High Pressure Synthesis of Cycloadduct of Fullerene C60 with 2H-Pyran-2-one∗∗

Under high pressure conditions, fullerene C₆₀ smoothly reacts with 2H-pyran-2-one to give a [4+2] cycloadduct, which can be reduced to an alcohol derivative.

     

Fatty amides synthesized from vegetable oil as extractant of molybdenum(VI)

In this study, fatty amides (FAs) synthesized from palm olein were used to extract and separate Mo(VI) from acidic media. Effects of various parameters upon the separation of Mo(VI) from Co(II), Ni(II), Al(III) and Mn(II), including extractant concentration, metal ion concentration, contact time, diluent, and acidity, were investigated. It was found that Mo(VI) was successfully separated from the above commonly associated metal ions by stripping from the loaded organic phase. Different acidic and alkaline solutions were used. Ammonium hydroxide solution was an optimal. Extraction of Mo(VI) into the organic phase involved the formation of 1:3 complexes. This work presents the development of a low-cost and environmentally friendly extractant to recycle and recover molybdenum.     

New heterocyclic metallomesogens: synthesis,mesomorphic and thermal behaviours of Cu(II) complexes with 1,2,3-triazole-based Schiff bases ligands

Two series of new Cu(II) complexes derived from the reaction of copper acetate with the non-linear 1,2,3-triazole-based Schiff bases have successfully been synthesised. The structures of the ligands and its complexes were elucidated by elemental analysis, FT-IR, ¹H-NMR and UV–visible spectroscopic techniques. The differential scanning calorimetry and polarizing optical microscopy supported the anisotropic properties of uncoordinated ligands in which the focal conic fan-shaped texture and/or broken fan-shaped texture characteristics of respective SmA and SmC phases were recorded. However, not all of their corresponding Cu(II) complexes are mesogenic. Although the iodo-substituted ligands with even parity C₁₀H₂₉ to C₁₄H₃₃ are non-stable and exhibit SmA phase which is not reproducible, the ultimate Cu(II) complexes show exclusively stable SmA phase. This observation can be ascribed to the enhanced colinearity and molecular anisotropic by the presence of Cu-N and Cu-O coordination modes. On the other hand, the comparison studies show that different positions of ortho-hydroxyl group affect the mesomorphic and thermal behaviour of ligands and Cu(II) complexes.     

Diffraction effects in planar wave-sphere interaction

Using the classical Mie scattering theory,we compute the energy density of an arbitrary partial wave(e.g.,the nth order) and then determine that the interaction between an incident planar wave and a sphere of radius a is the one between the sphere and those partial waves the order of which satisfies n≤ka.We also provide a simple expression to describe the diffracted wave in which the angle-dependent functions are employed.The difference between the accurate and the approximate expressions is demonstrated by numerical calculation.     

Electron Spin Resonance Study of the Solvent Effect on the Conformation of Some Iminoxy Radicals

The reaction of nitrogen dioxide with carbonyl compounds having a methylene or vinyl group adjacent to the corbonyl leads to the formation of stable iminoxy radicals^1-3. Evidence^1,2,4 has been presented that the precursor of these iminoxy radicals is probably the corresponding oxime formed by rearrangements of the intermediate nitroso compounds. There have also been reports on the e.s.r. detection of some cis-trans isomers of some iminoxy radicals in methanol or in neat liquid^1,5. We wish to report here a drastic solvent effect on the conformations of some iminoxy radicals formed by the reaction of NO₂ with trifluoroacetylacetone.     

