Behavior and surface energies of polybenzoxazines formed by polymerization with argon,oxygen, and hydrogen plasmas

Polybenzoxazine (PBZZ) thin films can be fabricated by the plasma‐polymerization technique with, as the energy source, plasmas of argon, oxygen, or hydrogen atoms and ions. When benzoxazine (BZZ) films are polymerized through the use of high‐energy argon atoms, electronegative oxygen atoms, or excited hydrogen atoms, the PBZZ films that form possess different properties and morphologies in their surfaces. High‐energy argon atoms provide a thermodynamic factor to initiate the ring‐opening polymerization of BZZ and result in the polymer surface having a grid‐like structure. The ring‐opening polymerization of the BZZ film that is initiated by cationic species such as oxygen atoms in plasma, is propagated around nodule structures to form the PBZZ. The excited hydrogen atom plasma initiates both polymerization and decomposition reactions simultaneously in the BZZ film and results in the formation of a porous structure on the PBZZ surface. We evaluated the surface energies of the PBZZ films polymerized by the action of these three plasmas by measuring the contact angles of diiodomethane and water droplets. The surface roughness of the films range from 0.5 to 26 nm, depending on the type of carrier gas and the plasma‐polymerization time. By estimating changes in thickness, we found that the PBZZ film synthesized by the oxygen plasma‐polymerization process undergoes the slowest rate of etching in CF₄ plasma. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4063–4074, 2004     

Assessment of thermal expansion coefficient of methylsilsesquioxane thin film

For the methylsilsesquioxane film whose optical birefringence is almost zero, it was recently reported that its vertical thermal expansion coefficient (CTE) was approximately one order of magnitude larger than the lateral CTE. Though the birefringence is not an absolute predictor of anisotropic behavior, the discrepancy in both the CTEs was so remarkable that it was essential to investigate whether the anisotropy was intrinsic property or not. If the effect of Poisson's ratio is considered in the calculation of the vertical CTE and when elastic modulus measured by surface acoustic wave spectroscopy is used in the assessment of the lateral CTE, both the CTEs are coincident with each other. Therefore, it can be concluded that the discrepancy in the CTEs can be attributed to a higher in‐plane polymer chain orientation but it can also arise from the misleadingly assumed modulus and Poisson's ratio. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3109–3120, 2006     

The application of NMR and MS methods for detection of adulteration of wine,fruit juices,and olive oil. A review

This review covers two important techniques, high resolution nuclear magnetic resonance (NMR) spectroscopy and mass spectrometry (MS), used to characterize food products and detect possible adulteration of wine, fruit juices, and olive oil, all important products of the Mediterranean Basin. Emphasis is placed on the complementary use of SNIF-NMR (site-specific natural isotopic fractionation nuclear magnetic resonance) and IRMS (isotope-ratio mass spectrometry) in association with chemometric methods for detecting the adulteration.     

Polarographische Bestimmung des Pyridoxols in pharmazeutischen Präparaten

Zusammenfassung Es wird eine neue polarographische Methode zur direkten Bestimmung des Pyridoxols in Injektionspräparaten und Tabletten beschrieben. Die ausgearbeitete Methode beruht auf der polarographischen Reduktion des Pyridoxolmoleküls im Milieu von Ammoniak-Ammoniumchlorid-Puffern und weiter auf der Bildung einer katalytischen Stufe des Pyridoxols in Veronalpuffern. Die polarographische Methode ist rascher und in manchen Fällen genauer und empfindlicher als die bisher in Gebrauch stehenden Methoden. Die Anwesenheit der in den Präparaten laufend vorkommenden Begleitstoffe des Pyridoxols stört nicht die polarographische Bestimmung. Die Methode kann auch zur Bestimmung des 3-Hydroxy-4-methoxymethyl-5-oxymethyl-2-methylpyridins benutzt werden, das ein Zwischenprodukt bei der Pyridoxolerzeugung ist.

---

Summary A new polarographic method is described for the direct determination of pyridoxol in injection preparations and tablets. This method is based on the polarographic reduction of the pyridoxol in ammonia-ammonium chloride buffer medium and also on the formation of a catalytic stage of the pyridoxol in veronal buffers. The polarographic method is faster and in many cases more accurate and more sensitive than the methods now in use. The presence of the materials which always accompany the pyridoxol in the preparations does not interfere with the polarographic determination. The method can likewise be used for determining 3-hydroxy-4-methoxymethyl-5-oxymethyl-2-methylpyridine, which is an intermediate product in the manufacture of pyridoxol.

