis showed that the highest toughness occurred when the phase structure of ABMS was cocontinuous with f_AN of 25 wt%. When f_AN was 25 wt% PEB-g-MAN domains have numerous small SAN domains in them, which was occlusion structure. Scanning electron microscopy (SEM) analysis indicated that the ABMS fracture surfaces had plastic flow visible, which looked like a craze fibers morphology, for the sample with highest impact strength (f_AN = 25 wt%). Dynamic mechanical thermal analysis (DMA) showed that the miscibility of the PEB phase and SAN phase improved after graft copolymerization of MMA and AN onto PEB.     

Properties of Natural Rubber Vulcanizates/Nanosilica Composites Prepared Based on the Method of In-situ Generation and Coagulation

Using the characteristics of silica sol dispersing well in water and easy formation of silica gel when the silica sol is heated, by mixing a system of concentrated natural rubber latex and silica sol, the silica sol can in-situ generate SiO₂ particles when heated. After coagulation of the mixed system, natural rubber/nanosilica composites C(NR/nSiO₂) were obtained. The composites C(NR/nSiO₂) and their vulcanizates were studied using a rubber processing analyzer (RPA), dynamic mechanical analysis (DMA), and scanning electron microscopy (SEM). The influence of silica contents on the C(NR/nSiO₂) vulcanizates mechanical properties, cross-linking degree, Payne effect, dissipation factor (tanδ), and the particle size and dispersion of SiO₂ in NR were investigated. The results obtained were compared with the NR/SiO₂ composites based on traditional dry mixing of bale natural rubber and precipitated silica (white carbon black). The results showed that when using a sulfur curing system with a silica coupling agent (Si69) in C(NR/nSiO₂), the vulcanizate had better mechanical properties, higher wet resistance, and lower rolling resistance than those without Si69. In the composites C(NR/nSiO₂) and their vulcanizates, the SiO₂ particles’ average grain diameter was 60 nm, and the good-dispersion of the in-situ generated SiO₂ in the rubber matrix were a significant contribution to the satisfactory properties of C(NR/nSiO₂) composites and their vulcanizates.     

Interaction of Moxifloxacin with Bovine Hemoglobin and Effect of the Coexistent Drugs on the Reaction

The interaction between moxifloxacin (MXFX) and Bovine Hemoglobin (BHb) was investigated at different temperatures by fluorescence spectroscopy. Results showed that the quenching mechanism of MXFX on BHb was a static quenching process with Förester spectroscopy energy transfer. The primary binding for MXFX was located at β-37 Tryptophan residue in hydrophobic cavity of BHb. Besides, weak negative cooperativity was found in drug's binding with BHb. Synchronous spectra revealed that the microenvironment and the conformation of serum albumin were changed during the reaction. Most antibiotics had no effect on the system of BHb-MXFX, except quinolone antibiotics. The system had good stability.     

Binding Study of Phenformin with Bovine Serum Album Using a Combined Technique of Equilibrium Dialysis with Flow-Injection Chemiluminescence Detection

ABSTRACT

The interaction between phenformin hydrochloride and bovine serum albumin (BSA) was investigated by the methods of chemiluminescence combined with equilibrium dialysis technique. A novel N-bromosuccinimide (NBS)–eosin Y (EY) chemiluminescence (CL) method was established for the determination of phenformin. The mechanism of this chemiluminescence system was proposed. Optimization studies were performed to determine the phenformin. Under the optimal conditions, the CL intensity was linear for a phenformin concentration over the range of 4.6 × 10^?8 to 5.0 × 10^?5 g/mL. The detection limit was 1.5 × 10^?8 g/mL. The data obtained by the present equilibrium dialysis–CL system were analyzed using the Klotz plot and the Scatchard analysis. The results showed that the Klotz plot and the Scatchard plot are linear with good correlation coefficient, indicating that the phenformin has only one type of binding site on BSA. The binding parameters were the number of the binding sites n (1.02) and the estimated association constant K (2.66 × 10⁴ L/mol). The chemiluminescence system combined with equilibrium dialysis developed in this work demonstrated its use for determination of interaction between drug and protein by using relatively simple instrument.     

A Novel Pyrene Fluorescent Sensor Based on the π–π Interaction Between Pyrene and Graphene of Graphene–Cadmium Telluride Quantum Dot Nanocomposites

In this article, water-soluble graphene–cadmium telluride quantum dot nanocomposites were fabricated through the synthesis of cadmium telluride quantum dots in the presence of graphene aqueous dispersion. It was found that pyrene could remarkably quench fluorescence of graphene–cadmium telluride quantum dot nanocomposites. On this basis, a novel method for the determination of pyrene was developed. Factors affecting the pyrene detection were investigated, and the optimum conditions were determined. Under the optimum conditions, a linear relationship could be established between the quenching of fluorescence intensity of graphene–cadmium telluride quantum dot nanocomposites and the pyrene concentration in the range of 6.00 × 10^?8–2.00 × 10^?6 mol L^?1 with a correlation coefficient of 0.9959. The detection limit was 4.02 × 10^?8 mol L^?1. Furthermore, the nanocomposites were applied to practical determination of pyrene in different water samples with satisfactory results.