Interactions between the components in isotactic polypropylene blended with EPDM

The interaction of isotactic polypropylene with ethylene propylene diene terpolymer in their blends has been investigated by use of differential scanning calorimetry, dynamic mechanical analysis, wide- and small-angle x-ray scattering, and by investigating the nucleation and kinetics of crystallization of the iPP component under the polarization microscope. It is found, that the dispersion of the EPDM component in the iPP matrix is dependent on blend composition and is maximal at 10% EPDM content. An interface layer between the two components is formed by migration of iPP molecules into the EPDM phase. A model for this interface is proposed.     

Substrates for flexible magnetic recording media: The role of base films for modern performance requirements

The trend in magnetic recording media is towards higher frequencies and larger storage capacities. Base film technology has developed in a manner analogous to corresponding demands on particulate and thin-film media, i.e. in the direction to reduced thickness, smoother surfaces, and very high uniformity. Key elements for the success of polyester films as substrates for all kinds of flexible media are new concepts for pigmentation and surface design. Future digital video recording systems and thin-film media will require new substrates with higher mechanical strength and thermal stability. Trends in base film development including dual-surface films and alternative polymer substrates are discussed.     

Operational Research and Regulation: Theory and Practice

In this Blackett Lecture, Professor Littlechild, Director General of Electricity Supply in the UK's Office of Electricity Regulation, renews acquaintance with some models he has developed over the years, introduces some models he has recently met, and discusses models that it would seem to be worthwhile developing. He concludes that for all concerned in the electricity industry, success depends on ever improving decision-making, in which OR has a vital role.     

A STRASSEN LAW OF THE ITERATED LOGARITHM FOR PROCESSES WITH INDEPENDENT INCREMENT

ＡＳＴＲＡＳＳＥＮＬＡＷＯＦＴＨＥＩＴＥＲＡＴＥＤＬＯＧＡＲＩＴＨＭＦＯＲＰＲＯＣＥＳＳＥＳＷＩＴＨＩＮＤＥＰＥＮＤＥＮＴＩＮＣＲＥＭＥＮＴＷａｎｇＪｉａｇａｎｇＡｂｓｔｒａｃｔＬｅｔＸ＝｛Ｘ（ｔ），ｔ０｝ｂｅａｐｒｏｃｅｓｗｉｔｈｉｎｄｅｐ...     

Alloying by high dose ion implantation of iron into magnesium and aluminium

Alloys of the systems Fe–Al (mixable over the whole concentration range) and Fe–Mg (insoluble with each other) were produced by implantation of Fe ions into Al and Mg, respectively. The implantation energy was 200 keV and the ion doses ranged from 1 × 10₁₄ to 9 × 10₁₇cm^-2The obtained implantation profiles were determined by Auger electron spectroscopy depth profiling. Maximum iron concentrations reached were up to 60 at.% for implantation into Al and 94 at.% for implantation into Mg. Phase analysis of the implanted layers was performed by conversion electron Mössbauer spectroscopy and X‐ray diffraction. For implantation into Mg, two different kinds of Mössbauer spectra were obtained: at low doses paramagnetic doublets indicating at least two different iron sites and at high doses a dominant ferromagnetic six‐line‐pattern with a small paramagnetic fraction. The X‐ray diffraction pattern concluded that in the latter case a dilated αiron lattice is formed. For implantation into Al, the Mössbauer spectra were doublet structures very similar to those obtained at amorphous Fe–Al alloys produced by rapid quenching methods. They also indicated at least two different main iron environments. For the highest implanted sample a ferromagnetic six‐line‐pattern with magnetic field values close to those of Fe₃Al appeared.     

State of and prospects for XeF(C−A) optically pumped lasers

Experimental and theoretical results are presented on an XeF(C?A) blue-green laser driven by 5-kJ energy. The laser was pumped by a ferrite-induced discharge of 90 cm in length. The output energy of 0.22 J was obtained with a plane-parallel resonator. A program to simulate laser operation has been developed. Numerical results for a wide range of conditions are compared with experiments performed by us and by other authors. It is found that intracavity refractive losses limit laser operation for XeF pressures above 3 torr. The laser efficiency strongly depends on the discharge-to-cavity length ratio. Possible ways to increase the laser power and efficiency are discussed.     

溶胶-凝胶制备技术与新型催化材料Ⅲ.溶胶粒子表面修饰方法制备催化膜

提出用溶胶粒子表面修饰方法，结合溶胶凝胶技术制备无机催化膜．该方法的基本原理是利用合适的金属配合物在胶粒表面的吸附作用，经溶胶凝胶过程，将活性组分结合到无机膜中．实验测定结果表明：（ＮｉＥＤＴＡ）２－，ＶＯ－３，ＭｏＯ２－４，（Ｐｄ（ＮＨ３）４）２＋，ＰｄＣｌ２－４，ＰｔＣｌ２－６和ＲｈＣｌ３－６可用来修饰ＡｌＯＯＨ溶胶．以Ｐｄ／γＡｌ２Ｏ３催化膜的制备为例，经三次溶胶凝胶过程，可制得无裂缺的厚度为９μｍ的Ｐｄ／γＡｌ２Ｏ３催化膜，膜材料的平均孔直径为６ｎｍ，Ｐｄ被均匀地分布在膜的顶层，其平均粒径为２３ｎｍ．