---

Résumé On décrit une nouvelle méthode polarographique pour le dosage direct du pyridoxol dans les préparations pour injections et dans les comprimés. La méthode élaborée repose sur la réduction polarographique de la molécule de pyridoxol dans le milieu tampon ammoniaque-chlorure d'ammonium, et, en outre, sur la formation d'une phase catalytique du pyridoxol dans les tampons au véronal. La méthode polarographique est plus rapide et dans de nombreux cas plus exacte et plus sensible que les méthodes utilisées jusqu'ici. La présence d'impuretés existant couramment dans les préparations à côté du pyridoxol ne gêne pas le dosage polarographique. On peut aussi utiliser la méthode pour le dosage de l'hydroxy-3 méthoxyméthyl-4 oxyméthyl-5 méthyl-2 pyridine, substance intermédiaire dans la préparation du pyridoxol.

---

---

Herrn Dr.P. Zuman danken wit für Ratsehläge bei der Abfassung dieser Arbeit.     

Long-range interaction in the D and D′ states of H2

The interaction energy between two hydrogen atoms in the D and D′ ¹Π_u states of the hydrogen molecule has been calculated for large internuclear distances (12 ? R ? 25 bohr). The variational method and a very flexible trial wave-function were used. The results indicate that for the states under consideration the Rayleigh-Schrödinger perturbation theory with the multipole expansion of the interaction hamiltonian gives reliable results only for R > 25 bohr i.e. in the region where the interaction energies are practically negligible.     

Methane production from synthesis gas using a mixed culture ofR. rubrum M. barkeri,and M. formicicum

The components of synthesis gas, CO, H₂, and CO₂, may be converted into CH₄ biologically through either acetate or H₂/CO₂ as intermediates. Of these two routes, conversion through H₂/CO₂ is preferred. This paper presents results of mixed-culture studies employing the photosynthetic bacteriumR. rubrum for converting CO to CO₂ and H₂ by the water gas shift reaction and two methanogens,M. formicicum andM. barkeri, for converting CO₂ and H₂ into CH₄. Results are presented for triculture operation in two types of reactors, the packed bubble column and the trickle-bed reactor.     

Reversed-phase liquid chromatographic retention and membrane activity relationships of local anesthetics

The chromatographic retention and membrane activity relationships of local anesthetics were studied to address the possible mechanisms for structure specificity and inflammation-associated decrease of their effects. Five representative drugs (3 mM for each) were reacted with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine liposomes in 25 mM potassium phosphate buffer (pH 5.9-7.9, containing 100 mM NaCl and 0.1 mM EDTA) for 10 min at 37 degrees C and the membrane fluidity changes were analyzed by measuring fluorescence polarization with 1,6-diphenyl-1,3,5-hexatriene. Their capacity factors were determined on octadecyl-, octyl- and phenyl-bonded silica columns with a mobile phase consisting of 25 mM potassium phosphate buffer (pH 5.9-7.9, containing 100 mM NaCl and 0.1 mM EDTA)-methanol (30:70, v/v) at a flow rate of 1.0 ml/min and at a column temperature of 37 degrees C and diode-array detection. Mepivacaine, prilocaine, lidocaine, ropivacaine and bupivacaine fluidized membranes in increasing order of intensity, which agreed with their clinical potency. The relative degree of membrane fluidization correlated with that of retention on an octadecyl stationary phase more significantly than the other phases. Both membrane-fluidizing effects and capacity factors decreased by lowering the reaction and mobile phase pH, being consistent with the hypothesis that anesthetic potency is reduced in inflammation because of tissue acidity. Reversed-phase liquid chromatography appears to be useful for estimating the structure-specific and pH-dependent membrane-fluidizing effects of local anesthetics.     

Paçäeëeèèe èçotoèob kèeëopoäa pekthÔèkaèèeіі Moëekóëÿphoão kèeëopoäa

Es wurde eine Laboreinrichtung zur kontiniuerlichen Aktivierungsanalyse strömender, Flüssigkeiten entworfen und gebaut. Die Einrichtung bestecht aus dem Vorratsbehälter für die Probelösung, der Aktivierungskammer, einer Pu-Be-Neutronenquelle, der Meβkammer, der Meβeinrichtung, einer Laborpumpe und einem Strömungsmesser. Die vorläufigen Versuche bewiesen, daβ mit der gebauten Einrichtung die Bestimmung von Vanadium, Silber and Kobalt möglich ist.     

Surface status and size influences of nickel nanoparticles on sulfur compound adsorption

Metallic nickel nanoparticles were incorporated on mesoporous silica to remove sulfur compounds in diesel selectively. In the first method, nickel nanoparticles were formed on mesoporous silica SBA-15 by impregnation and subsequent reduction of nickel nitrate. The sulfur adsorption capacity was strongly dependent on the nickel loading and the average nickel particle size. In the second method, nickel nanoparticles were synthesized in solution in the presence of a capping agent and then incorporated in mesoporous silica MCF by sonication. Although these particles maintain their sizes on the MCF surface after heat treatment, capping agent remaining on the Ni particle surface might interfere the adsorption of sulfur compounds.