锂离子电池正极材料licoo2的包覆改性

licoo2;表面包覆处理;锂离子电池;正极材料     

柱前衍生-高效液相色谱法测定钢及合金中钨和钼

以tiron作为柱前衍生试剂,用含3mmol·L-1pH 3.8的HOAc-NaOAc,40mmol·L-1TBA-Br和2mmol·L-1tiron的甲醇-水溶液(53+47)作流动相,在C18柱上,于15min内实现了WO42-、MoO42-的分离测定。钨和钼的检出限分别为5.98和3.20ng·ml-1。方法快速,选择性好,用于钢及合金中高含量钨和钼的测定,结果与标准值相符。     

耐超高温SiC(Al)纤维先驱体——聚铝碳硅烷纤维的研究

以聚硅碳硅烷(PSCS)与乙酰丙酮铝(Al(AcAc)3)为原料,在常压高温条件下反应制备出聚铝碳硅烷(PACS),经过熔融纺丝制备了PACS纤维.应用GPC、IR、XPS、29Si-NMR、27Al-NMR、TG、SEM、元素分析和增重等一系列分析,分别对PACS纤维的微观组成、结构以及性能进行了分析.研究结果表明,以原料质量配比为6∶100(Al(AcAc)3∶PSCS)合成的PACS化学式为SiC2.0H7.5O0.13Al0.018,数均分子量为1700左右,最适宜制备PACS纤维;PACS纤维中主要存在SiC4、SiC3H等结构,同时存在Si—O—Al键;在氮气气氛中,PACS纤维的陶瓷产率达到52%左右;预氧化处理,PACS纤维中Si—H键与空气中的氧反应形成Si—O—Si交联结构,较聚碳硅烷(PCS)纤维易于氧化,经过预氧化的PACS纤维陶瓷产率达到80%左右,是制备耐超高温SiC(Al)陶瓷纤维的合适纤维;用预氧化PACS纤维制备的SiC(OAl)纤维和SiC(Al)纤维抗拉强度高,耐高温性能好.     

牛血清白蛋白与两种金属配合物的作用研究

The interaction of Methylthymol Blue(MTB)-Zinc(Ⅱ) compound and Alizarin Red S(ARS)-Aluminum(Ⅲ) compound with Bovine serum albumin (BSA) was investigated by UV-Vis spectrophotometric method in acidic buffer solution. MTB-Zn(Ⅱ)-BSA was a blue color compound, which possesses maximum absorption at 613 nm with 172 nm, 174 nm and 18 nm of red shift compared to the MTB, MTB-BSA and MTB-Zn(Ⅱ) complexes respectively. Dual wavelength substantial amount ratio method, balance dialysis substantial amount ratio method and unity wavelength substantial amount ratio method were compared. The following results were obtained: the apparent molar absorptivity of MTB-Zn(Ⅱ) with BSA was ε=2.20×10⁴ L·mol^-1·cm^-1. Conditional proportion were defined, n_MTB∶n_Zn(Ⅱ)∶n_BSA=2∶2∶1; condition combination constant, K=2.07×1010. Combination proportion were defined, n_ARS∶n_Al(Ⅲ)∶n_BSA=6∶4∶1. Condition equilibrium constant of reaction of ARS-Al(Ⅲ) with BSA was K=8.80×10⁸. The apparent molar absorptivity of ε=2.65×10⁴ L·mol^-1·cm^-1. It is suggested that combination between BSA and MTB-Zn(Ⅲ) is due to coordination force. That combination between BSA and ARS-Al(Ⅲ) is due to the coordination bond and electrostatic force.     

锂在共轭双键高分子中的电化学嵌入反应III. 锂嵌入聚噻吩的量子化学计算†

采用Gaussian软件和HF方法, 通过从头计算(ab initio)法选取4-31G基组计算锂离子嵌入聚噻吩过程中结构与结合能的变化关系. 发现噻吩聚合时主要生成三或四聚合物. 聚合物在Li原子(或Li^＋离子)嵌入后, 聚噻吩间距离明显变小, 同时发生电荷转移, 形成稳定嵌合物; 并使噻吩环的C-α—C-β键级变小. 同时, 研究了锂离子(或原子)嵌入后体系的HOMO, LUMO能级. 聚噻吩在嵌入锂离子时LUMO轨道能级变为负值, 成为电池反应得电子的正极. 而金属Li₂ 释放Li^＋后的Li^－的HOMO能级为＋0.7427 eV, 则成为给电子的负极. 由此, 可以完成由锂/聚噻吩在高氯酸锂电解质中组成的放电过程, 并提出嵌合键级概念用来表征锂在聚噻吩间的结合程度.     

