Synthesis, Structure and Optical Properties of Cerium(Ⅲ) Triphosphate CeP3O9

The single crystal and crystallized powder of triphosphate CeP3O9 have been synthesized, and the space group of CeP3O9 has been determined to be C2221 with the cell parameters ofa = 8.6059, b = 11.2437, c = 7.3518 (A), V= 711.4(3) (A)3, Z= 4, Dc = 3.520 g/cm3, F(000) = 700,R = 0.0377 and wR = 0.0930. The absorption and emission spectra have been measured, for which the strongest absorption and emission peaks are located at 280 and 320 nm, respectively. The density of state (DOS) and dielectric function have been calculated by the DFT method. The crystal is transparent provided the wavelength is larger than 341 nm, and the observed ultraviolet cut-off edge is at about 350 nm for a polycrystalline power sample. It is possible that the triphosphate CeP3O9 will become an ultraviolet emission material.     

Synthesis, Structure and Luminescence of a Novel 2D Cadmium Coordination Polymer with a Ligand Generated in situ

The hydrothermal reaction of 1,2-dicyanobenzene with NaN3 in the presence of Cd(NO3)2 affords a novel 2D cadmium tetrazolyl-benzoate,{Cd(tzbz)(H2O)}n (H2tzbz is 2-(5-tetrazolyl)-benzoate). The tzbz ligand is generated in situ through the 2+3 Sharpless cycloaddition reaction and hydrolyzation. Its crystal structure was determined by single-crystal X-ray diffraction method. The crystal crystallizes in the orthorhombic system,space group Pbca with a=9.6659(19),b=7.6366(15),c=25.964(5) ,V=1916.5(7) 3,Z=8,Mr=318.57,Dc= 2.208 g/cm3,F(000)=1232 and μ=2.276 mm-1. The Cd(Ⅱ) atom is coordinated by four tzbz ligands and one water molecule to form a severely distorted pentangle bipyramid. While each tzbz ligand connects to four Cd(Ⅱ) atoms in a μ4-η1,η2,η1,η1,η1 coordination mode to construct a 2D architecture of the title complex. Additionally,the title complex exhibits strong fluorescence at room temperature in the solid state.     

A Novel Hybrid Solid Constructed from Tetramolybdate and Copper Complexes with Mixed Ligands: [{(Cu·phen)2(tp)}{(Cu·phen·H2O)2(tp)}{Mo4O14}]

A novel copper molybdate with mixed ligands, [{(Cu·phen)2(tp)}{(Cu·phen·H2O)2(tp)}{Mo4O14}] (phen=1,10-phenanthroline, tp=terephthalate) 1, has been hydrothermally synthesized and structurally characterized. The crystal belongs to monoclinic system, space group P21/c with a=13.1711(7), b=19.6132(10), c=13.6910(7) (A), β=117.6870(10)°, V=3131.8(3)(A)3, Z=2, C64H44Cu4Mo4N8O24, Mr=1946.99, Dc=2.065 g/cm3, F(000)=1920, μ(MoKα) (A) 2.198 mm-1, R=0.0810 and wR=0.2012 for 4233 observed reflections (Ⅰ ＞ 2σ(Ⅰ)). The structural analysis indicates that the title compound contains a discrete tetramolybdate cluster decorated with copper complex fragments and tp ligands bridging the clusters into a wave-like layer. The hydrogen bonding between adjacent layers further extends the compound into a 3-D framework.     

Influence of Nucleation Agents Concentration on Crystallization Structure and Properties of Glass-ceramics

Deep color glass-ceramics is prepared by using gold tailings as the main raw material, and Cr2O3 is added as nucleation agent. Influence of different Cr2O3 additions on crystallization structure and properties of CaO-MgO-Al2O3-SiO2 glass-ceramics has been discussed so as to select optimum additions. DTA is employed to determine optimum crystallization and nucleation temperatures; XRD and SEM are used to characterize microstructure of each sample; and performance indexes, such as water absorption, bulk density, flexural strength and so on, are also determined. Experimental results show that when 3wt% Cr2O3 is introduced, fine glass-ceramics with diopside as the main crystal and Ca-Fe diopside as the second-crystal is obtained, and its corresponding performance indexes are as follows: water absorption 0.12%, bulk density 2.56 g/cm3, and flexural strength 70.01 Mpa.     

