The importance of glyceraldehyde radiolysis in chemical evolution

Studies in chemical evolution are intended to demonstrate how compounds of biological importance are generated from substances that could have been found in abiotic conditions on the primitive Earth or in extraterrestrial environments. In this context, the aim of the present work was to examine the behavior of dl-glyceraldehyde in both aqueous solution and solid samples under gamma irradiation. We irradiated dl-glyceraldehyde at different doses and temperatures with a gamma source; even at low doses and temperature (77 K), free radicals were detected. Among the products formed were ethylene glycol and glycolaldehyde. Some sugar-like compounds were also detected.

     

Investigation of Cold Atmospheric Plasma-Activated Water for the Dental Unit Waterline System Contamination and Safety Evaluation in Vitro

The disinfection of the inner surface of a medical device has long been a challenge for the central sterile supply departments. Dental unit waterline system (DUWLs) foster the attachment of microorganisms and development of biofilm, which lead to continuous contamination of the outlet water from dental units; this contamination may be responsible for a potential risk of infection due to the exposure of patients and medical staff. The present study investigated the disinfection effects of cold atmospheric plasma-activated water (CAPAW) on DUWLs using a model of 5-day-old Enterococcus faecalis biofilm. The results showed that the colony-forming unit was reduced from 10⁷ to 0 after 5 min of treatment. The physicochemical properties of CAPAW were evaluated, including the pH value, oxidation reduction potential, and NO radical. The results showed that the inactivation mechanisms were mainly triggered by the reactive oxygen/nitrogen species. Additionally, CAPAW had a metal corrosion rate same as that of deionized water. We conclude that CAPAW can be applied as an appropriate alternative disinfectant against biofilm contamination of DUWLs.     

A Study of the Influence of the Surrounding Gas on the Plasma Jet and Coating Quality During Plasma Spraying

Coating quality is affected by arc and plume instabilities during plasma spraying. In closed chamber plasma spraying, gradual drift is one of the intermediate instabilities, which is mainly due to the electrode erosion. This work focuses on the source of the gradual drift of the plasma jet and the influence on coating quality. The ambient state inside the chamber was controlled by a ventilation system and a vacuum system. The variation in the plasma jet was observed by a particle flux image device based on a CCD camera. The optical spectrum of the plasma plume was measured and analyzed through an optical spectrometer. The results indicated that the addition of hydrogen to plasma gas induced the change in the plasma jet length and width with changing rates depending on the chamber state and the ventilation power. With poor ventilation, the intensity of H_α emission was found to become gradually stronger while H_β and H_γ were found to become weaker. On closing the chamber and retaining enough ventilation power, it was observed that the ambient gas slowly turned red. Simultaneously, the coating weight and thickness were slightly decreased meanwhile the porosity ratio was obviously increased. The red ambient gas has been proved to be able to acidify the city water with pH value decreased from 7 to 1–3. Without hydrogen, the plasma jet was found to be stable without reddening and variation, but the plasma enthalpy was unfortunately low.     

Hydrogenation of diacetyl over composite-supported egg-shell noble metal catalysts

Two composite supports with a mixed inorganic–organic structure were synthesized: BTAl and UTAl. Hydrophilic–hydrophobic dual properties of the supports were suitable for preparing egg-shell-supported metal catalysts for selective hydrogenation reactions. The catalysts were characterized by ICP, XRD, OM, TEM, EPMA, XPS and TGA. Their mechanical resistance was assessed. Activity and selectivity were tested with the hydrogenation of 2,3-butanedione (diacetyl) to 3-hydroxy-2-butanoneacetoin (acetoin). The same order of increasing metal particle size was found for the two tested supports: Pt < Ru < Pd. The XPS analysis showed that the metal/composite catalysts reduced in H2 at 503 K had two kinds of active sites: reduced (Me°) and electron-deficient (Me⁺). It was rationalized that the hydrogen bond cleavage was performed on the Me° active sites, while reactant adsorption occurred on the Me⁺ sites. The differences in activity and selectivity between the composite catalysts were attributed to electronic effects on the different metals and to different adsorptive properties of the different polymers. The high selectivity to acetoin was attributed to the preferential adsorption of diacetyl as compared to the adsorption of acetoin. The BTAl catalysts were slightly more active and selective than the UTAl ones. This was attributed to electronic effects caused by remnant organic groups on the composite supports (urethane or biphenyl on UTAl or BTAl, respectively). Pd-BTAl was the most active and selective catalyst, a fact related to electronic effects of both palladium and the support.     

TMDIM: an improved algorithm for the structure prediction of transmembrane domains of bitopic dimers

\(\alpha\)-Helical transmembrane proteins are the most important drug targets in rational drug development. However, solving the experimental structures of these proteins remains difficult, therefore computational methods to accurately and efficiently predict the structures are in great demand. We present an improved structure prediction method TMDIM based on Park et al. (Proteins 57:577–585, 2004) for predicting bitopic transmembrane protein dimers. Three major algorithmic improvements are introduction of the packing type classification, the multiple-condition decoy filtering, and the cluster-based candidate selection. In a test of predicting nine known bitopic dimers, approximately 78% of our predictions achieved a successful fit (RMSD <2.0 Å) and 78% of the cases are better predicted than the two other methods compared. Our method provides an alternative for modeling TM bitopic dimers of unknown structures for further computational studies. TMDIM is freely available on the web at https://cbbio.cis.umac.mo/TMDIM. Website is implemented in PHP, MySQL and Apache, with all major browsers supported.     