具有叶绿素-a碳架的苯乙烯基取代Z/E-二氢卟吩衍生物的合成

The Wittig reaction of methyl pyropheophorbide-d 2,obtained from methyl pyropheophorbide-a 1,with ben-zyltriphenylphosphonium bromide was performed to yield isomers 3a and 3b.The Vilsmeier reaction of nickelcomplex 4 or 7 with 3-dimethylaminoacrolein in the presence of phosphoryl chloride was carried out to form20-meso-2'-formylvinylpyropheophorbide-a 5 or 8,which was reacted with Wittig reagent to afford nickel complexisomers 6a and 6b or 9a and 9b,10a and 10b.     

8,10-二炔廿五碳酸LB膜的周期结构

合成了8,10-二炔廿五碳酸,在玻璃片、石英片和镀金片上沉积了它的LB膜,X-射线衍射研究了LB膜的周期结构和聚合对它的影响。在2θ=1°—15°范围内观察到了多达7个布拉格衍射峰。由此计算了等同周期和分子在基片上的倾斜角。用分子模型计算了衍射峰强度,得到了与实验结果相符合的衍射峰强度奇偶起伏现象。     

乙烯在纳米催化剂InVO4-TiO2上的可见光降解

The InVO₄-TiO₂ nano-crystalline photocatalyst was prepared by sol-gel method and characterized by DRS, FTIR, Raman and XRD. The photocatalytic activities of the prepared sample were investigated by photocatalytic degradation of ethylene in the gaseous phase under visible light irradiation (λ>450 nm). The results indicate that both of pure TiO₂ and InVO₄ or their simple mixture show no photocatalytic activities for degradation of ethylene under visible light irradiation. However, as-synthesized InVO₄-TiO₂ catalyzes the degradation of ethylene into CO₂ under visible light irradiation. In addition, the interaction between InVO₄ and TiO₂ results in some structural distortion to all the crystal forms of TiO₂ in as-synthesized catalyst InVO₄-TiO₂.     

高速逆流色谱与质谱联用在中药分析中的应用

高速逆流色谱 ( High- speed countercurrent chromatography,HSCCC)是新型的液 -液分配色谱技术 ,它利用多层螺旋管同步行星式离心运动 ,在短时间内实现样品在互不相溶的两相溶剂系统中的高效分配 ,从而实现样品分离[1] . HSCCC分离纯化后 ,若用 MS离线检测 ,此时须挥发原 HSCCC的溶剂体系 ,才能实现样品转移 ,还可能会带来样品污染 .HSCCC与 MS的联用克服了这些缺陷 ,具有很强的实用价值 .丹参酮 A( Tashinone A)是一种结晶性菲醌类化合物 [2 ] ,在丹参乙醚提取物中含量丰富 .本文采用正己烷 -乙醚 -乙醇 -水体系 ,将 HSCC…     

镍基气凝胶催化CH4-CO2重整制取合成气反应的研究 Ⅲ.影响催化剂积碳性能因素的探讨

考察了823K焙烧的干凝胶xNCA550、气凝胶aNCA550及浸渍型催化剂iNCA550在923K、1073K、1173K反应温度下的积碳行为，对催化剂表面碳的活性及类型进行了分析，并探讨了影响催化剂积碳的因素。实验结果表明，随反应温度的提高，催化剂的积碳能力减弱，尤以气凝胶催化剂aNCA550明显。催化剂的积碳主要发生在反应的初期，反应温度越高，到达积碳量相对稳定期所需要的时间越短；随着反应时间的延续，催化剂积碳量缓慢增长，并且表面碳的活性降低。催化剂的酸性和镍晶粒大小是影响其积碳性能的主要内在因素，而它们对积碳的影响程度受反应温度的影响，反应温度越高，催化剂表达酸性中心利于积碳的作用越小，小晶粒镍抑制催化剂积碳的能力越强。