长链烷基苯异构体的气相色谱研究

长链烷基苯异构体的分离分析是石油化学中一个重要课题,曾有较多作者用气相色谱方法研究了长链烷基苯的分离及不同碳数的     

环氧交联网Tg转变的tanδ-T曲线解析

 本文系统地研完了预聚物分子量、固化剂配比和固化条件对环氧交联网T_g松弛内耗峰松弛时间分布的影响。本实验和理论研究结果首次证明了环氧交联网T_g松弛过程具有单一松弛时间描述的线性标准固体的特征,与预聚体分子量、固化剂配比和固化条件无关。此结果可用环氧交联网的两相结构特征加以解释。     

Structural Features of a Polysaccharide from Centella asiatica

Centella asiatica has been used as remedy for sodation, stabilization and against lepra, anabrosis1 in the oriental countries. The low-molecular-weight constituents in Centella asiatica have been investigated1. However, no polysaccharides have been reported. 1BI was the first polysaccharide isolated from C. asiatica, which had immunostimulating activity in vitro. In present study, we report the structural features of 1BI. Experimental Extraction, isolation and purification Dried C.…     

示差脉冲伏安法测定乳酸脱氢酶活性及纳米微粒生物毒性检测新方法研究

采用示差脉冲伏安法，在乳酸脱氢酶(LDH)酶促体系“丙酮酸盐 + NADH +H⁺ (?) 乳酸盐 + NAD⁺”中，通过检测NAD⁺还原峰电流的变化，测定了不同条件下(不同酶用量、缓冲液pH值以及温度)LDH的活性、酶促体系的米氏常数K_m^NADH以及最大反应速率v_max。并且在最佳实验条件下，通过检测LDH活性的改变，实验考察了3种纳米物质(ZnS，TiO₂(R)和TiO₂(A))对乳酸脱氢酶酶促体系的影响。     

室温熔盐二(三氟甲基磺酸酰)亚胺锂-尿素体系的分子动力学模拟

应用分子动力学模拟了25 ℃和50 ℃时新型室温熔盐二(三氟甲基磺酸酰)亚胺锂[LiN(SO2CF3)2, LiTFSI]与尿素(摩尔比为1:3.6)体系的结构与动力学性质. 在两个温度下体系的微观结构基本相同, Li+的配位数约为5, 且都是与溶剂和阴离子中的氧原子发生配位. 对TFSI-的研究表明, 每个TFSI-只提供四个氧中的一个与Li+配位; 而且在Li+的配位层中, TFSI-具有顺、反和gauche 等不同的构象, 并且不同构象出现的几率会随着温度的改变而改变.     

δ-（甲酰乙烯基）二氢卟吩衍生物的合成

以脱镁叶绿酸-a甲酯为原料,利用Vilsmeier反应合成δ-(甲酰乙烯基)二氢卟吩衍生物.镍(II)脱镁叶绿酸-a甲酯和镍(II)红紫素-18与Vilsmeier试剂作用,生成了E环被打开的镍(II)δ-(甲酰乙烯基)红紫素-7-三甲酯和镍(II)δ-(甲酰乙烯基)二氢卟吩P6三甲酯.镍(II)N-乙酰氧基红紫素-18-酰亚胺和Vilsmeier试剂作用,生成了镍(II)δ-(甲酰乙烯基)-N-乙酰氧基红紫素-18-酰亚胺.当这些化合物脱去镍离子后,吸收波长明显红移,δ-(甲酰乙烯基)-N-乙酰氧基红紫素-18-酰亚胺的吸收波长达到742nm.同时保留了对δ-位再进行化学修饰的可能性.合成的新化合物均由核磁共振、红外光谱、元素分析和质谱予以证实.     