Influence of Fe2O3 and V2O5 on Crystalline Structure of Mg-Al Spinel Synthesized by Waste Aluminum Slag

Mg-Al spinel is synthesized by using industrial waste-residue and basic magnesium carbonate in the aluminum factory as the main raw materials. The influence of V2O5 and Fe2O3 mineralizers on the structure, cell parameters and microscopic morphology of synthesized Mg-Al spinel has been discussed. The Mg-Al spinel is characterized by using XRD, SEM and relevant analytical software, such as Philips plus, Rietveld quantification and so on. The experimental results show that certain amounts of V2O5 and Fe2O3 are beneficial to the formation of Mg-Al spinel, and the optimum addition of V2O5 and Fe2O3 is respectively 2wt% and 3wt%. V2O5 has few effects on cell parameters of Mg-Al spinel; but Fe2O3 can form solid solution with Mg-Al spinel in which Mg-Fe spinel can also dissolve to form continuous solid solution. Therefore, with the increase of Fe2O3 content, the cell parameters of Mg-Al approximately present linear increase.     

Studies on the Structure and Properties of Cordierite Synthesized by Talc-Magnesite

Homogeneous cordierite has been synthesized at low cost by talc-magnesite and coal gangue as the main raw materials. The mechanism of synthesizing cordierite under such a com- posing system of raw materials, and the effect of temperature on the crystal cell parameters and microstructure and thermal expansion coefficient of cordierite crystal have been studied via testing methods of XRD, SEM, etc. The result shows that the homogeneous cordierite can be synthesized by the systematic composing materials of “talc-magnesite—coal gangue—talc” with heat pre- servation at 1350 ℃ for 1 h; as the keeping time is prolonged, Al3+ and Mg2+ in cordierite crystal are replaced by a few impurity ions such as Fe3+, Fe2+, etc., and the crystal cell parameters of cordierite present an increase trend; as the high-temperature heat preservation is prolonged, the content of glassy phase in the sample is increased, its density is improved, and its thermal expansion coeffi- cient presents an increase trend.     

Structure and Aromaticity of AlCO-substituted Semibullvalene

The structures, energies and aromaticity (the nuclear-independent chemical shifts, NICS) of AlCO-substituted semibullvalenes were investigated at the B3LYP/6-311+G** level. Similar to BCO-substituted analogues, [2,6]-AlCO-semibullvalene is neutral bishomoaromatic. The NICS values reveal that the aromaticity of AlCO-substituted structures is smaller than that of BCO analogues.     

Growth, Band Structure and Optical Properties of LiSrBO3 Crystal

The bulk crystal of LiSrBO3 (8.39 g) with a size of 21mm×20mm×15mm was grown by high temperature solution growth method. The relationship between growth habit and crystal structure was discussed. The transmission spectrum shows an UV absorption edge at about 300 nm. The melting temperature of this crystal was determined to be 942 ℃ by DTA-TG measurement. The band structure of the LiSrBO3 crystal was studied by means of the first principle method. An indirect band gap was found to be about 4.0 eV,and a low dielectric constant was estimated to be about 1.9 in terms of theoretical results.     

基于离子迁移谱的假币用纸快速检测及溯源

该文采用离子迁移谱（IMS）对20种假币用纸进行分析,通过快速检测假币用纸中的可挥发性组分,构建假币用纸的指纹谱图库。基于主成分分析（PCA）和层次聚类分析（HCA）对迁移时间8～17.5 ms范围的迁移谱信息进行处理,从而对假币用纸进行分类。PCA可将同种假币用纸聚类,HCA则可进一步将20种假币用纸准确分类,其对6个未知来源的半成品假币的分类正确率达83.33%。结果表明,IMS快速检测分析是比较和分类假币用纸的有效方法。     

固相萃取/气相色谱-质谱法测定燃香烟气中9种大麻素类新精神活性物质

建立了同时测定燃香烟气中9种大麻素类新精神活性物质的气相色谱-质谱（GC-MS）分析方法。样品在燃香烟气收集装置中经溶剂提取,浓缩离心后,采用HLB固相萃取小柱净化,毛细管色谱柱Agilent HP-5MS毛细管柱（30 m×0.25 mm×0.25μm）分离,使用电子轰击电离（EI）源检测,SIM模式进行质谱监测,内标法对9种大麻素类化合物进行定量。结果表明,9种大麻素类化合物在27 min内完成分离分析,并在0.01～4.0 mg/L范围内具有良好的线性关系,相关系数（r2）均不小于0.999 5,方法的检出限（LOD,S/N=3）和定量下限（LOQ,S/N=10）分别为0.003～0.06 mg/L和0.01～0.2 mg/L。在阴性样品中进行1、2和10倍定量下限的加标回收实验,9种大麻素类化合物的回收率为74.8%～114%,相对标准偏差（RSD,n=6）为1.6%～9.1%。采用该方法对10种市售的燃香样品进行测定,均未检出大麻素类化合物。建立的方法操作简便,可快速对燃香烟气中大麻素类化合物进行定性和定量分析,且能满足发烟量大燃香的检测需求。该方法的建立为我国燃香中大麻素类...