[1-芳基甲羰基-2-(1,2,4-三唑-1-基)]乙基-N,N-二烷基二硫代氨基甲酸酯衍生物的合成、结构表征及生物活性研究

以芳香基三唑类杀菌剂三唑酮为先导物设计并合成了5个含N,N-二烷基二硫代氨基甲酸酯的芳香三唑类化合物, 通过元素分析、红外光谱、核磁共振氢谱和质谱对其结构进行了表征. 用X射线单晶衍射测定了[α-(4-甲氧基苯甲酰基)-2-(1,2,4-三唑-1-基)]乙基-N,N-二甲基二硫代氨基甲酸酯的晶体结构, 晶体属于三斜晶系, 空间群, 晶胞参数为: a＝0.73482(15) nm, b＝1.1051(2) nm, c＝1.1209(2) nm, α＝90.32(3)°, β＝101.97(3)°, γ＝105.13(3)°, V＝0.8578(3) nm³, Z＝2, D_c＝1.357 g/cm³, F(000)＝368, µ＝0.324 mm^－1. 生物测试结果显示这5种有机化合物都具有杀菌性和植物生长调节活性     

硫氰酸铵-罗丹明 B-H2O的液-固体系浮选分离铜(Ⅱ)的研究

研究了硫酸铵存在下硫氰酸铵-罗丹明B-H2O的液-固体系浮选分离铜(Ⅱ)的行为及其与常见离子分离的条件.结果表明,当(NH4)2SO4用量为1.0 g,0.1 mol·L-1硫氰酸铵溶液1.5 mL和0.001 mol·L-1罗丹明B溶液2.0 mL时,铜(Ⅱ)以不溶于水的三元离子缔合物(RhB)2[Cu(SCN)4]形式在液-固两相界面定量浮选析出,而Cdd2、Mn2+、Co2+、Ni2+、Al3+等离子在此条件下不被浮选,实现了铜(Ⅱ)与这些离子的定量分离,对合成水样中微量铜(Ⅱ)进行的定量浮选分离测定,浮选富集的平均回收率达101.4%.     

Pt3Co核-Pt壳型纳米粒子的制备及磁性

Pt₃Co alloy nanoparticles were prepared by the reduction of H₂PtCl₆ and Co(OOCCH₃)₂ using NaBH₄ as a reducing agent. The Pt₃Co core-Pt shell nanoparticles (Pt₃Co@Pt) were synthesized using hydrogen absorption reduction and characterized by plasma-atomic emission spectrometry (ICP), transmission electron microscopy (TEM), X-ray diffraction (XRD) and SQUID magnetometer. The results show that average size of Pt₃Co@Pt nanoparticles is 3.6 nm with a standard deviation of 0.9 nm. Heating Pt₃Co nanoparticles in air at 700 ℃ for 1 h, Co in Pt₃Co nanoparticles was oxidized to Co₃O₄ and CoO; while no oxidation tendency was detected for Pt₃Co@Pt nanoparticles. The crystallize structure of Pt₃Co@Pt changed from the face centered cube (fcc) to the face centered tetragonal (fct) after the heating treatment. The coercivity of the heated Pt₃Co@Pt reached to 276 Oe at room temperature.     

KIT-1介孔分子筛的化学修饰及吸附性能

介孔分子筛MCM-41具有较大、可调的孔径和较高的比表面积，其骨架组成具有较强的可调变性．为该材料的应用提供了很大的空间。但全硅MCM-41分子筛在潮湿空气中，即使在室温条件下也会发生水解反应，使其介孔结构遭到破坏。前人已针对MCM-41分子筛稳定性不足的问题相继合成了稳定性较高的介孔分子筛KIT-1,     

Study on the reaction of triple helix poly(A:2I) with Cu~(2+)

The effect of Cu2+ on the triple-stranded helical structure of poly(A:2I) was studied by means of circular dichroism spectral method with the help of ultraviolet spectral and ethidium bromide fluorescence probe methods. It was found that Cu2+ destabilizes the structure of the triple helix poly(A:2I) and induces its structural transformations, meanwhile, the transformations can be partially reversed by a higher NaCl concentration. The structural transformations may be expressed by the following scheme: poly(A:2I) - poly(A:I) + poly(I)- poly(A) + 2poly(I)     

聚苯胺纳米点阵列的制备和库仑台阶现象

本文制备了PANI纳米点阵列, 利用导电原子力显微镜(C-AFM)表征了其形貌和导电性能, 在室温下观察到PANI纳米点的库仑台阶(Coulomb staircase)现象, 并利用库仑阻塞效应的理论进行了初步的分析.     