Mechanically-induced dimensional extensibility of fibers towards tough fiber networks

The beneficial effect of materials with high aspect ratio as composite reinforcement has prompted continuous interest towards cellulosic fibers. Besides providing stiffness, fibers can potentially contribute to composite extensibility. While mechanical treatments are typically used to adjust the physical and surface properties of fibers, less is known about ensuing effects on their extensibility and that of associated networks. Fiber network dimensional extensibility of 16% was achieved by processing the precursor aqueous fiber dispersions following a simple mechanical treatment with a judicious combination of low (PFI refining) and high concentrations and temperatures (Wing defibrator). Consequently, deformation of fibers and increased inter-fiber bonding resulted in a three-fold increase in strength to rupture of the fiber network leading to the structures with unprecedented toughness.     

Analysis of moisture sorption in lyocell-polypropylene composites

The preparation of composites by thermoforming of intermingled fibre slivers is an efficient method to receive high performance and lightweight materials. Cellulosic fibres have benefits like low density and sustainability but the sorption of water due to the high hydrophilicity of the cellulose requires attention. The swelling of the wet fibres changes the fibre-matrix adhesion and as a consequence, the mechanical strength of the composite is influenced negatively. In this study, the thermoplastic polypropylene was combined with lyocell fibres as reinforcement. Moisture sorption isotherms of cellulose/polypropylene composites were recorded as function of relative humidity. Additionally, the specific surface area was analysed by the Brunauer–Emmett–Teller model. It has been found, that the moisture sorption is influenced by the polypropylene (PP) ratio in the composites. At 60% relative humidity the moisture uptake of the lyocell fibres was reduced from 10.8 to 5.8% for lyocell embedded in a composite with 50% polypropylene. Besides the hysteresis between moisture sorption/desorption cycles was found to be proportional to the increased content of PP. The “Parallel Exponential Kinetics” (PEK) model was used to analyse the kinetics of moisture sorption of these composites in more detail. With the help of the PEK model the sorption/desorption kinetics were described by a fast and slow moisture sorption/desorption process. The capacity for rapid moisture sorption is reduced by the formation of PP layers on the lyocell surface. The share of slow moisture sorption increased with increasing PP content in the composite. The results support understanding of the interaction of water with cellulose containing composites.     

A systematic study of the hydration and drying process of silica xerogels using Cu(II) EPR spectroscopy

Journal of Sol-Gel Science and Technology - The influence of the hydration and drying process on the line shape and signal intensity of the electron paramagnetic resonance spectra recorded from...     

Recent advances in anion recognition

By linkage of 1,5-naphthalenedisulfonate (1,5-NDS) anion fluorophore, 3D cucurbit[7]uril (CB[7]) framework has been constructed. The maximum solid-state fluorescence wavelength of the CB[7] framework exhibits blue-shift from 406 to 340 nm in comparison with that of 1,5-NDS, which was ascribed to increased excited energy from 0.10 to 0.13 eV according to theoretical calculations.     

Predicting the cell-wall compositions of <Emphasis Type="Italic">Pinus radiata</Emphasis> (radiata pine) wood using ATR and transmission FTIR spectroscopies

Because plant cell walls vary in their polysaccharide compositions and lignin contents, their monosaccharide compositions and lignin contents are often determined, but these analyses are time consuming and laborious. We therefore investigated Fourier transform infrared (FTIR) spectroscopy coupled with partial least squares (PLS) regression analysis as a way of rapidly predicting the monosaccharide compositions and lignin contents of the cell walls of compression wood (CW) and opposite wood (OW) of the gymnosperm Pinus radiata. The effects were investigated of sample moisture content (ambient or dry) and sample particle size (large particles, < 0.422 mm or small particles, < 0.178 mm) of milled wood on attenuated total reflectance (ATR) and transmission FTIR spectra, as well as the PLS-1 models and subsequent predictions. PLS-1 models were built using mixtures of CW and OW as the training set, to provide a linear range of monosaccharide compositions and lignin contents. Models were externally validated by predicting another set of wood mixtures before predicting CW and OW of a separate test set. Most of the monosaccharide amounts in the separate test set were best predicted by ATR spectroscopy of ambient large particles, achieving the lowest standard error values for the monosaccharides arabinose (0.36%), xylose (1.05%), galactose (1.79%), glucose (6.32%), and 4-O-methylglucuronic acid (0.20%). The results show the feasibility of using ATR spectroscopy of ambient large particles for the rapid prediction of monosaccharide compositions and lignin contents of plant cell walls.