Shape-controlled synthesis of nanocrystalline titania at low temperature

The interesting shape (shuttle-like, sphere with needles, uniform particles) rutile titania were prepared by the hydrolysis of TiCl₄ in high acidic aqueous solution in the absence or presence of PEG-1000. PEG-1000 acted as dispersant, which could control the shape and size of the precipitate of titania. As a result, shuttle-like nanocrystalline appeared and the aggregation was improved with the increase of the amount of acid and the decrease of the concentration of TiCl₄ in the absence of PEG-1000. Uniform nanoparticles were obtained in the presence of PEG-1000 and the diameter of the particles decreased with increasing the amount of PEG-1000. This process simplification will lower production cost and make continuous process possible. The products were analyzed using X-ray diffractometer, transmission electron microscopy.     

Microstructure change in deuterium implanted CLAM steel induced by electron irradiation

As Reduced Activation Ferritic/Martensitic (RAFM) steel is considered the primary candidate for use as a structural material in fusion power reactors,many countries are developing different kinds of RAFM.China is developing new CLAM (China Low Activation Martensitic) steel.The study investigates microstructural changes in CLAM steel implanted with deuterium ions induced by 1250 keV electron irradiation from R.T.to 873 K,and observes both the growth and shrinkage of the defect clusters produced by deuterium ...     

Macrocycle-Derived Functional Xanthenes and Progress Towards Concurrent Detection of Glucose and Fructose

The detection of saccharides in biological media is of great current importance for the monitoring of disease states. We have previously reported that solutions of boronic acid-functionalized macrocycles form acyclic oligomeric materials in situ. The oligomers contain fluorescent xanthene moieties. Current efforts are aimed at modulating the spectroscopic responses of these materials for the analysis of specific sugars. We describe conditions whereby the xanthene boronic acids exhibit high colorimetric fructose selectivity. In contrast, at physiological levels selective glucose monitoring can be achieved via fluorescence. Additionally, we describe a method which exhibits promise for detecting both glucose and fructose at dual wavelengths in the UV-Vis region. Mechanistic rationale for each of these findings is presented.     

Growth of single-crystal magnetite nanowires from Fe3O4 nanoparticles in a surfactant-free hydrothermal process

Single-crystal magnetite nanowires with average diameter of ca. 20 nm and length of up to several micrometers were prepared by a simple alkaline surfactant-free hydrothermal process. The crystallinity, purity, morphology, and structural features of the as-prepared magnetite nanowires were investigated by powder X-ray diffraction, transmission electron microscopy (TEM) and selected area electron diffraction. The composition and length of nanowires depends on the pH, with higher pH favoring longer nanowires composed entirely of Fe₃O₄. A mechanism for nanowire growth is proposed.     

ITER 超导馈线系统的设计

ITER( 国际热核试验堆) 采用超导馈线系统传输磁体线圈所需电流、冷却液及数据信号, 并在失超等异常情况, 通过馈线转移磁体能量, 以保护整个磁体系统。介绍了国际热核试验堆超导馈线系统的结构及设计情况, 为同类型超导磁体的馈线设计提供了有益的参考。     

相对论重离子碰撞实验中混合事件方法的研究

把RQMD(Relativistic Quantum Molecular Dynamics)产生器产生的数据输入作为原始事例取样,讨论了在比较复杂的背景情况下,一种新的混合事件方法,用以证实在相对论重离子碰撞实验中高能量激发共振态的存在.并以共振态重子Δ⁺⁺为例演示了这一方法的应用.     

A realization of digital wireless transmission for MRI signals based on 802.11b

In this paper, a digital wireless transmission system based on 802.11b standard for magnetic resonance imaging (MRI) application is designed and built for the first time to eliminate the interference aroused by coil array cables. The analysis shows that the wireless receiver has a very high sensitivity to detect MRI signals. The modulation technique of differential quadrature phase shift keyed (DQPSK) can be applied to MRI data transmission with rate of 2 Mbps and bandwidth of 2 MHz. The bench test verifies that this wireless link has a dynamic range over 86 dB supporting up to 3 T MRI system data transmission. The 2D spin echo imaging of phantom is performed and the SNR of the image obtained by the wireless transmission can be comparable with that got by the coaxial cables.     

晶粒间界相对纳米Nd_2Fe_(14)B各向异性和矫顽力的影响

本文采用立方晶粒结构模型研究了晶粒间界相对纳米硬磁材料各向异性和矫顽力的影响.结果表明:晶粒间界相减弱了交换耦合作用.当晶粒尺寸D为定值时,随着晶粒间界相厚度d的增加,晶粒平均各向异性单调增加,而材料的有效各向异性Keff、矫顽力单调减小.我们计算的矫顽力随晶粒尺寸的变化与相关理论和实验结果基本一致.     

LaMgAl11O19:Co2+被动调Q铒玻璃激光器研究

综述了被动调Q铒玻璃激光器的发展概况,推导了被动调Q铒玻璃激光器输出脉冲能量、脉宽的解析表达式,数值模拟了腔内损耗与输出脉冲能量、脉宽及峰值功率的关系以及输出脉冲能量与输入抽运能量的关系.设计了一台LaMgAl11O19:Co2 被动调Q铒玻璃激光器,实验验证了数值模拟分析结果.结果表明,腔内损耗增加将导致输出脉冲能量下降,脉宽变大,从而峰值功率降低.输入能量低于12 J时,输出只有单脉冲,当输入能量大于12 J时,输出会出现双脉冲.在8 J的电输入下,获得了峰值功率50 kW,2.7 mJ的1.535 tm激光输出.最后讨论了提高单脉冲能量的方法.     

均匀核化过程中凝结核分维数研究

运用分子动力学模拟方法,对水蒸汽均匀核化凝结过程进行了研究.采用分形理论分维数统计中的小盒计数法,对二维条件下凝结核的分维数的变化规律进行了统计计算.模拟结果表明,水蒸汽均匀核化过程中所形成的凝结核表面的分维数并非一过程量,凝结核表面分维数并不随凝结核的长大而变化,当凝结核长大到一定程度后,其表面分维数将达到一恒定值.本文对初始温度为500℃,密度分别为100和200 kg/m3的过热水蒸气冷却到20℃的过程进行了模拟,水蒸汽在二维均匀核化过程中所形成的凝结核表面分维数为1.79.