Direct STM investigation of cinchona alkaloid adsorption on Cu(III)

Scanning tunneling microscopy (STM) combined with cyclic voltammetry has been employed to investigate the adsorption of cinchonine on Cu(111). Similar to cinchonidine, cinchonine forms a long-range ordered adlayer with (4 x 4) symmetry on the substrate. The structural details on molecular adsorption were obtained by high-resolution STM images. On the basis of the previous results and obtained STM images, the quinoline ring is proposed to lie parallel to Cu(111) and serve as an anchoring group. The chiral quinuclidine moiety extends out of the surface to facilitate the interaction with the prochiral reactants.     

Non-covalent reconfigurable microgel colloidosomes with a well-defined bilayer shell

Microgels are extremely interfacially active and are widely used to stabilize emulsions. However, they are commonly used to stabilize oil-in-water emulsions due to their intrinsic hydrophilicity and initially dispersed in water. In addition, there have been no attempts to control microgel structural layers that are formed at the interface and as a result it limits applications of microgel in advanced materials. Here, we show that by introducing octanol into poly(N-isopropylacrylamide-co-methacrylic acid) (PNIPAM-co-MAA) microgels, octanol-swollen microgels can rapidly diffuse from the initially dispersed oil phase onto the water droplet surface. This facilitates the formation of microgel-laden interfacial layers with strong elastic responses and also generates stable inverse water-in-oil Pickering emulsions. These emulsions can be used as templates to produce microgel colloidosomes, herein termed ‘microgelsomes’, with shells that can be fine-tuned from a particle monolayer to a well-defined bilayer. The microgelsomes can then be used to encapsulate and/or anchor nanoparticles, proteins, vitamin C, bio-based nanocrystals or enzymes. Moreover, the programmed release of these substances can be achieved by using ethanol as a trigger to mediate shell permeability. Thus, these reconfigurable microgelsomes with a microgel-bilayer shell can respond to external stimuli and demonstrate tailored properties, which offers novel insights into microgels and promise wider application of Pickering emulsions stabilized by soft colloids.

Inverse W/O Pickering emulsions and reconfigurable microgelsomes with a well-defined bilayer structure are prepared from octanol-swollen PNIPAM-co-MAA microgels and the combination of binary microgels, which promise wider application of soft colloids.     

Level Statistics Crossover of Chiral Surface States in a Three-Dimensional Quantum Hall System

Recent experiments have demonstrated the realization of the three-dimensional quantum Hall effect in highly anisotropic crystalline materials, such as ZrTe|_5 and BaMnSb_2. Such a system supports chiral surface states in the presence of a strong magnetic field, which exhibit a one-dimensional metal-insulator crossover due to suppression of surface diffusion by disorder potential. We study the nontrivial surface states in a lattice model and find a wide crossover of the level-spacing distribution through a semi-Poisson distribution. We also discover a nonmonotonic evolution of the level statistics due to the disorder-induced mixture of surface and bulk states.     

Single-Ion Conduction and Electrochemical Characteristics of Poly (Oxyethylene)/ Lithium Methoxy Oligo(Oxyethylene) Sulfate Blend

Abstract

The ion conduction of a blend of poly(oxyethylene) (PEO) and lithium methoxy oligo(oxyethylene) sulfate (SAL₈) and its electrochemical characteristics were studied. The maximum ambient conductivity of the blend reaches 1.2 × 10^?6 S/cm. The blend exhibits single-ion conduction, excellent mechanical performance, and electrochemical stability. A battery of Li/PEO + SAL₈/Li_1+xV₃O₈ has a constant discharge capacity at different discharge current densities up to a certain voltage, while the discharge capacity of Li/P (MEO_16-AM) + LiClO₄/Li_1+xV₃O₈ decreases with an increase of the discharge current density.     

Surface-Modified Sb2S3 Nanoparticles and Their Tribological Behaviors in Liquid Paraffin

Sb₂S₃ nanoparticles surface-modified with S-tetradecyl N, N-dihydroxyethyl dithiocarbamate (C₁₄DTC-Sb₂S₃) have been synthesized via extraction of Sb₂S₃ colloidal particles from ethylene glycol into toluene in the presence of C₁₄DTC. The obtained products were characterized by high-resolution transmission electron microscope (HRTEM) and Fourier transformation infrared (FTIR), and their tribological behaviors as an additive in liquid paraffin were investigated using a four-ball tribometer. The results show that C₁₄DTC-Sb₂S₃ nanoparticles can significantly improve the friction reduction, anti-wear, and load-carrying properties of base oils. The preliminary lubrication mechanism was discussed based on the SEM and XPS investigation of the rubbed surfaces.     

