Topography and field effects in the inner side of microvia hole using ToF‐SIMS

We have developed a simple and powerful method, which is called ‘angled sample holder method’, to characterize a topographic structured sample such as microsized via hole of ball grid array using time‐of‐flight SIMS. The diameter of via holes was 100 µm and the depth was 70 µm. To remove the shaded area by incidence primary ion beam and to extract secondary ions from the bottom of a via hole, several types of angled sample holders with compensation steering plate were applied on the basis of simulation results using SIMION code. And the analyses using angled sample holder method enabled us to characterize the bottom and side wall of a via hole in clear. Copyright © 2014 John Wiley & Sons, Ltd.     

A multiplex single nucleotide polymorphism genotyping method using ligase‐based mismatch discrimination and CE‐SSCP

Accuracy, simplicity, and cost‐effectiveness are the most important criteria for a genotyping method for SNPs compatible with clinical use. One method developed for SNP genotyping, ligase‐based discrimination, is considered the simplest for clinical diagnosis. However, multiplex assays using this method are limited by the detection method. Although CE has been introduced as an alternative to error prone microarray‐based detection, the design process and multiplex assay procedure are complicated because of the DNA size‐dependent separation principle. In this study, we developed a simple and accurate multiplex genotyping method using reaction condition‐optimized ligation and high‐resolution CE‐based SSCP. With this high‐resolution CE‐SSCP system, we are able to use similar‐sized probes, thereby eliminating the complex probe design step and simplifying the optimization process. We found that this method could accurately discriminate single‐base mismatches in SNPs of the tp53 gene, used as targets for multiplex detection.     

A simple fabrication method for tapered capillary tip and its applications in high‐speed CE and ESI‐MS

Fabrication of capillaries with tapered tips is an important technique that is required in many analytical chemistry areas, such as ESI‐MS, CE, electrochemical analysis, and microinjection. This paper describes a simple and effective grinding‐based fabrication method for capillaries with tapered tips. A novel grinding mode utilizing the combination of rotation and precession of an elastic capillary was developed, which significantly improved the controllability to the grinding process as well as the capillary tip shape. The capillary was fabricated by fixing it in an electric drill installed perpendicularly, and grind the capillary tip rotated around its own axis as well as the drill axis on sandpapers. Compared with conventional fabrication techniques for capillary tips, the present method is easy to control the capillary tip shape in routine laboratories without the requirement of expensive equipments or poisonous reagent (e.g. hydrofluoric acid (HF) solution). Various capillaries with different tip diameters and tip taper angles could be fabricated using the present method with good controllability and reproducibility. These capillaries were applied in high‐speed CE and ESI‐MS analysis to demonstrate the feasibility and potential of this fabrication method.     

A pair of unprecedented cyclohexylethanoid enantiomers containing unusual trioxabicyclo[4.2.1]nonane ring from Clerodendrum bungei

A pair of unprecedented enantiomers (1a/1b) of cyclohexylethanoid bearing an unusual trioxabicyclo[4.2.1]nonane ring, along with two known structurally related cyclohexylethanoids, (+)-rengyolone (2) and cleroindicin E (3), were isolated from the aerial parts of Clerodendrum bungei. The structures and absolute configurations of the enantiomers were determined by comprehensive spectroscopic analysis, single-crystal X-ray diffraction, and quantum mechanical calculation of the electronic circular dichroic (ECD) spectra. The postulated biogenetic pathway of 1a/1b was also discussed.     

A practical and efficient synthesis of 6-carboalkoxy-13-cycloalkyl-5H-indolo[2,1-a][2]benzazepine-10-carboxylic acid derivatives

A convenient and practical synthesis of 6-carboalkoxy-13-cycloalkyl-5H-indolo[2,1-a][2]benzazepine-10-carboxylic acid derivatives (6) has been developed. The key step in the synthesis utilizes an intramolecular tandem reaction sequence of a Michael addition followed by a Horner–Wadsworth–Emmons (HWE) olefination reaction between hemi-aminal 11 and methyl 2-(dimethoxyphosphoryl)acrylate 12. The ring construction occurred efficiently and purification of the products 6 was straightforward. The C-10 methyl ester of 6a was hydrolyzed selectively to the carboxylic acid 13 while the olefin of 6d was converted to the cyclopropane 14 using trimethylsulfoxonium iodide in DMSO in the presence of NaH.     

