Modelling and design of a travelling-wave electro-optic modulator on InP

Based on a rigorous vectorial analysis, a fast travelling-wave Mach–Zehnder modulator is modelled and designed. The cross-section of the semiconductor layer stack and the lossy electrodes are carefully modelled using the method of lines in order to investigate propagation characteristics, velocity and losses. This yields an accurate microwave and optical field distribution to explain the behaviour of the component. In order to enhance the modulation efficiency, design curves are derived and the cross-sectional dimensions for minimum microwave loss are determined. The loss of the optimized modulator agrees very well with small-signal measurements up to 40 GHz and HFSS simulations. The layerstack of the fabricated device is suitable for integration with InP multi-wavelength lasers.     

Rapid DNA hybridization analysis using a PDMS microfluidic sensor and a molecular beacon.

A rapid DNA analysis has been developed based on a fluorescence intensity change of a molecular beacon in a PDMS microfluidic channel. Recently, we reported a new analytical method of DNA hybridization involving a PDMS microfluidic sensor using fluorescence energy transfer (FRET). However, there are some limitations in its application to real DNA samples because the target DNA must be labelled with a suitable fluorescent dye. To resolve this problem, we have developed a new DNA microfluidic sensor using a molecular beacon. By monitoring the change in the restored fluorescence intensity along the channel length, it is possible to rapidly detect any hybridization of the molecular beacon to the target DNA. In this case, the target DNA does not need to be labelled. Our experimental results demonstrate that this microfluidic sensor using a molecular beacon is a promising diagnostic tool for rapid DNA hybridization analysis.     

Lein?l, Lein?lfirniss und Oelfarben

Ohne Zusammenfassung     

A parallel method for time discretization of parabolic equations based on Laplace transformation and quadrature

We consider the discretization in time of an inhomogeneous parabolicequation in a Banach space setting, using a representation ofthe solution as an integral along a smooth curve in the complexleft half-plane which, after transformation to a finite interval,is then evaluated to high accuracy by a quadrature rule. Thisreduces the problem to a finite set of elliptic equations withcomplex coefficients, which may be solved in parallel. The paperis a further development of earlier work by the authors, wherewe treated the homogeneous equation in a Hilbert space framework.Special attention is given here to the treatment of the forcingterm. The method is combined with finite-element discretizationin spatial variables.     

A fast method to measure the thickness of removed layer from etching of SSNTD based on EDXRF

Solid state nuclear track detectors are commonly used for measurements of concentrations of radon gas and/or radon progeny. All these measurements depend critically on the thickness of the removed layer during etching. However, the thickness of removed layer calculated using the etching period does not necessarily provide a sufficiently accurate measure of the thickness. For example, the bulk etch rate depends on the strength of stirring during etching for the LR 115 detector. We propose here to measure the thickness of the removed layer by using energy-dispersive X-ray fluorescence spectrometry. In the present work, a reference silver nitrate pellet is placed beneath the LR 115 detector, and the fluorescence X-ray intensity for silver is then measured. We have found a linear relationship between the X-ray intensity and the thickness of the removed layer for LR 115 detector. This provides a fast method to measure the thickness of removed layer from etching of LR 115 detector. However, this method was found to be inapplicable for the CR-39 detector. Therefore, alternative methods have yet to be explored for the CR-39 detector.     

The kinetics of the light-induced defect creation in hydrogenated amorphous silicon – Stretched exponential relaxation

Our model for light-induced defect creation in hydrogenated amorphous silicon is applied to its kinetics, i.e., the growing curve of light-induced dangling bond density as a function of illumination time, which is fitted to a stretched exponential function. Two parameters β and τ involved in the function are estimated as functions of saturated dangling bond density in terms of our model. These are compared with two experimental results, i.e., our results obtained from ESR measurements and Shimakawa et al.’s results obtained from photoconductivity measurements. The saturated dangling bond density is also measured as a function of the generation rate of free carriers. The experimental results are compared with calculated results and discussed.     

Buckling of a stiff thin film on a compliant substrate in large deformation

A finite-deformation theory is developed to study the mechanics of thin buckled films on compliant substrates. Perturbation analysis is performed for this highly nonlinear system to obtain the analytical solution. The results agree well with experiments and finite element analysis in wavelength and amplitude. In particular, it is found that the wavelength depends on the strain. Based on the accurate wavelength and amplitude, the membrane and peak strains in thin films, and stretchability and compressibility of the system are also obtained analytically.     

Receiver set partitioning and sequencing for multicasting traffic in a WDM lightwave single-hop network

This paper considers a receiver set partitioning and sequencing problem in a wavelength division multiplexing single-hop lightwave network for multicasting traffic. The problem is analysed in the approach of uncapacitated single batch-processing machine scheduling. In the analysis, several solution properties are characterized with respect to a mean flow time measure, based upon which two heuristic algorithms are developed, along with a dynamic programming algorithm. Several numerical experiments show that the heuristic algorithms generate good schedules. The problem is extended to consider two measures simultaneously including the mean flow time and the number of transmissions, for which the proposed algorithms also perform well.     

NMR investigations of hexamethyldisilane confined in controlled pore glasses: Pore size distribution and molecular dynamics studies

In this work, the melting-point depression and molecular dynamics of hexamethyldisilane confined within five controlled pore glasses, with mean diameters ranging from 7.9 to 23.9 nm, are studied by high-field (9.4 T) nuclear magnetic resonance (NMR), and the results are discussed with reference to the bulk substance. The melting-point depression in pores with radiusR follows the simplified Gibbs-Thompson equation ΔT=k _p/(R−s) with ak _p value of 74 K · nm and ans value of 1 nm. To our knowledge, this is the first time thek _p value of hexamethyldisilane is reported. Proton spin-lattice relaxation times (T ₁), spin-spin relaxation times (T ₂), and diffusivities (D) are reported as a function of temperature. The confinement in the pores gives rise to substantial changes in the molecular dynamics and the phase behavior. The line-shape measurements reveal a two-phase system assigned to a relatively mobile component at the pore walls and a crystalline solid at the center of the pores. However, theT ₂ measurements show that the mobile phase also embraces a minor component attributed to nonfrozen liquid in pockets or micropores. The diffusivity of the major narrow-line component is approximately three orders of magnitude larger than that in the plastic bulk phase, reflecting fast diffusion of mobile molecules. Below the melting region,T ₁ of the narrow line is significantly shorter thanT ₁ of the broad line, suggesting that the molecular reorientation is more hindered close to the surface than at the center of the pore.