Optical investigation of cavitation erosion by laser-induced bubble collapse

By means of a new force sensor based on optical beam deflection (OBD), the mechanical effects of laser-matter interaction underwater at different incident laser energy are investigated in detail. The experimental results show that a target underwater is impacted in turn by laser-plasma ablation force and high-speed liquid-jet impulse induced by bubbles collapse in the vicinity of a solid boundary. Furthermore, the amplitudes of the two forces increase monotonously with laser energy. According to the ablation force detected by the experiment and the theoretical relationship between laser intensity and ablation pressure, the value of liquid-jet impact against a solid boundary can be easily obtained. In addition, based on the model of a collapsing bubble, some characteristic parameters, such as the liquid-jet impact velocity, the maximum bubble radius, the bubble energy can also be obtained at different laser energy, which are valuable in the corresponding research fields.     

Selected-area growth of carbon nanotubes by the combination of focused ion beam and chemical vapor deposition techniques.

In this article, we report a technique for growing carbon nanotubes in a more controllable fashion, which enables us to synthesize nanotubes directly in various forms of designed patterns. This nanofabrication process is based on a combination of focused ion beam (FIB) and chemical vapor deposition (CVD) techniques. In this process, arrays of conductive patterns were first deposited on silicon substrates by directing a gaseous compound (C(9)H(16)Pt) via the capillary needle-sized nozzles within a FIB system. The substrates were then coated with catalyst and further modified by the FIB to localize the position of the catalyst. Finally, the growth of carbon nanotubes on the designed substrates was carried out by CVD of hydrocarbon gases. This fabrication technique has the advantage of positioning carbon nanotubes in selected locations. This may open up opportunities for the direct synthesis of carbon nanotubes onto almost any substrate material, thus allowing fabrication of carbon nanotube-based devices.     

Bending loss measurement using a fiber cavity ringdown scheme

A novel sensitive technique for the determination of losses in fiber cavities is presented. The method is based on the cavity ringdown scheme implemented in silica-based single-mode fibers. Bending losses of fiber cavities of different lengths have been measured showing all an oscillating behavior with respect to the curvature radius of the fiber as predicted by a theoretical model. The best minimum detectable absorbance per cavity pass achieved by this new method is 1.72×10⁻³ dB within a 10 m-long cavity. This limit suffices well for an accurate determination of optical bending losses even in bend-insensitive fibers. Furthermore, the comparison of the measured bending losses with a theoretical model allows the extraction of different fiber parameters. Good agreement has been found between the experimentally derived parameters and literature data.     

短脉冲激光尾流场中的前向Raman散射

用212维粒子模拟分析了前向Raman散射对激光尾流场加速电子的影响.前向Raman散射使脉冲长度在传播方向上被拉长，脉冲后沿变陡，产生的尾流场相速度明显减小，而且超热电子的最大动能明显小于理论估计值.此外激光频率整体向低频移动.     

双阱结构含时量子输运的微扰论及输运方程

利用Lewis-Riesenfeld不变量理论和与不变量有关的幺正变换方法研究了双阱结构含时量子 输运的微扰论.获得了双阱内含时薛定谔方程的精确解的完备集，在此基础上，把双阱与左 右热库的相互作用作为微挠，获得了双阱结构一阶近似下的输运方程，并在绝热近似下提供 了一种用于研究量子输运过程中几何相因子(Berry相因子)的方法. 关键词： 含时量子输运 输运方程 不变量 几何相因子     

Carrier diffusion in InGaAs/GaAs quantum wells grown on vicinal GaAs(0 0 1) substrates

We have investigated the influence of vicinal GaAs substrates on the optical and electronic properties of InGaAs/GaAs quantum wells (QWs). A single In_0.10Ga_0.90As QW was grown by molecular-beam epitaxy on a vicinal GaAs(0 0 1) substrate with a miscut angle of 0° (nominal), 2°, 4° and 6° towards [1 1 0]. The carrier diffusion was obtained by a micro-photoluminescence scan technique that permits to observe the effective diffusion length characterized by the lateral spread of carriers in the QW followed by radiative recombination. The carrier diffusion length was obtained parallel (L_||) and perpendicular (L) to the atomic steps. The diffusion length decreases as the temperature increases up to 100 K. Above this temperature we found different behaviours that depend on the sample miscut angle.     

Synthesis of all diastereomeric methyl 2,5-anhydro-3-deoxy-hexonates: precursors to C-2-deoxynucleosides and THF-templated γ- and δ-amino acids

Efficient syntheses of all diastereomers of methyl 2,5-anhydro-3-deoxy-hexonate from mannono- or gulono-lactones provide precursors for C-nucleosides of 2-deoxyribose and for THF-templated γ- and δ-amino acids.     

Material-Adapted Design of Textile-Reinforced Composite Structures with Optimized Vibro-Acoustic and Damping Properties Including Shear Effects

Advanced analytical models have been developed at the ILK, which offer a possibility of calculating the vibro-acoustic and damping behavior of textile-reinforced composite shells and plates with account of shear effects. The simulation models elaborated have been verified on selected examples, and the analytical results were fully corroborated by accompanying numerical calculations for typical lay-ups.__________Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 41, No. 3, pp. 289–302, May–June, 2005.     

Measurement of the Strong Interaction Shift and Width of the Ground State of Pionic Hydrogen

Hyperfine Interactions - An experiment to measure the strong interaction width (Γ1s ) and shift (ε1s ) of the ground state of pionic hydrogen (π?p), in order to determine the...     

Universality and summability of trigonometric polynomials and trigonometric series

Periodica Mathematica Hungarica -