Polytypism in MX2 Compounds: A Case of Mixed Equilibrium Phases

Classical polytypism in MX₂-type compounds has been investigated. It has been established that polytypism can be understood, not as the case of independent stacking of A, B, or C layers but in terms of basic structural units, the most stable and only equilibrium phases of the given compounds. Other polytypes are formed only as a result of various equivalent positions that these units can take a given cell height. A criterion to predict whether a given compound would exhibit polytypism is also suggested. Several problems in applying ANNNI and other spin models to polytypism have been pointed out and a modified Hamiltonian is suggested.     

Optical characterization of xTiO2-(60 − x)SiO2-40Na2O glasses: II. Absorption edge, Fermi level, electronic polarizability and optical basicity

In the present work different optical properties of xTiO₂-(60 − x)SiO₂-40Na₂O (wt%) optical glasses are determined. The characterization is done over a wide energy range, 0.41-6.2 eV. The refractive index and the extinction coefficient data are used to measure the absorption coefficient of the different glass compositions. Studying the UV-absorption edge, both direct and indirect allowed transitions with their optical energy gaps are carried out. In the same time, the Urbach energy is evaluated. From the extinction coefficient data, the Fermi energy of the glasses is calculated. The molar refraction, electronic polarizability and the optical basicity are obtained using the measured glass refractive indices.     

Mode of layer displacements in MX2-type crystals

Using van der Waals potential, the relative strengths of interlayer and intralayer bonds have been estimated in the halides of cadmium and lead. The results have been compared with the recent Raman studies of rigid layer modes in MX₂-type layer compounds and X-ray diffraction studies of fused cadmium iodide. It is found that the interlayer bond is relatively much weaker than the intralayer bond. Accordingly, it is concluded that in the polytypic MX₂-type compounds CdI₂, CdBr₂ and PbI₂, only X-X glide takes place in the polytypic transformations observed during crystal growth and during high temperature treatment of the polytypes. The nature of the X-X glide has been examined in detail.     

Computer Simulations of the Formation of Bile Salt Micelles and Bile Salt/DPPC Mixed Micelles in Aqueous Solutions

Brownian dynamics simulations for a coarse-grained model have been performed to study the formation of micelles from bile salts and mixed micelles with dipalmitoyl-phosphatidylcholine (DPPC) in aqueous solutions. The particular association behavior of bile salts as facial surfactants was shown to be caused by their special molecular architecture with a hydrophilic and a hydrophobic side. The experimentally observed smooth transition into the micellar region with increasing concentration is reproduced. Micelle size distributions have been evaluated at different bile salt concentrations. Typical structures of pure bile salt micelles could be identified. The composition and the structure of mixed micelles have been studied in their dependence on the bile salt/lipid concentration ratio in the aqueous solution. We have found that the bile salt fraction in the mixed micelles increases considerably with increasing bile salt/lipid concentration ratio and decreasing micelle size. The structural and thermodynamic features of micelle formation in the aqueous bile salt solutions with DPPC, which we have studied with the coarse-grained model, are in good qualitative agreement with experimental findings.     

A Gas Chromatography‐Molecular Rotational Resonance Spectroscopy Based System of Singular Specificity

We designed and demonstrated the unique abilities of the first gas chromatography–molecular rotational resonance spectrometer (GC‐MRR). While broadly and routinely applicable, its capabilities can exceed those of high‐resolution MS and NMR spectroscopy in terms of selectivity, resolution, and compound identification. A series of 24 isotopologues and isotopomers of five organic compounds are separated, identified, and quantified in a single run. Natural isotopic abundances of mixtures of compounds containing chlorine, bromine, and sulfur heteroatoms are easily determined. MRR detection provides the added high specificity for these selective gas‐phase separations. GC‐MRR is shown to be ideal for compound‐specific isotope analysis (CSIA). Different bacterial cultures and groundwater were shown to have contrasting isotopic selectivities for common organic compounds. The ease of such GC‐MRR measurements may initiate a new era in biosynthetic/degradation and geochemical isotopic compound studies.     

Scanning electrochemical cell microscopy: A natural technique for single entity electrochemistry

Scanning electrochemical cell microscopy (SECCM) is a robust and versatile scanning electrochemical probe microscopy technique that allows direct correlation of structure–activity at the nanoscale. SECCM uses a mobile droplet cell to investigate and visualize electrochemical activity at interfaces with high spatiotemporal resolution, while also providing topographical information. This article highlights diverse contemporary challenges in the field of single entity electrochemistry tackled by the increasing uptake of SECCM globally. Various applications of SECCM in single entity electrochemistry are featured herein, including electrocatalysis, electrodeposition, corrosion science and materials science, with electrode materials spanning particles, polymers, two-dimensional materials and complex polycrystalline substrates. The use of SECCM for patterning structures is also highlighted.     