金负载量对低温水煤气变换Au/α-Fe2O3催化剂结构和性能的影响

采用共沉淀法制备了低温水煤气变换Au/α-Fe2O3催化剂。通过正交实验优化催化剂的还原活化条件，考察了金负载量对催化剂性能的影响。采用BET、XRD、UV-VIS、XRF、H2-TPR和O2-TPO等表征手段对催化剂的结构进行分析，并与其催化性能进行关联。结果表明，（1）采用10%-H2/N2还原气将催化剂在150 ℃原位还原9 h，其催化活性最高；（2）金的最佳负载量为8.00%，此时在催化剂制备过程中金的流失量较少，金粒子较小，也有利于抑制催化剂在反应过程中烧结；（3）TPR-TPO结果表明，金的负载量为8.00%时，Au/α-Fe2O3催化剂具有较易被还原、不易被氧化的性质，从而显示出最高催化活性。（4）Au/α-Fe2O3催化剂中的金以单质金（Au0）形式存在；其高活性与Au0-Fe3O4间的协同作用有关。     

茂铁基稀土铈配合物的合成与结构

本文利用单羧基二茂铁Fc-COOH和1，1′-二羧基二茂铁HOOC-Fc-COOH作为配体分别合成了双核铈配合物Ce₂(FcCOO)₆ (1)和二维层状配位聚合物Ce₂(OOC-Fc-COO)₃(2)，测定了两种配合物的晶体结构。配合物1中的金属铈离子为九配位结构，分别与周围的羧基二茂铁上的氧原子和作为辅助配体的水分子配位，茂铁间的π-π相互作用将配合物1的二聚体单元连结在一起形成二维的网状结构。配合物2中的金属铈离子亦为九配位结构，分别与周围的羧基二茂铁上的氧原子，作为辅助配体的水分子和甲醇配位形成类似于配合物1的二聚体单元，1，1′-二羧基二茂铁HOOC-Fc-COOH作为桥基配体将二聚体单元连结在一起，形成二维网状的配位聚合物。     

BaCe0.8Ho0.2O3-a陶瓷的性质与应用

Ceramic BaCe0.8Ho0.2O3-α with orthorhombic perovskite structure was prepared by conventional solid state reaction, and its conductivity and ionic transport number were measured by ac impedance spectroscopy and gas concentration cell methods in the temperature range of 600-1000 ℃ in wet hydrogen and wet air, respectively. Using the ceramics as solid electrolyte and porous platinum as electrodes, the hydrogen-air fuel cell was constructed, and the cell performance at temperature from 600-1000 ℃ was examined. The results indicate that the specimen was a pure protonic conductor with the protonic transport number of 1 at temperature from 600-900 ℃ in wet hydrogen, a mixed conductor of proton and electron with the protonic transport number of 0.99 at 1000 ℃. The electronic conduction could be neglected in this case, thus the total conductivity in wet hydrogen was approximately regarded as protonic conductivity. In wet air, the specimen was a mixed conductor of proton, oxide ion and electron hole. The protonic transport numbers were 0.01-0.09, and the oxide-ionic transport numbers were 0.27-0.32. The oxide ionic conductivity was increased with the increase of temperature, but the protonic conductivity displayed a maximum at 900 ℃, due to the combined increase in mobility and depletion of the carriers. The fuel cell could work stably. At 1000 ℃, the maximum short-circuit current density and power output density were 346 mA/cm^2 and 80 mW/cm^2, respectively.     

冻干保护剂溶液低温退火特性的研究

利用差示扫描量热仪(DSC)研究了10%叔丁醇/10%蔗糖/水溶液的冻结特性, 退火温度及退火时间, 分析了溶液的退火行为. 实验结果表明, 溶液降温时, 蔗糖的存在阻碍了叔丁醇析出, 最大冻结浓缩溶液玻璃化转变温度Tg′由－32.5 ℃降低到－42.0 ℃, 升温时在－30 ℃叔丁醇发生反玻璃化. 在反玻璃化峰附近的温度进行退火可使叔丁醇充分析出, Tg′由－42.0 ℃上升到－34.9 ℃. 所需的退火时间与退火温度有关, 退火温度越接近Tg′, 所需的退火时间越长. 在－37 ℃时, 退火20 min可完全消除反玻璃化.