A Rapid Solid-phase Synthesis to Soluble Oligothiophene Molecular Wires

A novel method for the preparation of oligothiophene molecular wires is described via a bi-directional solid-phase synthesis. Using an alternating sequence of bromination and Stille coupling reactions, oligomers were obtained up to the heptamer in excellent yield and purity.     

塑料闪烁体的辐照特性

利用⁶⁰Co放射源分别对3种塑料闪烁体(BC-408, EJ-200, BC-404)进行辐照损伤研究, 比较辐照前后的透射谱、发射谱及光产额的变化, 发现3种闪烁体在低剂量具有较好的抗辐照性能; 当照射剂量超过1.44×10⁴Gy时,透射谱明显变坏, 光输出减少很严重, 但发射谱却保持不变.     

Viscometric properties of dilute polystyrene/dioctyl phthalate solutions

We report viscometric data collected in a Couette rheometry on dilute, single‐solvent polystyrene (PS)/dioctyl phthalate (DOP) solutions over a variety of polymer molecular weights (5.5 × 10⁵ ≤ M_w ≤ 3.0 × 10⁶ Da) and system temperatures (288 K ≤ T ≤ 318 K). In view of the essential viscometric features, the current data may be classified into three categories: The first concerns all the investigated solutions at low shear rates, where the solution properties are found to agree excellently with the Zimm model predictions. The second includes all sample solutions, except for high‐molecular‐weight PS samples (M_w ≥ 2.0 × 10⁶ Da), where excellent time–temperature superposition is observed for the steady‐state polymer viscosity at constant polymer molecular weights. No similar superposition applies at a constant temperature but varied polymer molecular weights, however. The third appears to be characteristic of dilute high‐molecular‐weight polymer solutions, for which the effects of temperature on the viscosity curve are further complicated at high shear rates. The implications concerning the relative importance of hydrodynamic interactions, segmental interactions, and chain extensibility with increasing polymer molecular weight, system temperature, and shear rate are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 787–794, 2006     

非肯定型工程问题的 Petri 网方法

一项工程一般都包含着多道工序.如果知道了各工序的工期以及工序之间的衔接关系,就可以画出工程的流程图.从工序流程图可以求出完成这项工程的最短时间和每个工序的最晚必须开工时间,并确定主工序线.这样便于统筹安排,提高施工效率.这就是统筹方法.我们提出解决这类工程问题的另一种方法:Petri 网方法.在[2]中我们定义了一类含时间因素的 Petri 网,并用这种网及其可达标识图对肯定型工程问题进行了分析和讨论.本文作为[2]的续篇,我们用 Petri 网方法讨论和分析非肯定型工程问题.     

“选择资费”的多重价格歧视特性

本文在分析电信业选择资费实例和价格结构的基础上 ,研究了选择资费中的三级和二级价格歧视 ,并提出了多重价格歧视的概念 .研究结果表明 ,电信公司在选择资费中综合运用了三级、二级价格歧视 ,且通过提供多个二部资费计费方案 ,达到双重二级价格歧视和优化二部资费的目的 .选择资费是电信公司应对市场竞争的一种定价策略 ,认识其经济特性有利于我国电信公司和电信管制部门进行科学决策     

Robust Bayesian Inference for Seemingly Unrelated Regressions with Elliptical Errors

Bayesian inference is considered for the seemingly unrelated regressions with an elliptically contoured error distribution. We show that the posterior distribution of the regression parameters and the predictive distribution of future observations under elliptical errors assumption are identical to those obtained under independently distributed normal errors when an improper prior is used. This gives inference robustness with respect to departures from the reference case of independent sampling from the normal distribution.     

利用驻波实验研究混沌现象

利用驻波实验演示了混沌现象,并对其进行了理论分析和计算机仿真研究.仿真结果与实验结果都表明:当连接点接近驻波波节处时,振动系统处于混沌运动状态;而当连接点接近驻波波腹处时,系统处于稳定驻波运动状态.     

Some Results behind Dividend Problems

We consider the basic dividend problem of the compound Poisson model with constant barrierstrategy.Some results concealed behind the dividend problem are made explicit in the present work.Differentmethods and some of which are firstly given in this paper.All these results presented certain direct relationshipbetween some important actuary variables in classical risk theory is also revealed.     

两种蓝色有机电致发光材料

重点研究以两种蓝色OEL材料蒽类衍生物JBEM和联苯乙烯衍生物DPVBi分别作基质，以perylene作掺杂剂的器件的电致发光性能，特别研究了它稳定性，在这度和效率方面，两种器件并没有很大差别，然而在稳定性方面却有很大差别，蒽类衍生物JBEM的器件在100cd/m^2初始亮度下，半亮度寿命可达1035h，而DPVBi的器件在同样条件下，半亮度寿命为255h。通过分析两种器件的能级图，认为稳定性的差别可能源于两种蓝光材料本身的热稳定性不同，JBEM优于DPVBi，是一种很有前途的蓝色发光材料。     

新疆红景天红色素的提取及理化性质的研究

对用索氏提取法和乙醇浸取法提取红景天红色素进行了比较，并探讨浸取的浓度，浸取温度等因素，指出了最佳生产工艺条件，从红景天中提取的天红色素是一种安全无毒的食用色素，本文还研究了几种食品添加剂对红景天红色素稳定性的影响，并对色素的耐氧化性进行了探讨，旨在为红景天红色素的开发利用提供有实用价值的信息。