Preparation and surface modification of silicon nanowires under normal conditions

Preparation and surface modification of silicon nanowires (SiNWs) grown by the metal catalyzed solution method under normal conditions (room temperature, 1 atm) had been studied in this paper. Firstly, SiNWs using a simple solution method via electroless metal deposition (EMD) of silver under room temperature, standard pressure had been prepared. The influence of the growth parameters such as solution concentration, etching time on the SiNWs formation had been studied. Secondly, the surface modification of SiNWs with platinum and copper had been investigated. The results indicated that the SiNWs modified with Pt and Cu showed different surface morphologies. Pt modification on SiNWs presented in the form of nanoparticles, whereas Cu modification in the form of membrane. Therefore, the Pt modified SiNWs have more vast surface-to-bulk ratio than the unmodified ones, and SiNWs modified with copper nanoparticles will lead to the smaller surface-to-bulk ratio. So the platinum-modified SiNWs have a promising application in sensors’ field.     

Circular polarized electronically-controlled antenna array based on CRLH-TL

In this paper, a circular polarized electronically-controlled scanning microstrip antenna array is designed, which is based on composite right left-handed transmission line (CRLH TL) and is realized by varactor diodes. Proposed electronically-controlled antenna arrays till now are always linear-polarized as the axial ratio (AR) may be spoiled by the DC feed line, especially in the CRLH TL based case. A more separated CRLH TL integrated with active lumped elements is utilized to solve the problem. The antenna array is composed of the CRLH microstrip transmission line structure and circular polarized microstrip antenna. The direction of the main lobe varies from ?1° to ?20 ° by continuously modifying the varactor diodes bias voltages from 0 to 20 V with 5 V as a step. The AR remains below 3 dB in the scanning range. The simulation and experimental results show a good consistence.     

Effect of solvent on directional drift in Brownian motion of particle/molecule with broken symmetry

The directional drifting of particles/molecules with broken symmetry has received increasing attention. Through molecular dynamics simulations, we investigate the effects of various solvents on the time-dependent directional drifting of a particle with broken symmetry. Our simulations show that the distance of directional drift of the asymmetrical particle is reduced while the ratio of the drift to the mean displacement of the particle is enhanced with increasing mass, size, and interaction strength of the solvent atoms in a short time range. Among the parameters considered, solvent atom size is a particularly influential factor for enhancing the directional drift of asymmetrical particles, while the effects of the interaction strength and the mass of the solvent atoms are relatively weaker. These findings are of great importance to the understanding and control of the Brownian motion of particles in various physical, chemical, and biological processes within finite time spans.     

Measurement of 129Xe frequency shift due to Cs–129Xe collisions

Enhancement factor K0, which characterizes NMR and EPR frequency shifts for Cs-129Xe, is measured for the first time. The enhancement factor r-o was measured to be （702±41） at 80 ℃ and （653±20） at 90 ℃, using the NMR frequency shift, detected by atomic magnetometer at a low magnetic field of 100 nT. This result is useful for predicting the EPR frequency shifts for Cs and the NMR frequency shifts for 129Xe in spin-exchange cells.     

Material growth and device fabrication of terahertz quantum-cascade laser based on bound-to-continuum structure

The terahertz quantum-cascade laser （THz QCL） based on bound-to-continuum structure is demonstrated. The X-ray diffraction measurement of the material shows a high crystalline quality of the active region. A THz QCL device was fabricated with semi-insulating surface-plasmon waveguide. The test device is lasing at about 3 THz and operating up to 60 K. It shows a single frequency property under different drive currents and temperatures. At 9 K, the maximum output power is greater than 2 mW with a threshold current density of 159 A/cm2.     

X-ray diffraction studies on crystallite size evolution of CoFe2O4 nanoparticles prepared using mechanical alloying and sintering

Nanosized cobalt ferrite spinel particles have been prepared by using mechanically alloyed nanoparticles. The effects of various preparation parameters on the crystallite size of cobalt ferrite which includes milling time; ball-to powder weight ratio (BPR) and sintering temperature, were studied using X-ray diffractometer (XRD). Scherrer's equation was used to study the crystallite size evolution of the as-prepared materials. The results of the as-milled sample revealed that both milling time and BPR plays a role in determining the crystallite size of the milled powder. However, where sintering is involved, the sintering temperature results in grain growth, and thus plays a dominant role in determining the final crystallite size of the samples sintered at higher temperature (above 900 °C). From the vibrating-sample magnetometer (VSM) measurement it was observed that the coercivity of the as-milled samples without sintering is almost negligible, which is a type characteristic of superparamagnetic material. However, for the sintered samples, the saturation increases while coercivity decreases with increases sintering temperature.     

Synthesis of nanosized Si composite anode material for Li-ion batteries

A simple method was proposed to prepare nanosized Si composite anode materials for lithium-ion (Li-ion) batteries. The preparation started with the shock-type ball milling of silicon in liquid media of polyacrylonitrile (PAN)/dimethylformamide (DMF) solution, forming slurry where the nano-Si particles were uniformly dispersed, followed by the drying of the slurry to remove DMF. The nanosized Si composite anode material was obtained after the pyrolysis of the mixture at 300 °C where the pyrolyzed PAN provided a conductive matrix to relieve the morphological change of Si during cycling. As-prepared composite presented good cyclability for lithium storage. The proposed process paves an effective way to prepare high performance Si, Sn, Sb and their alloys based composite anode materials for Li-ion batteries.     

Effects of nanostructure on optoelectronic properties of β phase polyoctylfluorene thin film

β phase polyoctylfluorene thin films were obtained by exposure to toluene vapor for various annealing times or dipping into a THF/methanol mixture. The photoluminescence and electroluminescence of PFO thin films decrease with increasing annealing time. Grazing incident X-ray diffraction of the thin films indicates that more and larger β phase crystallites will be generated in thin film exposed for longer time, which will lead to more defects that reduce photoluminescence and electroluminescence. By analyzing the mechanism of formation of β phase, we assume that the defects mainly come from the formation of out-of-plane crystalline structure. The assumption is confirmed by higher photoluminescence of β phase polyoctylfluorene thin film achieved by dipping into a THF/methanol mixture that has less out-of-plane crystalline structure.     

高温超导微带线的传输特性和设计考虑

利用唯象损耗等效法和宏观唯象模型来分析高温超导微带传输线的传输特性。宏观唯象模型克服了传统二流体模型不适用于高温超导体的缺点,使计算结果符合测量值。本文给出了高温超导体YBCO微带传输线的传输特性计算结果,可见其衰减及色散都很小。因此结合唯像损耗等效法和宏观唯象模型可以使高温超导微带线的设计精度有很大提高。     

高蛋白食物—螺旋藻

螺旋藻为原核生物。其所含蛋白质的质量和数量均为植物世界之冠;尚含各种维生素和生长因子;细胞壁易被人体消化;风味可口;无毒性。