气相分子吸收光谱法测定地下水中亚硝酸盐氮、氨氮、硝酸盐氮

采用气相分子吸收光谱法测定地下水中的亚硝酸盐氮(NO2^-)、氨氮(NH4^+)、硝酸盐氮(NO3^-)。考察NO2^-,NH4^+和NO3^-测定时的相互干扰,并给出了相应的消除方法。研究结果表明,测定NO2^-时,NH4^+和NO3^-无干扰;NO2^-对测定NH4^+和NO3^-产生干扰,可分别采用分段法和加入2滴10%氨基磺酸溶液的方法消除干扰;对于不含NO2^-或NO2-含量不高的地下水样品,可简化操作步骤直接测定NO3^-。该方法测定结果的相对标准偏差为0.73%~2.74%(n=12),样品加标回收率为97.67%~100.28%。所用检测仪器具有流动注射、自动进样及在线绘制标准曲线的功能,简化了标准方法中的样品前处理过程,减少了样品的损失,实现了自动化分析,大幅提高了检测结果的准确度和工作效率。     

Synthesis and Kinetic Study on the Chromium(III) Complex [Cr(ASA)(en)2]Cl·2H2O

In order to explore the transfer mechanism of chromium(III) in mammals, a novel complex [Cr(ASA)(en)₂]Cl· 2H₂O, bis(ethylenediamine‐ κ ² N,N′)(4‐aminosalicylic acid‐ κ ² O,O′) chromium(III) monochloride dihydrate was synthesized (4‐aminosalicylic acid=H₂ASA, ethylenediamine=en). The crystal structure belongs to orthorhombic system with the space group P2₁2₁2₁ by means of X‐ray diffraction. The characteristic for transfer of Cr³⁺ from the compound to the low‐molecular‐mass chelator EDTA and the iron‐binding protein apoovotransferrin (apoOTf) was followed by UV‐visible (UV‐Vis) and fluorescence spectra in 0.01 mol·L^?1 Hepes at pH 7.4. The second order rate constants were calculated. Those spectra in conjunction were used to obtain more accurate information about the interaction of chromium complex with apoOTf. The experimental results indicate that Cr³⁺ can be transferred from the complex to apoOTf with the retention of the 4‐aminosalicylic acid acting as a synergistic anion.     

Theoretical studies of mechanisms of cycloaddition reaction between difluoromethylene carbene and acetone

Mechanisms of the cycloaddition reaction between singlet difluoromethylene carbene and acetone have been investigated with the second‐order Møller–Plesset (MP2)/6‐31G* method, including geometry optimization and vibrational analysis. Energies for the involved stationary points on the potential energy surface (PES) are corrected by zero‐point energy (ZPE) and CCSD(T)/6‐31G* single‐point calculations. From the PES obtained with the CCSD(T)//MP2/6‐31G* method for the cycloaddition reaction between singlet difluoromethylene carbene and acetone, it can be predicted that path B of reactions 2 and 3 should be two competitive leading channels of the cycloaddition reaction between difluoromethylene carbene and acetone. The former consists of two steps: (i) the two reactants first form a four‐membered ring intermediate, INT2, which is a barrier‐free exothermic reaction of 97.8 kJ/mol; (ii) the intermediate INT2 isomerizes to a four‐membered product P_2b via a transition state TS2b with an energy barrier of 24.9 kJ/mol, which results from the methyl group transfer. The latter proceeds in three steps: (i) the two reactants first form an intermediate, INT1c, through a barrier‐free exothermic reaction of 199.4 kJ/mol; (ii) the intermediate INT1c further reacts with acetone to form a polycyclic intermediate, INT3, which is also a barrier‐free exothermic reaction of 27.4 kJ/mol; and (iii) INT3 isomerizes to a polycyclic product P₃ via a transition state TS3 with an energy barrier of 25.8 kJ/mol. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

具有三维交叉孔道的新型亚磷酸锌的合成与结构

本文报道了一种新型三维亚磷酸锌[HO(CH₂)₂NH₃]₂•[Zn₃(HPO₃)₄]的合成和晶体结构。在它的结构中，ZnO₄和HPO₃严格按照顶点连接的方式交替相连。骨架结构存在两个沿着不同方向无限延伸的由ZnO₄和HPO₃组成的四元环链，在[0 1 0]、[0 4 15]和[0 -4 15]三个方向形成了三个交叉8元环孔道，有机胺阳离子起着平衡电荷和稳定骨架的结构。它的晶体数据为：[HO(CH₂)₂NH₃]₂•[Zn₃(HPO₃)₄],M=640.21, 正交晶系, Fdd2空间群, a=2.8528, b=0.8426, c=1.6159nm, Z=8, V=3.884nm³, R₁=0.0219, wR₂=0.0544。