Thermal and optical properties of highly fluorinated copolymers of methacrylates

Copolymers of pentafluorophenylhexafluoroisopropyl methacrylate (FPPMA) with trifluoroethyl methacrylate (TFEMA) were prepared in THF solution and in bulk using azobisisobutyronitrile as a free radical initiator. The monomer reactivity ratios of TFEMA (M₁) and FPPMA (M₂) were calculated as r₁ = 0.55 and r₂ = 0.07. The refractive indices of poly(TFEMA) and poly(FPPMA) are very similar as 1.435 and 1.430, respectively, at 532 nm, and the copolymer films were transparent. The glass transition temperatures (T_g) of the copolymers were in the range of 80–90°C and showed a negative deviation from the Gordon–Taylor equation. The thermal decomposition temperature (T_d) was increased with the content of FPPMA in copolymers. Low water absorption for 1:1 FPPMA/TFEMA copolymer was detected. Copolymers of FPPMA with hexafluoroisopropyl methacrylate (HFPMA) were also prepared. The monomer reactivity ratios of HFPMA (M₁) and FPPMA (M₂) were calculated as r₁ = 0.43 and r₂ = 0.10. The T_gs of the copolymers were in the range of 88–95°C and showed also a negative deviation from the Gordon–Taylor equation. T_g and T_d of the copolymers were increased with the content of FPPMA. The refractive index of poly(HFPMA) (1.384 at 532 nm) is much lower than that of FPPMA homopolymer, but copolymer films obtained were clear and transparent. Copyright © 2013 John Wiley & Sons, Ltd.     

Single-Ion Conduction and Electrochemical Characteristics of Poly (Oxyethylene)/ Lithium Methoxy Oligo(Oxyethylene) Sulfate Blend

Abstract

The ion conduction of a blend of poly(oxyethylene) (PEO) and lithium methoxy oligo(oxyethylene) sulfate (SAL₈) and its electrochemical characteristics were studied. The maximum ambient conductivity of the blend reaches 1.2 × 10^?6 S/cm. The blend exhibits single-ion conduction, excellent mechanical performance, and electrochemical stability. A battery of Li/PEO + SAL₈/Li_1+xV₃O₈ has a constant discharge capacity at different discharge current densities up to a certain voltage, while the discharge capacity of Li/P (MEO_16-AM) + LiClO₄/Li_1+xV₃O₈ decreases with an increase of the discharge current density.     

Identification of reducing and nonreducing neutral carbohydrates by laser‐enhanced in‐source decay (LEISD) MALDI MS

In this work, laser‐enhanced in‐source decay (LEISD) technique of matrix‐assisted laser desorption/ionization Fourier transform ion cyclotron resonance mass spectrometry (MALDI‐FT‐ICR‐MS) was used to distinguish reducing and nonreducing carbohydrates. Interestingly, easier cleavage of (1 → 2)‐linked glycosidic bonds for nonreducing carbohydrates containing D‐fructofuranosyl units was observed in MALDI‐FT‐ICR‐MS, which was in agreement with the result of theoretical calculation by the software package Gaussian 09. Importantly, no cross‐ring cleavage of fructofuranosyl residues was detected in the LEISD spectra of nonreducing carbohydrates. LEISD method therefore offers an attractive alternative for fast and efficient differentiation of reducing and nonreducing carbohydrates, and the positions of nonreducing monosaccharide residues in a carbohydrate chain could be easily speculated. Copyright © 2013 John Wiley & Sons, Ltd.     

Evaluating a four-directional benzene-centered aliphatic polyamine curing agent for epoxy resins

A four-directional benzene-centered aliphatic polyamine, MXBDP, with high functionality and low volatility, is used to cure epoxy resin (DGEBA). Herein we originally report the isothermal cure kinetics and dynamic mechanical properties of DGEBA/MXBDP. Differential scanning calorimetry confirms that MXDBP is more reactive than commercial linear metaxylenediamine and branched Jeffamine T-403 and the isothermal curing reaction is autocatalytic. The Kamal model is found to be able to well describe the curing rate up to the onset of diffusion control, and the excellent match over the whole conversion range is achieved using the extended Kamal model. Interestingly, the isoconversional kinetic analysis indicates that the effective reaction activation energy (E _α ) changes substantially with conversion, and ultimately decreases to a very small value (<10 kJ mol^?1) because of the diffusion-controlled reaction kinetics. Then, dynamic mechanical analysis reveals that DGEBA/MXBDP exhibits the higher α- and β-relaxation temperatures and the much higher crosslink density than DGEBA/metaxylenediamine. Our experiment results support that MXBDP has the high reactivity and improved thermal resistance in combination with the advantages of the high functionality, low volatility and decreased CO₂ absorption. Therefore, MXBDP may be especially suitable for room temperature-cure epoxy coatings and adhesives.