Synthesis and mesomorphism of 4,4'-bis(omega-hydroxyalkoxy)-alpha-methylstilbenes

A homologous series of 4,4'-bis(omega-hydroxyalkoxy)-alpha-methylstilbenes, denoted HAMS-n, has been synthesized. Here n is the carbon atom length of the peripheral n-alkyl chain; in this work n = 2 to 8 and 11. The composition, microstructure, thermal properties, and mesomorphism of the homologues were determined using elemental analysis, ¹H NMR, FTIR, DSC, wide angle X-ray diffraction, and polarizing optical microscopy with a heating stage. The influence of the length and the even/odd numbers of methylene units of the peripheral chains on the variants of mesomorphism and the stability of mesophases, as well as on their transition temperatures, are discussed. The homologues with n = 8 and 11 were enantiotropic monomorphic, CrG (or CrH). The odd homologues showed monotropic trimorphism on cooling, while the even homologues exhibited enantiotropic trimorphism. A pronounced even/odd effect on the melting temperatures was observed.     

Naphthalene and benzene levels in microenvironments associated with potential exposure: new and old apartments with moth repellents,and cabins of passenger cars

A lesser degree of information is available with respect to microenvironments associated with potential exposure to naphthalene, in comparison with other volatile organic compounds. The current study investigated the levels of benzene as well as naphthalene, both in the indoor and outdoor air of apartments and in the cabins of passenger cars. Two groups of 20 apartment buildings (20 new and 20 old) were chosen on the basis of the selection criteria (apartment location and size). In addition, 10 actual commuters were recruited for this study. The equal number of drivers was recruited for the study for comparison of two types of fuels for vehicles (five drivers of gasoline-fuelled and five drivers of diesel-fuelled passenger cars). Indoor naphthalene concentrations were similar between old and new apartments, while the benzene concentrations in new apartments were significantly higher than those of old apartments. The naphthalene concentrations in bedrooms, where wardrobes with moth repellent (MRs) were placed, were significantly higher than those for living rooms where no MRs were present. In turn, these indoor concentrations were significantly higher than outdoor levels. It is noteworthy that the mean and median values of naphthalene measured in the bedrooms exceeded the USEPA RfC (inhalation reference concentration) of 3?µg?m^?3, and the living room values were close to the RfC, while the residential benzene levels exceeded the European benzene limit of 5?µg?m^?3. In contrast, the maximum outdoor levels were well below that of the RfC. The use of passenger cars appeared to be a significant daily activity for both naphthalene and benzene exposure. The naphthalene-to-benzene ratios varied with the type of microenvironments. Both the indoor naphthalene and benzene concentrations in the present study were much higher than those of other studies.     

Exploring the Reactivity of Multicomponent Photocatalysts: Insight into the Complex Valence Band of BiOBr

The band structure of multicomponent semiconductor photocatalysts, as well as their reactivity distinction under different wavelengths of light, is still unclear. BiOBr, which is a typical multicomponent semiconductor, may have two possible valence‐band structures, that is, two discrete valence bands constructed respectively from O 2p and Br 4p orbitals, or one valence band derived from the hybridization of these orbitals. In this work, aqueous photocatalytic hydroxylation is applied as the probe reaction to investigate the nature and reactions of photogenerated holes in BiOBr. Three organic compounds (microcystin‐LR, aniline, and benzoic acid) with different oxidation potentials were selected as substrates. Isotope labeling (H₂¹⁸O as the solvent) was used to determine the source of the O atom in the hydroxyl group of the products, which distinguishes the contribution of different hydroxylation pathways. Furthermore, a spin‐trapping ESR method was used to quantify the reactive oxygen species (^.OH and ^.OOH) formed in the reaction system. The different isotope abundances of the hydroxyl O atom of the products formed, as well as the reverse trend of the ^.OH/^.OOH ratio with the oxidative resistance of the substrate under UV and visible irradiation, reveal that BiOBr has two separate valence bands, which have different oxidation ability and respond to UV and visible light, respectively. This study shows that the band structure of semiconductor photocatalysts can be reliably analyzed with an isotope labeling method.     

Practical and Highly Selective C?H Functionalization of Structurally Diverse Ethers

A trityl ion mediated C H functionalization of ethers with a wide range of nucleophiles at ambient temperature has been developed. The reaction displays high chemoselectivity and good functional group tolerance. The protocol also exhibits excellent regio‐ and diastereoselectivities for the unsymmetric ethers, thus stereoselectively generating highly functionalized disubstituted 2,5‐trans tetrahydrofurans (THF), 2,6‐trans tetrahydropyrans (THP), 2,6‐trans dihydropyrans (DHP), and 1,3‐trans isochromans, and highlighting the capacity of the protocol in complex molecule synthesis.