Intramolecular proton transfer in the isomerization of hydroxyacetone: Characterization based on reaction force analysis and the bond fragility spectrum

The mechanism of isomerization of hydroxyacetone to 2-hydroxypropanal is studied within the framework of reaction force analysis at the M06-2X/6-311++G(d,p) level of theory. Three unique pathways are considered: (a) a step-wise mechanism that proceeds through the formation of the Z-isomer of their shared enediol intermediate, (b) a step-wise mechanism that forms the E-isomer of the enediol, and (c) a concerted pathway that bypasses the enediol intermediate. Energy calculations show that the concerted pathway has the lowest activation energy barrier at 45.7 kcal mol⁻¹. The reaction force, chemical potential, and reaction electronic flux are calculated for each reaction to characterize electronic changes throughout the mechanism. The reaction force constant is calculated in order to investigate the synchronous/asynchronous nature of the concerted intramolecular proton transfers involved. Additional characterization of synchronicity is provided by calculating the bond fragility spectrum for each mechanism.     

Electroactive conducting polymers for corrosion control

There is an intensive effort underway to develop new corrosion control coatings for structural metals. In part, this effort has been motivated by the desire to replace chromium(VI)-containing coatings currently used for corrosion control of iron and aluminum alloys. Cr(VI) has been shown to be hazardous to the environmental and to human health, and its use in many countries will be sharply curtailed in the coming years. Electroactive conducting polymers (ECPs) represent a class of interesting materials currently being explored for use in corrosion control coating systems, possibly as a replacement for Cr(VI)-based coatings. The electroactivity and the electronic conductivity (or semiconductivity) of ECPs set them apart from traditional organic coatings. As with chromate, interesting and potentially beneficial interactions of ECPs with active metal alloys such as steel and aluminum are anticipated, with concomitant alteration of their corrosion behavior. A review of this active research area will be presented in two parts. Here in Part 1, a general introduction to the topic of corrosion control by ECPs will be presented, including an overview of corrosion and its control by traditional methods, an introduction to ECPs and their properties, and a discussion of the processing issues surrounding the use of ECPs as coatings. Part 1 also includes a review of the literature on the use of ECPs as coatings (or components of coatings) on non-ferrous active metals, principally aluminum and aluminum alloys, although some work on zinc, copper, silver, titanium and silicon will also be described. In Part 2 of this review (to be published in the next issue of this journal), the rather extensive literature on the use of ECPs for the corrosion control of ferrous alloys (steels) will be reviewed. Electronic Publication     

Biocatalytic synthesis of polymers. Synthesis of an optically active,epoxy-substituted polyester by lipase-catalyzed polymerization

The enantioselective polymerization of bis(2,2,2-trichloroethyl) trans-3,4-epoxyadipate with 1,4-butanediol using the enzyme porcine pancreatic lipase as a catalyst is described. The polymerization was carried out at ambient temperature in anhydrous ethyl ether. End group analysis provided M_N = 5,300 daltons, whereas GPC provided M_w = 7,900 daltons for the polymer. The unchanged (+)-enantiomer of the diester was shown to have an enantiomeric purity of > 95% by proton NMR in the presence of the chiral shift reagent Eu(hfc)₃. The stereochemical purity of the (?)-polymer was estimated at > 96% by consideration of the amount of the slower reacting enantiomer that could have been incorporated and still attain the observed degree of polymerization (25) when the starting ratio of racemic diester to diol was 2:1. Direct determination of the stereochemical purity of the polymer using Eu(hfc)₃ was unsuccessful. Similar studies on polymer having random stereochemical orientations of the epoxide showed that such polymers do not behave as if they are racemic in the presence of the shift reagent. The polymer required for the latter studies was prepared by epoxidation of the product from enzyme catalyzed polymerization of bis(2,2,2-trichloroethyl) trans-3-hexenedioate with 1,4-butanediol.     

Reaction development and mechanistic study of a ruthenium catalyzed intramolecular asymmetric reductive amination en route to the dual Orexin inhibitor Suvorexant (MK-4305)

The first example of an intramolecular asymmetric reductive amination of a dialkyl ketone with an aliphatic amine has been developed for the synthesis of Suvorexant (MK-4305), a potent dual Orexin antagonist under development for the treatment of sleep disorders. This challenging transformation is mediated by a novel Ru-based transfer hydrogenation catalyst that provides the desired diazepane ring in 97% yield and 94.5% ee. Mechanistic studies have revealed that CO(2), produced as a necessary byproduct of this transfer hydrogenation reaction, has pronounced effects on the efficiency of the Ru catalyst, the form of the amine product, and the kinetics of the transformation. A simple kinetic model explains how product inhibition by CO(2) leads to overall first-order kinetics, but yields an apparent zero-order dependence on initial substrate concentration. The deleterious effects of CO(2) on reaction rates and product isolation can be overcome by purging CO(2) from the system. Moreover, the rate of ketone hydrogenation can be greatly accelerated by purging of CO(2) or trapping with nucleophilic secondary amines.     