Phytochemical investigation of Gynura bicolor leaves and cytotoxicity evaluation of the chemical constituents against HCT 116 cells

Gynura bicolor (Compositae) is a popular vegetable in Asia and believed to confer a wide range of benefits including anti-cancer. Our previous findings showed that the ethyl acetate extract of G. bicolor possessed cytotoxicity and induced apoptotic and necrotic cell death in human colon carcinoma cells (HCT 116). A combination of column chromatography had been used to purify chemical constituents from the ethyl acetate and water extract of G. bicolor leaves. Eight chemical constituents 5-p-trans-coumaroylquinic acid (I), 4-hydroxybenzoic acid (II), rutin (III), kampferol-3-O-rutinoside (IV), 3,5-dicaffeoylquinic acid (V), kampferol-3-O-glucoside (VI), guanosine (VII) and chlorogenic acid (VIII) were isolated from G. bicolor grown in Malaysia. To our best knowledge, all chemical constituents were isolated for the first time from G. bicolor leaves except rutin (III). 3,5-dicaffeoylquinic acid (V), guanosine (VII) and chlorogenic acid (VIII) demonstrated selective cytotoxicity (selective index>3) against HCT 116 cancer cells compared to CCD-18Co human normal colon cells.     

Helical nanofibers of self-assembled bipolar phospholipids as template for gold nanoparticles

Bipolar phospholipids (bolalipids) represent an exciting class of amphiphilic molecules as they self-assemble in water to distinct structures of nanoscopic dimensions. Reported here are structural details of helical nanofibers, composed of achiral, symmetrical single-chain bolalipids with phosphocholine headgroups. These nanofibers are used as template for the fixation of gold nanoparticles (AuNPs) without prior functionalization. This realization of a metal array on bolalipid nanofibers is one of the rare examples of one-dimensional AuNP arrangements in solution. The loading and the heat of binding of AuNPs are determined applying transmission electron microscopy and isothermal titration calorimetry.     

Quadratic nonlinearity of one- and two-electron oxidized metalloporphyrins and their switching in solution

We report the quadratic nonlinearity of one- and two-electron oxidation products of the first series of transition metal complexes of meso-tetraphenylporphyrin (TPP). Among many MTPP complexes, only CuTPP and ZnTPP show reversible oxidation/reduction cycles as seen from cyclic voltammetry experiments. While centrosymmetric neutral metalloporphyrins have zero first hyperpolarizability, beta, as expected, the cation radicals and dications of CuTPP and ZnTPP have very high beta values. The one- and two-electron oxidation of the MTPPs leads to symmetry-breaking of the metal-porphyrin core, resulting in a large beta value that is perhaps aided in part by contributions from the two-photon resonance enhancement. The calculated static first hyperpolarizabilities, beta0, which are evaluated in the framework of density functional theory by a coupled perturbed Hartree-Fock method, support the experimental trend. The switching of optical nonlinearity has been achieved between the neutral and the one-electron oxidation products but not between the one- and the two-electron oxidation products since dications that are electrochemically reversible are unstable due to the formation of stable isoporphyrins in the presence of nucleophiles such as halides.     

Enhancement of 2-chlorophenol photocatalytic degradation in the presence Co<Superscript>2+</Superscript>-doped ZnO nanoparticles under direct solar radiation

The performance of Co²⁺-doped ZnO nanoparticles, prepared using the sol–gel method, for 2-chlorophenol degradation under direct solar radiation was investigated. Various parameters were investigated during the degradation process, namely solar intensity, Co²⁺ ion concentration, loading concentrations of Co²⁺-doped ZnO, and pH. The photocatalytic degradation efficiency increased when the initial concentration of 2-chlorophenol decreased; the optimum concentration was 50 mg/L under similar experimental conditions. Moreover, optimum values, established on a sunny day, were 0.75 wt% of Co²⁺, a 1 g/L loading concentration, and a pH of 6.0, respectively. The highest degradation efficiency observed was 95 %, after only 90 min of solar light irradiation. The mechanism of visible photocatalytic degradation using Co²⁺-doped ZnO was explained as a strong electronic interaction between Co²⁺, Co³⁺ and ZnO, and a promotion in the charge separation, which enhanced the degradation performance. The fragmentation of 2-chlorophenol under the optimal conditions was investigated using HPLC, comparing standards of all intermediate compounds. The pathway of the fragmentation was proposed as involving hydroxyhydroquinone, catechol, and phenol formation, which were then converted to non-toxic compounds such as oxalic acid and acetic acid with further decomposition to CO₂ and H₂O.