Adsorptive removal of La(III) from aqueous solutions with 8-hydroxyquinoline immobilized GMZ bentonite

Due to the low permeability, high swelling capacity and good retardation properties, bentonite has been considered as the main component of buffer/backfill material for high level radioactive wastes repository all over the world. The adsorptions of metal ion were widely investigated recently. In this presentation, we provide an easy-to-use method to immobilize 8-hydroxyquinoline onto the surface of bentonite for the use of adsorption studies of La(III) from the aqueous solution. The effects of various parameters such as contact time, pH of the solution, ionic strength and metal ion concentration on the adsorption were investigated by the batch experiments. The biggest adsorption capacity is 41.7 mg/g, higher than the value reported by our previous work which is performed by the raw bentonite. Langmuir isotherm fits the experimental data well and the adsorption follows pseudo-second-order kinetic model. In summary, 8-hydroxyquinoline immobilized GMZ bentonite is an effective adsorbent for the removal of La(III) from aqueous solutions.     

膨胀石墨负载钯纳米颗粒催化六价铬还原反应

采用高分子辅助的浸渍还原法,制备得到膨胀石墨(EG)负载的纳米钯催化剂(Pd-EG),采用X射线衍射(XRD)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)等手段对催化剂组成、结构、形貌和价态进行了表征,并考察了Pd-EG催化剂在六价铬还原反应中的活性.结果表明,催化剂中纳米钯颗粒均匀分散在膨胀石墨上,平均粒径为4.37 nm,金属负载量质量分数为0.446%.该催化剂对六价铬还原反应具有良好的催化性能,可将六价铬完全转化为三价铬,在pH=4.0及45℃条件下反应转化频率(TOF)达到3186 h-1;催化剂经过多次重复使用后的活性仍保持稳定.     

基于纳米氧化铜修饰的异戊巴比妥的新型电化学传感器的制备与应用

在纳米氧化铜修饰的玻碳电极表面电聚合一种能够快速检测尿液中异戊巴比妥(AMB)的分子印迹敏感膜,研究了该敏感膜的最佳成膜条件及最佳工作条件.通过扫描电子显微镜(SEM)、循环伏安(CV)和电化学交流阻抗法(EIS)研究了印迹膜的表面形貌及性能.电化学实验结果表明,纳米氧化铜能提高传感器对AMB的灵敏度.在最佳实验条件下,铁氰化钾分子探针的差分脉冲伏安(DPV)峰电流响应值与AMB的浓度在1.0×10-7~1.4×10-4mol/L范围内呈现良好的线性关系(线性相关系数R=0.9966);检出限为2.1×10-9mol/L(S/N=3).此印迹传感器可用于尿液中AMB的检测,加标回收率为94.00%~104.67%.     

CuInS2纳米纸阵列薄膜的制备及生长机理

采用溶剂热合成技术,以氯化铜、硝酸铟和硫脲为反应物,十六烷基三甲基溴化铵(CTAB)为阳离子表面活性剂,草酸为还原剂,无水乙醇为溶剂,直接在掺氟的SnO2透明导电玻璃(FTO)衬底上合成CuInS2(CIS)薄膜.采用扫描电子显微镜(SEM)、高分辨率透射电子显微镜(HRTEM)、X射线衍射(XRD)、拉曼光谱、能量色散谱(EDS)、紫外-可见(UV-Vis)反射光谱和透射光谱对样品的形貌、结构、成分和光学性能进行分析.结果表明,在适当的反应物浓度下,在FTO衬底上形成了垂直衬底生长的、具有良好结晶性能的黄铜矿结构的CIS纳米纸阵列薄膜.CIS薄膜中Cu,In,S的原子比为1.1∶1∶2.09,在紫外-可见和近红外波段具有良好的光吸收特性,禁带宽度约1.51 eV.结合不同反应时间制备的CIS薄膜的形貌、结构和成分分析,讨论了CIS纳米纸阵列薄膜的生长机理.     

铁酸镍用于热化学循环反应CO2分解制CO的研究

采用共沉淀法制备了NiFe₂O₄和NiFe₂O₄/ZrO₂催化剂,用TGA考察了其热化学法,CO₂高温分解反应性能。通过对反应前后催化剂的表征发现,反应高温使两种催化剂都发生了明显的烧结,导致在热还原反应中形成的还原态氧化物不能完全被CO₂氧化从而降低了催化剂的反应性能;ZrO₂的加入对于提高催化剂的热稳定性以及循环反应稳定性具有重要的作用。在高温反应炉中考察了NiFe₂O₄/ZrO₂的CO₂分解实验,结果表明,提高热还原温度可以提高CO产量,然而,随着循环次数的增加CO的产量降低得更明显。