Amperometric Glucose Biosensor on Layer by Layer Assembled Carbon Nanotube and Polypyrrole Multilayer Film

An amperometric glucose biosensor on layer by layer assembled carbon nanotube and polypyrrole multilayer film has been reported in the present investigation. Homogeneous and stable single wall carbon nanotubes (SWNTs) and polypyrrole (PPy) multilayer films were alternately assembled on platinum coated Polyvinylidene fluoride (PVDF) membrane. Since conducting polypyrrole has excellent anti‐interference ability, protection ability in favor of increasing the amount of the SWNTs on platinum coated PVDF membrane and superior transducing ability, a layer by layer approach of polypyrrole and carbon nanotubes has provided an excellent matrix for the immobilization of enzyme. The layer‐by‐layer assembled SWNTs and PPy‐modified platinum coated PVDF membrane is shown to be an excellent amperometric sensor over a wide range of concentrations of glucose. The glucose oxidase (GOx) was immobilized on layer by layer assembled film by a physical adsorption method by cross linking through Glutaraldehyde. The glucose biosensor exhibited a linear response range from 1 mM to 50 mM of glucose concentration with excellent sensitivity of 7.06 μA/mM.     

The origin of open circuit voltage of porphyrin-sensitised TiO(2) solar cells

Electron lifetime and diffusion coefficient measurements in highly efficient porphyrin-sensitised TiO(2) solar cells showed reduced electron lifetime, and consequently, lower photo-induced electron density under illumination compared to commonly used ruthenium dye (N719)-sensitised solar cells, which is proposed to be the origin of the generally lower open circuit voltage.     

Electrochemical co-deposition of Ti n+ phases with gold in ionic liquids

The electro-deposition of titanium from two different classes of ionic liquids has been studied. Gold ions in solution have been used as an additive in order to provide a stable nucleation site for titanium to deposit on via a co-deposition process. Despite evidence from previous literature, it was found that it was not possible to reduce titanium from the +4 state to titanium (0) due to problems of redox cycling and solubility of reduced titanium species in the various ILs trialled. It was however found that gold was a very effective nucleating agent for these reduced titanium species and that successful mixed Ti(n+)/gold electro-deposits were obtained. The content of titanium in these species could be varied according to the conditions and IL used.     

Determining membrane capacitance by dynamic control of droplet interface bilayer area

By making dynamic changes to the area of a droplet interface bilayer (DIB), we are able to measure the specific capacitance of lipid bilayers with improved accuracy and precision over existing methods. The dependence of membrane specific capacitance on the chain-length of the alkane oil present in the bilayer is similar to that observed in black lipid membranes. In contrast to conventional artificial bilayers, DIBs are not confined by an aperture, which enables us to determine that the dependence of whole bilayer capacitance on applied potential is predominantly a result of a spontaneous increase in bilayer area. This area change arises from the creation of new bilayer at the three phase interface and is driven by changes in surface tension with applied potential that can be described by the Young-Lippmann equation. By accounting for this area change, we are able to determine the proportion of the capacitance dependence that arises from a change in specific capacitance with applied potential. This method provides a new tool with which to investigate the vertical compression of the bilayer and understand the changes in bilayer thickness with applied potential. We find that, for 1,2-diphytanoyl-sn-glycero-3-phosphocholine membranes in hexadecane, specific bilayer capacitance varies by 0.6-1.5% over an applied potential of ±100 mV.     

Two-dimensional like conjugated copolymers for high efficiency bulk-heterojunction solar cell application:Band gap and energy level engineering

Three two-dimensional like conjugated copolymers PFSDCN,PFSDTA and PFSDCNIO,which consist of alternating fluorene and triphenylamine main chain,and different pendant acceptor groups (malononitrile,1,3-diethtyl-2-thiobarbituric acid and 2-(1,2-dihydro-1-oxoinden-3-ylidene)malononitrile) with thiophene as π-bridge,have been designed,synthesized and characterized.The structure-property relationships of the two-dimensional like conjugated copolymers were systematically investigated.The absorption spectra,band g...     

Electro‐oxidation and reduction of H2 on platinum studied by scanning electrochemical microscopy for the purpose of local detection of H2 evolution

Electrochemical detection of H₂ using scanning electrochemical microscopy (SECM) has shown to hold great promise as a sensitive characterization method with high spatial resolution for active surfaces generating H₂. Herein, the factors contributing to the current that is measured by SECM in generation/collection mode for H₂ detection are studied. In particular, the concentration gradient of H₂ at the substrate, the H₂/H⁺ recycling between the SECM tip and substrate and hemispherical profile of H₂ diffusion has been discussed. It was postulated that H₂/H⁺ recycling plays a dominant role in the oxidative current measured in generation/collection mode of SECM when the microelectrode is positioned in close vicinity of substrate. Copyright © 2015 John Wiley & Sons, Ltd.