Mo/Si aperiodic multilayer broadband reflective mirror for 12.5-28.5-nm wavelength range

Aperiodic molybdenum/silicon (Mo/Si) multilayer designed as a broadband reflective mirror with mean reflectivity of 10% over a wide wavelength range of 12.5-28.5 nm at incidence angle of 5° is developed using a numerical optimized method. The multilayer is prepared using direct current magnetron sputtering technology. The reflectivity is measured using synchrotron radiation. The measured mean reflectivity is 7.0% in the design wavelength range of 12.5-28.5 nm. This multilayer broadband reflective mirror can be used in extreme ultraviolet measurements and will greatly simplify the experimental arrangements.     

羊八井50m2RPC实验及初步测试结果

介绍了羊八井50m²电阻板室(RPC)地毯实验的结构、安装和对其性能的初步测试.测试的结果表明RPC完全能够很好地在海拔4300m,气压594mbar的羊八井宇宙线观测站正常地运行.     

基于时延和相位估计的合成孔径声呐运动补偿研究

合成孔径声呐成象的难点之一在于孔径上载体的运动不稳定性影响了合成孔径上水听器接收的信号的相干性,其结果将导致图像的畸变和分辨率的降低。首先讨论了运动误差对合成孔径声呐(SAS)成像的影响及运动补偿的必要性。在分析位移相位中心运动补偿法的基础上,提出了一种改进算法。该方法首先估计时延,然后再对剩余误差进行相位估计,从而扩大了算法适用的运动误差范围。文中给出了利用该方法的计算机仿真结果和部分水池实验结果,从结果可以看出,该方法有效地修正了在合成孔径上由于介质和载体不稳定带来的不相干性,提高了成像的质量。     

Mo的引入方式对CeO2脱硝性能的影响

固定源排放的氮氧化物(NOx)导致了严重的环境污染问题,NH3选择性催化还原(NH3-SCR)被认为是目前控制NOx排放的最有效技术,已广泛应用于电力行业的烟气排放治理.然而,我国非电行业的NOx减排仍然面临着重大挑战,因为其排放的废气温度通常低于300oC,且含有一定量的SO2,传统的钒基SCR催化剂因活性温度(30...     

Native agarose gel electrophoresis and electroelution: A fast and cost‐effective method to separate the small and large hepatitis B capsids

Hepatitis B core antigen (HBcAg) expressed in Escherichia coli is able to self‐assemble into large and small capsids comprising 240 (triangulation number T = 4) and 180 (triangulation number T = 3) subunits, respectively. Conventionally, sucrose density gradient ultracentrifugation and SEC have been used to separate these capsids. However, good separation of the large and small particles with these methods is never achieved. In the present study, we employed a simple, fast, and cost‐effective method to separate the T = 3 and T = 4 HBcAg capsids by using native agarose gel electrophoresis followed by an electroelution method (NAGE‐EE). This is a direct, fast, and economic method for isolating the large and small HBcAg particles homogenously based on the hydrodynamic radius of the spherical particles. Dynamic light scattering analysis demonstrated that the T = 3 and T = 4 HBcAg capsids prepared using the NAGE‐EE method are monodisperse with polydispersity values of ～15% and ～13%, respectively. ELISA proved that the antigenicity of the capsids was not affected in the purification process. Overall, NAGE‐EE produced T = 3 and T = 4 capsids with a purity above 90%, and the recovery was 34% and 50%, respectively (total recovery of HBcAg is ～84%), and the operation time is 15 and 4 times lesser than that of the sucrose density gradient ultracentrifugation and SEC, respectively.     

Removal of oxygen from silicon by electron beam melting

Small amounts of multicrystalline silicon were melted in an electron beam furnace in different experimental conditions in order to investigate the oxygen evaporation behavior during the electron beam melting (EBM) process. The oxygen content level before and after EBM was determined by secondary ion mass spectroscopy. The oxygen content was reduced from 6.177 to 1.629 ppmw when silicon was melted completely at 15 kW with removal efficiency up to 73.6 %. After that, it decreased continually to <0.0517 ppmw when the refining time exceeded 600 s with a removal efficiency of more than 99.08 %. During the melting process, the evaporation rate of silicon is 1.10 × 10^?5 kg/s. The loss of silicon could be reduced up to 1.7 % during oxygen removal process to a desirable figure, indicating EBM is an effective method to remove oxygen from silicon and decrease the loss of silicon.     

A bird nest-like manganese dioxide and its application as electrode in supercapacitors

A novel bird nest-like nanostructured MnO2(BNNS-MnO2) was prepared by a facile and cost-effective strategy. Their structures and morphologies were characterized by field emission scanning electron microscopy, transmission electron microscopy and powder X-ray diffraction. Capacitive behaviors were investigated by cyclic voltammetry and galvanostatic charge-discharge. The obtained nano-MnO2 possesses a well designed loose-assembled hierarchical nanoarchitecture with an appropriate crystallinity which gives rise to excellent performances as an electrode material for supercapacitors. A maximum specific capacitance of 917 F/g has been obtained at a current density of 5 mA/cm2 in 6 mol/L KOH aqueous solution, and a specific capacitance of 210 F/g has been maintained for 500 cycles. As the low cost of MnSO4 and KCr2O7 and the low reaction temperature, the present method avoids the requirements for complicated operations, time/energy-consuming and expensive reagents, and perhaps is ready for the industrialization of nano-MnO2 production.     

Resolution enhancement in hydrophobic interaction chromatography via electrostatic interactions

In this work, a new type of hydrophobic stationary phase that provide electrostatic interactions with analytes was developed by bonding β-phenylethylamine as a functional ligand to silica. This stationary phase can separate proteins with similar hydrophobicity that traditional hydrophobic resins cannot. Hen egg white was separated to examine the selectivity. The results show that the introduced electrostatic interactions are an important factor for the resolution enhancement and the new resin could have important applications in separation and purification of biological macromolecules.     

Spatiotemporal dynamics of lump solution to the (1 + 1)-dimensional Benjamin–Ono equation

Nonlinear Dynamics - This paper focuses on the finite-time synchronization problem for a kind of general complex networks with intrinsic time-varying delays and hybrid couplings (i.e., containing...     

Approach for the Direct Synthesis of β-Dichlorosubstituted Acetanilides Using Iodine Trichloride (ICl3) as the Oxidant and Catalyst

A reliable method for direct synthesis of β‐dichlorosubstituted acetanilides is reported. The key transformation involves the oxidative and catalytic cleavage of a carbon‐carbon bond in the presence of iodine trichloride (ICl₃). In this protocol ICl₃ is used not only as the catalyst but also as the oxidant which widely broadens the scope of its application in organic synthetic chemistry.